scholarly journals Self-Assembly Study of Type I Collagen Extracted from Male Wistar Hannover Rat Tail Tendons

2020 ◽  
Author(s):  
Jeimmy C. González-Masís ◽  
Jorge M. Cubero-Sesin ◽  
Yendry Regina Corrales-Ureña ◽  
Simón Guerrero ◽  
Sara González-Camacho ◽  
...  

Abstract Background: Collagen is the main structural protein in the extracellular matrix in the numerous connective tissues in the body. As the main component of connective tissue, it is the most abundant protein in mammals. Method: Collagen Type I from Wistar Hannover rat tail was obtained and it allowed to describe the thermodynamic profile during self-assembly by isothermal titration calorimetry (Nano ITC) as a novel technique. Results: The enthalpy of self-assembly of the 0,01035 moles of collagen was 33,89 mJ; relevant data in tissue engineering and 3D collagen fibrils bio-impressions organs, with a periodicity of 65 nm were obtained and characterized. Conclusions: Calorimetric analysis shows higher energy release event at the isoelectric point of the protein, suggesting an overall exothermic process due to self-assembly of the collagen and an endothermic process due to aggregation of denatured collagen.

2020 ◽  
Vol 24 (1) ◽  
Author(s):  
Jeimmy González-Masís ◽  
Jorge M. Cubero-Sesin ◽  
Simón Guerrero ◽  
Sara González-Camacho ◽  
Yendry Regina Corrales-Ureña ◽  
...  

Abstract Background Collagen, the most abundant protein in the animal kingdom, represents a promising biomaterial for regenerative medicine applications due to its structural diversity and self-assembling complexity. Despite collagen’s widely known structural and functional features, the thermodynamics behind its fibrillogenic self-assembling process is still to be fully understood. In this work we report on a series of spectroscopic, mechanical, morphological and thermodynamic characterizations of high purity type I collagen (with a D-pattern of 65 nm) extracted from Wistar Hannover rat tail. Our herein reported results can be of help to elucidate differences in self-assembly states of proteins using ITC to improve the design of energy responsive and dynamic materials for applications in tissue engineering and regenerative medicine. Methods Herein we report the systematic study on the self-assembling fibrillogenesis mechanism of type I collagen, we provide morphological and thermodynamic evidence associated to different self-assembly events using ITC titrations. We provide thorough characterization of the effect of pH, effect of salts and protein conformation on self-assembled collagen samples via several complementary biophysical techniques, including circular dichroism (CD), Fourier Transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), scanning electron microscopy (SEM), dynamic mechanical thermal analysis (DMTA) and thermogravimetric analysis (TGA). Results Emphasis was made on the use of isothermal titration calorimetry (ITC) for the thermodynamic monitoring of fibrillogenesis stages of the protein. An overall self-assembly enthalpy value of 3.27 ± 0.85 J/mol was found. Different stages of the self-assembly mechanism were identified, initial stages take place at pH values lower than the protein isoelectric point (pI), however, higher energy release events were recorded at collagen’s pI. Denatured collagen employed as a control exhibited higher energy absorption at its pI, suggesting different energy exchange mechanisms as a consequence of different aggregation routes. Graphical abstract


2020 ◽  
Author(s):  
Jeimmy C. González-Masís ◽  
Jorge M. Cubero-Sesin ◽  
Simón Guerrero ◽  
Sara González-Camacho ◽  
Yendry Regina Corrales-Ureña ◽  
...  

Abstract BackgroundCollagen, the most abundant protein in the animal kingdom, represents a promising biomaterial for regenerative medicine applications due to its structural diversity and self-assembling complexity. Despite collagen’s widely known structural and functional features, the thermodynamics behind its fibrillogenic self-assembling process is still to be fully understood. In this work we report on a series of spectroscopic, mechanical, morphological and thermodynamic characterizations of high purity type I collagen (with a D-pattern of 65 nm) extracted from Wistar Hannover rat tail. Our herein reported results can be of help to elucidate differences in self-assembly states of proteins using ITC to improve the design of energy responsive and dynamic materials for applications in tissue engineering and regenerative medicine.MethodsHerein we report the systematic study on the self-assembling fibrillogenesis mechanism of type I collagen, we provide morphological and thermodynamic evidence associated to different self-assembly events using ITC titrations. We provide thorough characterization of the effect of pH, effect of salts and protein conformation on self-assembled collagen samples via several complementary biophysical techniques, including circular dichroism (CD), Fourier Transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), scanning electron microscopy (SEM), dynamic mechanical thermal analysis (DMTA) and thermogravimetric analysis (TGA).ResultsEmphasis was made on the use of isothermal titration calorimetry (ITC) for the thermodynamic monitoring of fibrillogenesis stages of the protein. An overall self-assembly enthalpy value of 3.27 ± 0.85 J/mol was found. Different stages of the self-assembly mechanism were identified, initial stages take place at pH values lower than the protein isoelectric point (pI), however, higher energy release events were recorded at collagen's pI. Denatured collagen employed as a control exhibited higher energy absorption at its pI, suggesting different energy exchange mechanisms as a consequence of different aggregation routes.


