Foam Flow in Different Pore Systems—Part 2: The Roles of Pore Attributes on the Limiting Capillary Pressure, Trapping Coefficient, and Relative Permeability of Foamed Gas

SPE Journal ◽  
2021 ◽  
pp. 1-23
Author(s):  
Abdulrauf Rasheed Adebayo

Summary The limiting capillary pressure of foam (Pc*) and foam trapping in porous media are pore-scale foam properties that affect foam transport in porous media. They are strongly influenced by the characteristics of rock pores and throats. Because of experimental limitations, these foam properties are difficult to measure at core scale. As a result, our understanding of their relationship with different pore characteristics is limited. In this paper, novel coreflood and graphical analysis techniques were used to measure Pc* and the foam-trapping coefficient (FTC) at core scale. FTC is a new parameter synonymous to Land’s (1968) trapping coefficient, which describes foam-trapping behavior across an entire range of saturation as opposed to a single endpoint trapped saturation. The scalability of these two foam properties with permeability and other pore characteristics [average pore size (PS), average throat size (TS), average aspect ratio (AR), coordination number (CN), surface area/volume ratio, and reservoir-quality index (RQI)] were also investigated. Pore characteristics of 12 different rock samples were measured from 3D pore-network models generated from high-resolution X-raycomputed-microtomography images. The heterogeneity of the rock samples were quantified by the Dykstra-Parsons index (Dysktra and Parsons 1950), while the RQI and J-function methods were used to classify them according to their storage and flow properties. Each of the measured pore characteristics and their combination [combined pore character (CPC)] were then correlated with Pc* and FTC to understand their respective roles. Furthermore, the data points obtained from the graphical analysis of the coreflood data provided the required input data for a mechanistic foam model for relative permeability of foamed gas (Kovscek and Radke 1994). The estimated relative permeability of foamed gas was then used to study foam mobility in the different pore geometries. The overall results showed the following: P c * has strong negative correlations with all pore characteristics except AR, which has a weak positive correlation. P c * has the strongest correlation with RQI, CPC, and permeability; a moderate correlation with CN and TS; and a very weak correlation with PS. Foam trapping has positive correlations with all pore characteristics except AR, which has a negative correlation. Low AR appears to be responsible for significant trapping of foam in high-permeabilityrocks. Low AR favors more foam trapping, while high AR favors trapping of oil and gas during water imbibition in water-wetrocks. Foam trapping appears to have the dominant control on foam mobility.

Author(s):  
Stefan Doser ◽  
Sang-Joon John Lee

This work investigates the special case of in-plane fluid flow of a Newtonian incompressible fluid at low Reynolds numbers across a paper-thin porous medium in a confined conduit. Fluid transport in sheets with these characteristics are used in emerging devices such as microscale paper-based analytical devices (μPADs) and “e-paper” displays. Darcy’s law is applied and tested to determine if experimentally measured pressures at two flow rates of 5 μL/min and 10 μL/min agree with predicted values. A test device was designed using kinematic design principles to ensure a deterministic 318 μm gap that directs prescribed flow, unidirectionally across porous filter paper. The paper used was Grade 50 Whatman filter paper with an average pore size of 2.7 μm. Pressure was measured along the direction of flow over a 125 mm distance by six pressure ports placed at uniform increments of 25 mm to determine a profile of pressure along the flow path. Measurements were recorded at discrete time intervals over a period up to 48 hours with at least four replicates. Experimental measurements of the pressure profile show a linear relationship as predicted by Darcy’s law, allowing material permeability to be calculated. Among replicates measured under the same set of controllable conditions, experimental data also show a nonlinear relationship. The nonlinearity suggests evidence of transition into an inertia region, providing insight into the factors and behavior of the Darcy-Forchheimer transition for this special case of porous media flow.


2012 ◽  
Vol 616-618 ◽  
pp. 964-969 ◽  
Author(s):  
Yue Yang ◽  
Xiang Fang Li ◽  
Ke Liu Wu ◽  
Meng Lu Lin ◽  
Jun Tai Shi

Oil and water relative permeabilities are main coefficients in describing the fluid flow in porous media; however, oil and water relative permeability for low - ultra low perm oil reservoir can not be obtained from present correlations. Based on the characteristics of oil and water flow in porous media, the model for calculating the oil and water relative permeability of low and ultra-low perm oil reservoirs, which considering effects of threshold pressure gradient and capillary pressure, has been established. Through conducting the non-steady oil and water relative permeability experiments, oil and water relative permeability curves influenced by different factors have been calculated. Results show that: the threshold pressure gradient more prominently affects the oil and water relative permeability; capillary pressure cannot influence the water relative permeability but only the oil relative permeability. Considering effects of threshold pressure gradient and capillary pressure yields the best development result, and more accordant with the flow process of oil and water in low – ultra low perm oil reservoirs.


