Light Oil Recovery From Cyclic CO2 Injection: Influence of Gravity Segregation and Remaining Oil

1990 ◽  
Author(s):  
J. Thomas ◽  
T.V. Berzins ◽  
T.G. Monger ◽  
Z.A. Bassiouni
Keyword(s):  
Oil Recovery ◽  
Co2 Injection ◽  
Gravity Segregation ◽  
Remaining Oil ◽  
Light Oil

Geochemical Modeling of Petrophysical Alteration Effect on CO2 Injectivity in Carbonate Rocks

2021 ◽  
Author(s):  
Fabio Bordeaux Rego ◽  
Shayan Tavassoli ◽  
Esmail Eltahan ◽  
Kamy Sepehrnoori
Keyword(s):  
Oil Recovery ◽  
Chemical Equilibrium ◽  
Carbonate Rocks ◽  
Reactive Transport ◽  
History Matching ◽  
Geochemical Modeling ◽  
Mineral Dissolution ◽  
Co2 Injection ◽  
Carbon Dioxide Injection ◽  
Gravity Segregation

Abstract Carbon dioxide injection into sedimentary formations has been widely used in enhanced oil recovery (EOR) and geological-storage projects. Several field cases have shown an increase in water injectivity during CO2 Water-Alternating-Gas (WAG) projects. Although there is consensus that the rock-fluid interaction is the main mechanism, modeling this process is still challenging. Our main goal is to validate a physically based model on experimental observations and use the validated model to predict CO2 injectivity alteration based on geochemical reactions in carbonate rocks. In this paper, we present a new method for CO2 reactive transport in porous media and its impact on injectivity. We hypothesize that if CO2 solubilizes in the connate water, then it induces a shift in chemical equilibrium that stimulates mineral dissolution. Consequently, porosity and permeability will increase, and cause alterations to well injectivity. We develop a predictive model to capture this phenomenon and validate the model against available data in the literature. We use UTCOMP-IPhreeqc, which is a fully coupled fluid-flow and geochemical simulator to account for rock/hydrocarbon/water interactions. In addition, we perform several experiments to test CO2/water slug sizes, mineralogy assembly, injected brine composition, and gravity segregation combined with the effect of heterogeneity. Coreflood simulations using chemical equilibrium and kinetics indicate mineral dissolution at reservoir conditions. The results suggest that the intensity of rock dissolution depends on formation mineralogy and brine composition as carbonate systems work as buffers. Additionally, we show that prolonged CO2 and brine injection induces petrophysical alteration close to the injection region. Our field-scale heterogeneous reservoir simulations show that permeability alteration calculated based on Carman-Kozeny correlation and wormhole formulation had the same results. Furthermore, we observed that water injectivity increased by almost 20% during subsequent cycles of CO2-WAG. This finding is also supported by the Pre-Salt carbonate field data available in the literature. In the case of continuous CO2 injection, the carbonate dissolution was considerably less severe in comparison with WAG cases, but injectivity increased due to unfavorable CO2 mobility. With the inclusion of gravity segregation, we report that the injectivity doubles in magnitude. The simulations show more extensive dissolution at the upper layers of the reservoir, suggesting that preferential paths are the main cause of this phenomenon. The ideas presented in this paper can be utilized to improve history-matching of production data and consequently reduce the uncertainty inherent to CO2-EOR and carbon sequestration projects.

Study of cyclic CO2 injection for low-pressure light oil recovery under reservoir conditions

Fuel ◽  
2016 ◽  
Vol 174 ◽  
pp. 296-306 ◽  
Author(s):  
Jinhua Ma ◽  
Xiangzeng Wang ◽  
Ruimin Gao ◽  
Fanhua Zeng ◽  
Chunxia Huang ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Low Pressure ◽  
Co2 Injection ◽  
Reservoir Conditions ◽  
Light Oil

Light Oil Recovery From Cyclic CO2 Injection: Influence of Low Pressures Impure CO2, and Reservoir Gas

1991 ◽  
Vol 6 (01) ◽  
pp. 25-32 ◽  
Author(s):  
T.G. Monger ◽  
J.C. Ramos ◽  
Jacob Thomas
Keyword(s):  
Oil Recovery ◽  
Co2 Injection ◽  
Light Oil ◽  
Low Pressures

Feasibility of Cyclic CO2 Injection for Light-Oil Recovery

1991 ◽  
Vol 6 (02) ◽  
pp. 179-184 ◽  
Author(s):  
G.A. Thomas ◽  
T.G. Monger-McClure
Keyword(s):  
Oil Recovery ◽  
Co2 Injection ◽  
Light Oil

Light Oil Recovery From Cyclic CO2 Injection: Influence of Drive Gas, CO2 Injection Rate, and Reservoir Dip

1992 ◽  
Author(s):  
Fatma Karim ◽  
T.V. Berzins ◽  
P.A. Schenewerk ◽  
Z.A. Bassiouni ◽  
J.M. Wolcott
Keyword(s):  
Oil Recovery ◽  
Injection Rate ◽  
Co2 Injection ◽  
Light Oil

scholarly journals The Effect of Carbonyl and Hydroxyl Compounds on Swelling Factor, Interfacial Tension, and Viscosity in CO2 Injection: A Case Study on Aromatic Oils

