scholarly journals Phosphated Avocado Seed: A Renewable Biomaterial for Preparing a Flame Retardant Biofiller

2021 ◽  
Author(s):  
DAVID Zuluaga-Parra ◽  
L.F Ramos-deValle ◽  
Saul Sanchez ◽  
J.R. Torres-Lubián ◽  
J.A. Rodríguez-Gonzalez ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Chemical Modification ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Morphological Changes ◽  
Ethylene Vinyl Acetate ◽  
Chemically Modified ◽  
Air Atmosphere ◽  
Thermal Stability Of ◽  
Avocado Seed

Abstract The cellulose and starch present in the avocado seed can be chemically modified to obtain biofillers with fire retarding characteristics. The resulting composites could be used as substitute of the corresponding halogenated composites. For this, the avocado seed was first washed, dehydrated and pulverized, and thereafter, chemically modified with phosphoric acid in the presence of urea. This was studied using infrared spectroscopy, nuclear magnetic resonance and X-Ray photoelectron spectroscopy, in order to determine the resulting chemical structure and confirm the presence of the proposed functional groups. In addition, scanning electron microscopy and elemental analysis were used, respectively, to establish the resulting morphological changes, as well as the elements present on the surface of the modified material. Thermogravimetric analysis was also carried out in order to establish the thermal stability of the material and predict the effect on the flame retardancy due to the mentioned chemical modification. Further tests established that the obtained modified structure and morphology of the avocado seed was highly dependent on the method used to dehydrate the pulverized avocado seed. It was also determined that chemical modification greatly increased the thermal stability of the avocado seed in air atmosphere. The flame-retardant effect of the modified avocado seed was assessed in polyethylene/ethylene-vinyl-acetate (PE/EVA) composites via cone calorimeter tests. These results showed that the modified avocado seed decreased the peak of the heat release rate (pHRR) by 50% and the total heat released (THR) by 15%. This phosphated avocado seed could be a good option as a renewable biofiller for polymer composites with enhanced flame-retardant properties.

Preparation of lignin–silica hybrids and its application in intumescent flame-retardant poly(lactic acid) system

2012 ◽  
Vol 24 (8) ◽  
pp. 738-746 ◽  
Author(s):  
Rui Zhang ◽  
Xifu Xiao ◽  
Qilong Tai ◽  
Hua Huang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Intumescent Flame Retardant ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Silica Hybrids ◽  
Thermal Stability Of

Lignin–silica hybrids (LSHs) were prepared by sol–gel method and characterized by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). LSH and ammonium polyphosphate (APP) were added into poly(lactic acid) (PLA) as a novel intumescent flame-retardant (IFR) system to improve the flame retardancy of PLA. The flame-retardant effect of APP and LSH in PLA was studied using limiting oxygen index (LOI), vertical burning (UL-94) tests and cone calorimeter. The thermal stability of PLA/APP/LSH composites was evaluated by thermogravimetric analysis (TGA). Additionally, the morphology and components of char residues of the IFR-PLA composites were investigated by SEM and XPS. With the addition of APP/LSH to PLA system, the morphology of the char residue has obviously changed. Compared with PLA/APP and PLA/APP/lignin, a continuous and dense intumescent charring layer with more phosphor in PLA composites is formed, which exhibits better flame retardancy. All the results show that the combination of APP and LSH can improve the flame-retardant property and increase the thermal stability of PLA composites greatly.

Chemical modification results in hyperactivation and thermostabilization ofFusarium solaniglucoamylase

2007 ◽  
Vol 53 (2) ◽  
pp. 177-185 ◽  
Author(s):  
Haq Nawaz Bhatti ◽  
M. Hamid Rashid ◽  
Muhammad Asgher ◽  
Rakhshanda Nawaz ◽  
A.M. Khalid ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Chemical Modification ◽  
Soluble Starch ◽  
Water Soluble ◽  
Chemically Modified ◽  
Free Energy Of Activation ◽  
Enthalpy Of Activation ◽  
Specificity Constant ◽  
Modified Forms ◽  
Thermal Stability Of