SPE Journal ◽  
2017 ◽  
Vol 22 (03) ◽  
pp. 940-949 ◽  
Author(s):  
Edo S. Boek ◽  
Ioannis Zacharoudiou ◽  
Farrel Gray ◽  
Saurabh M. Shah ◽  
John P. Crawshaw ◽  
...  

Summary We describe the recent development of lattice Boltzmann (LB) and particle-tracing computer simulations to study flow and reactive transport in porous media. First, we measure both flow and solute transport directly on pore-space images obtained from micro-computed-tomography (CT) scanning. We consider rocks with increasing degree of heterogeneity: a bead pack, Bentheimer sandstone, and Portland carbonate. We predict probability distributions for molecular displacements and find excellent agreement with pulsed-field-gradient (PFG) -nuclear-magnetic-resonance (NMR) experiments. Second, we validate our LB model for multiphase flow by calculating capillary filling and capillary pressure in model porous media. Then, we extend our models to realistic 3D pore-space images and observe the calculated capillary pressure curve in Bentheimer sandstone to be in agreement with the experiment. A process-based algorithm is introduced to determine the distribution of wetting and nonwetting phases in the pore space, as a starting point for relative permeability calculations. The Bentheimer relative permeability curves for both drainage and imbibition are found to be in good agreement with experimental data. Third, we show the speedup of a graphics-processing-unit (GPU) algorithm for large-scale LB calculations, offering greatly enhanced computing performance in comparison with central-processing-unit (CPU) calculations. Finally, we propose a hybrid method to calculate reactive transport on pore-space images by use of the GPU code. We calculate the dissolution of a porous medium and observe agreement with the experiment. The LB method is a powerful tool for calculating flow and reactive transport directly on pore-space images of rock.


AIChE Journal ◽  
2003 ◽  
Vol 49 (10) ◽  
pp. 2472-2486 ◽  
Author(s):  
C. D. Tsakiroglou ◽  
M. A. Theodoropoulou ◽  
V. Karoutsos

2014 ◽  
Vol 804 ◽  
pp. 99-102
Author(s):  
Yeong Seok Yoo ◽  
Jun Ho Jo ◽  
Gyu Tae Seo

In this study, carbonized porous media was manufactured using sewage sludge and analyzed for pollutants removal characteristics. Sewage sludge produced by activated sludge sewage treatment contained much organics to be carbonized, so it was mixed with other mixtures, extruded and formed in ∅ 5~10 mm ball shape, and sintered at 900°C and 1 hour in furnace for carbonization under N2 purge. The characteristics of the porous media was BET 35 m2/g and average pore size 39.3Å, pore volume 0.0092 cm3/g, Iodine number 45.9 and bulk density 0.91 cm3/g. Experiments were performed for SS, phosphate, nitrate and heavy metals (Cu, Zn). Its removal characteristics of SS and fertilizer components were compared with gravel’s used in filtration and its heavy metals removal was characterized by derivation of its adsorption equilibrium equations. In result, the carbonized porous media could be utilized as massive adsorption media for pollutant removal or fertilizer adsorption in fields of roof planting or non-point source pollutants control.


2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Olugbenga Falode ◽  
Edo Manuel

An understanding of the mechanisms by which oil is displaced from porous media requires the knowledge of the role of wettability and capillary forces in the displacement process. The determination of representative capillary pressure (Pc) data and wettability index of a reservoir rock is needed for the prediction of the fluids distribution in the reservoir: the initial water saturation and the volume of reserves. This study shows how wettability alteration of an initially water-wet reservoir rock to oil-wet affects the properties that govern multiphase flow in porous media, that is, capillary pressure, relative permeability, and irreducible saturation. Initial water-wet reservoir core samples with porosities ranging from 23 to 33%, absolute air permeability of 50 to 233 md, and initial brine saturation of 63 to 87% were first tested as water-wet samples under air-brine system. This yielded irreducible wetting phase saturation of 19 to 21%. The samples were later tested after modifying their wettability to oil-wet using a surfactant obtained from glycerophtalic paint; and the results yielded irreducible wetting phase saturation of 25 to 34%. From the results of these experiments, changing the wettability of the samples to oil-wet improved the recovery of the wetting phase.


Sign in / Sign up

Export Citation Format

Share Document