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 94
Author(s):  
Asep Kurnia Permadi ◽  
Egi Adrian Pratama ◽  
Andri Luthfi Lukman Hakim ◽  
Doddy Abdassah
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Viscosity Reduction ◽  
Co2 Injection ◽  
Minimum Miscibility Pressure ◽  
Lower Viscosity ◽  
Hydroxyl Compounds ◽  
Swelling Factor

A factor influencing the effectiveness of CO2 injection is miscibility. Besides the miscible injection, CO2 may also contribute to oil recovery improvement by immiscible injection through modifying several properties such as oil swelling, viscosity reduction, and the lowering of interfacial tension (IFT). Moreover, CO2 immiscible injection performance is also expected to be improved by adding some solvent. However, there are a lack of studies identifying the roles of solvent in assisting CO2 injection through observing those properties simultaneously. This paper explains the effects of CO2–carbonyl and CO2–hydroxyl compounds mixture injection on those properties, and also the minimum miscibility pressure (MMP) experimentally by using VIPS (refers to viscosity, interfacial tension, pressure–volume, and swelling) apparatus, which has a capability of measuring those properties simultaneously within a closed system. Higher swelling factor, lower viscosity, IFT and MMP are observed from a CO2–propanone/acetone mixture injection. The role of propanone and ethanol is more significant in Sample A1, which has higher molecular weight (MW) of C7+ and lower composition of C1–C4, than that in the other Sample A9. The solvents accelerate the ways in which CO2 dissolves and extracts oil, especially the extraction of the heavier component left in the swelling cell.

scholarly journals Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2305
Author(s):  
Xiangbin Liu ◽  
Le Wang ◽  
Jun Wang ◽  
Junwei Su
Keyword(s):  
Oil Recovery ◽  
Flow Behavior ◽  
Ct Scanning ◽  
Water Flooding ◽  
Pore Scale ◽  
Simulation Techniques ◽  
Three Phase ◽  
Remaining Oil ◽  
Three Phase Flow ◽  
Displacement Force

The particles, water and oil three-phase flow behaviors at the pore scale is significant to clarify the dynamic mechanism in the particle flooding process. In this work, a newly developed direct numerical simulation techniques, i.e., VOF-FDM-DEM method is employed to perform the simulation of several different particle flooding processes after water flooding, which are carried out with a porous structure obtained by CT scanning of a real rock. The study on the distribution of remaining oil and the displacement process of viscoelastic particles shows that the capillary barrier near the location with the abrupt change of pore radius is the main reason for the formation of remaining oil. There is a dynamic threshold in the process of producing remaining oil. Only when the displacement force exceeds this threshold, the remaining oil can be produced. The flow behavior of particle–oil–water under three different flooding modes, i.e., continuous injection, alternate injection and slug injection, is studied. It is found that the particle size and the injection mode have an important influence on the fluid flow. On this basis, the flow behavior, pressure characteristics and recovery efficiency of the three injection modes are compared. It is found that by injecting two kinds of fluids with different resistance increasing ability into the pores, they can enter into different pore channels, resulting in the imbalance of the force on the remaining oil interface and formation of different resistance between the channels, which can realize the rapid recovery of the remaining oil.

The Mechanism of Flue Gas Injection for Enhanced Light Oil Recovery

2004 ◽  
Vol 126 (2) ◽  
pp. 119-124 ◽  
Author(s):  
O. S. Shokoya ◽  
S. A. (Raj) Mehta ◽  
R. G. Moore ◽  
B. B. Maini ◽  
M. Pooladi-Darvish ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Flue Gas ◽  
Gas Injection ◽  
Cost Effective ◽  
Air Injection ◽  
Oil Reservoirs ◽  
Flue Gases ◽  
Low Permeability ◽  
Light Oil ◽  
Light Oil Reservoirs

Flue gas injection into light oil reservoirs could be a cost-effective gas displacement method for enhanced oil recovery, especially in low porosity and low permeability reservoirs. The flue gas could be generated in situ as obtained from the spontaneous ignition of oil when air is injected into a high temperature reservoir, or injected directly into the reservoir from some surface source. When operating at high pressures commonly found in deep light oil reservoirs, the flue gas may become miscible or near–miscible with the reservoir oil, thereby displacing it more efficiently than an immiscible gas flood. Some successful high pressure air injection (HPAI) projects have been reported in low permeability and low porosity light oil reservoirs. Spontaneous oil ignition was reported in some of these projects, at least from laboratory experiments; however, the mechanism by which the generated flue gas displaces the oil has not been discussed in clear terms in the literature. An experimental investigation was carried out to study the mechanism by which flue gases displace light oil at a reservoir temperature of 116°C and typical reservoir pressures ranging from 27.63 MPa to 46.06 MPa. The results showed that the flue gases displaced the oil in a forward contacting process resembling a combined vaporizing and condensing multi-contact gas drive mechanism. The flue gases also became near-miscible with the oil at elevated pressures, an indication that high pressure flue gas (or air) injection is a cost-effective process for enhanced recovery of light oils, compared to rich gas or water injection, with the potential of sequestering carbon dioxide, a greenhouse gas.

Sign in / Sign up

Export Citation Format

Share Document