Chemical modification of carboxyl groups of glucoamylase from a mesophilic fungus, Fusarium solani , was carried out using ethylenediamine as nucleophile in the presence of water-soluble 1-ethyl-3(3-dimethylaminopropyl)carbodiimide. Modification brought about a dramatic enhancement of catalytic activity and thermal stability of glucoamylase. Temperature and pH optima of ethylenediamine-coupled glucoamylase (ECG) increased as compared with those of native enzyme. The specificity constant (kcat/Km) of native, ECG-2, ECG-11, and ECG-17 was 136, 173, 225, and 170, respectively, at 55 °C. The enthalpy of activation (ΔH*) and free energy of activation (ΔG*) for soluble starch hydrolysis were lower for the chemically modified forms. All of the modified forms werestable at higher temperatures and possessed high ΔG* against thermal unfolding. The effects of α-chymotrypsin and subtilisin on the modified forms were activating as compared with native. Moreover, denaturation of ECG-2, ECG-11, and ECG-17 in urea at 4 mol·L–1also showed an activation trend. A possible explanation for the thermal denaturation of native and increased thermal stability of ECG-2, ECG-11, and ECG-17 at higher temperatures is also discussed.

scholarly journals Improvement of the thermal stability of dendritic silver-coated copper microparticles by surface modification based on molecular self-assembly

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Tae Hyeong Kim ◽  
Hyeji Kim ◽  
Hyo Jun Jang ◽  
Nara Lee ◽  
Kwang Hyun Nam ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Electrically Conductive ◽  
X Ray ◽  
Alkyl Chains ◽  
Conductive Film ◽  
Initial Resistance ◽  
Thermal Stability Of ◽  
Scanning Electron

AbstractIn the study reported herein, silver-coated copper (Ag/Cu) powder was modified with alkanethiols featuring alkyl chains of different lengths, namely butyl, octyl, and dodecyl, to improve its thermal stability. The modification of the Ag/Cu powders with adsorbed alkanethiols was confirmed by scanning electron microscopy with energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Each powder was combined with an epoxy resin to prepare an electrically conductive film. The results confirmed that the thermal stability of the films containing alkanethiol-modified Ag/Cu powders is superior to that of the film containing untreated Ag/Cu powder. The longer the alkyl group in the alkanethiol-modified Ag/Cu powder, the higher the initial resistance of the corresponding electrically conductive film and the lower the increase in resistance induced by heat treatment.

scholarly journals Thermal Stability of Octadecyltrichlorosilane and Perfluorooctyltriethoxysilane Monolayers on SiO2

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 210
Author(s):  
Xiangdong Yang ◽  
Haitao Wang ◽  
Peng Wang ◽  
Xuxin Yang ◽  
Hongying Mao
Keyword(s):  
Thermal Stability ◽  
Thermal Behavior ◽  
Work Function ◽  
Photoelectron Spectroscopy ◽  
Vacuum Annealing ◽  
Moderate Temperature ◽  
Ultraviolet Photoelectron Spectroscopy ◽  
X Ray ◽  
Thermal Stability Of

Using in situ ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS) measurements, the thermal behavior of octadecyltrichlorosilane (OTS) and 1H, 1H, 2H, and 2H-perfluorooctyltriethoxysilane (PTES) monolayers on SiO2 substrates has been investigated. OTS is thermally stable up to 573 K with vacuum annealing, whereas PTES starts decomposing at a moderate temperature between 373 K and 423 K. Vacuum annealing results in the decomposition of CF3 and CF2 species rather than desorption of the entire PTES molecule. In addition, our UPS results reveal that the work function (WF)of OTS remains the same after annealing; however WF of PTES decreases from ~5.62 eV to ~5.16 eV after annealing at 573 K.

Flame-retardant behaviors of aluminum phosphates coated sepiolite in epoxy resin

2020 ◽  
pp. 073490412093408
Author(s):  
Wei Yan ◽  
Pu Xie ◽  
Zhengwei Yang ◽  
Guangjin Luo ◽  
Weijiang Huang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Mechanical Performance ◽  
Oxygen Index ◽  
One Pot ◽  
Heterogeneous Precipitation ◽  
Aluminum Phosphates ◽  
Thermal Stability Of ◽  
Limited Oxygen

Aluminum phosphates coated sepiolite nanocomposite was fabricated via a simple one-pot heterogeneous precipitation strategy, and the effects of aluminum phosphates on the morphology of aluminum phosphates coated sepiolite were investigated. Moreover, the effect of aluminum phosphates coated sepiolite on the flame-retardant behavior, mechanical properties, and thermal stability of epoxy resin have been discussed. The results indicated that the introduction of only 20 wt% aluminum phosphates coated sepiolite in epoxy resin increased the limited oxygen index from 21.8% to 30.1%, thus the material met the UL-94 V-0 rating. Thermogravimetric analyses revealed that char yield increased in the presence of aluminum phosphates coated sepiolite form thermally stable carbonaceous char. Aluminum phosphates–coated sepiolite could improve the mechanical performance, thermal stability of epoxy resin.

Sign in / Sign up

Export Citation Format

Share Document