1995 ◽  
Vol 03 (04) ◽  
pp. 1033-1039
Author(s):  
JOHN PARKINSON ◽  
KARL E. KADLER ◽  
ANDY BRASS

The development of shape and form is intrinsic to the structure and function of many biological macromolecules including tubulin, actin and collagen. Type I collagen is a major structural protein in the body, providing mechanical strength for tissues such as bone and skin. It is present in the form of fibrils which display a regular banding pattern known as D-periodicity (where D = 67 nm). Type I collagen is a long rod-like molecule (300 nm ×1.5 nm) consisting of a triple helix formed from three polypeptide chains. In vivo and in vitro studies have shown that collagen molecules self-assemble in a regular D-staggered array to form striated fibrils. Further studies have shown that the process, termed fibrillogenesis, is entropy driven. A model based on diffusion limited aggregation was used to investigate the properties of rod self-assembly. This simple model reproduced several experimentally observed features of collagen fibril morphology including a linear mass/unit length profile and a preference for tip growth.


TECHNOLOGY ◽  
2017 ◽  
Vol 05 (04) ◽  
pp. 185-195 ◽  
Author(s):  
Kathryn E. Drzewiecki ◽  
Juilee N. Malavade ◽  
Ijaz Ahmed ◽  
Christopher J. Lowe ◽  
David I. Shreiber

As a biomaterial, collagen has been used throughout tissue engineering and regenerative medicine. Collagen is native to the body, is highly biocompatible, and naturally promotes cell adhesion and regeneration. However, collagen fibers and the inherent weak mechanical properties of collagen hydrogels interfere with further development of collagen as a bio-ink. Herein, we demonstrate the use of a modified type-I collagen, collagen methacrylamide (CMA), as a fibril-forming bio-ink for free-form fabrication of scaffolds. Like collagen, CMA can self-assemble into a fibrillar hydrogel at physiological conditions. In contrast, CMA is photocrosslinkable and thermoreversible, and photocrosslinking eliminates thermoreversibility. Free-form fabrication of CMA was performed through self-assembly of the CMA hydrogel, photocrosslinking the structure of interest using a photomask, and cooling the entire hydrogel, which results in cold-melting of unphotocrosslinked regions. Printed hydrogels had a resolution on the order of [Formula: see text]350[Formula: see text][Formula: see text]m, and can be fabricated with or without cells and maintain viability or be further processed into freeze-dried sponges, all while retaining pattern fidelity. A subcutaneous implant study confirmed the biocompatibility of CMA in comparison to collagen. Free-form fabrication of CMA allows for printing of macroscale, customized scaffolds with good pattern fidelity and can be implemented with relative ease for continued research and development of collagen-based scaffolds in tissue engineering.


2021 ◽  
Vol 8 (3) ◽  
pp. 39
Author(s):  
Britani N. Blackstone ◽  
Summer C. Gallentine ◽  
Heather M. Powell

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.


1991 ◽  
Vol 274 (2) ◽  
pp. 615-617 ◽  
Author(s):  
P Kern ◽  
M Menasche ◽  
L Robert

The biosynthesis of type I, type V and type VI collagens was studied by incubation of calf corneas in vitro with [3H]proline as a marker. Pepsin-solubilized collagen types were isolated by salt fractionation and quantified by SDS/PAGE. Expressed as proportions of the total hydroxyproline solubilized, corneal stroma comprised 75% type I, 8% type V and 17% type VI collagen. The rates of [3H]proline incorporation, linear up to 24 h for each collagen type, were highest for type VI collagen and lowest for type I collagen. From pulse-chase experiments, the calculated apparent half-lives for types I, V and VI collagens were 36 h, 10 h and 6 h respectively.


Author(s):  
Philip Peter Roessler ◽  
Turgay Efe ◽  
Dieter Christian Wirtz ◽  
Frank Alexander Schildberg

AbstractCartilage regeneration with cell-free matrices has developed from matrix-associated autologous cartilage cell transplantation (MACT) over ten years ago. Adjustments to the legal framework and higher hurdles for cell therapy have led to the procedures being established as an independent alternative to MACT. These procedures, which can be classified as matrix-induced autologous cartilage regeneration (MACR), all rely on the chemotactic stimulus of a cross-linked matrix, which mostly consists of collagens. Given the example of a commercially available type I collagen hydrogel, the state of clinical experience with MACR shall be summarized and an outlook on the development of the method shall be provided. It has been demonstrated in the clinical case series summarized here over the past few years that the use of the matrix is not only safe but also yields good clinical-functional and MR-tomographic results for both small (~ 10 mm) and large (> 10 mm) focal cartilage lesions. Depending on the size of the defect, MACR with a collagen type I matrix plays an important role as an alternative treatment method, in direct competition with both: microfracture and MACT.


Author(s):  
Nashat Saeid Ibrahim ◽  
Mohammed Ahmed El-Sayed ◽  
Heba Abdelwahab Mahmoud Assi ◽  
Ahmed Enab ◽  
Abdel-Moneim Eid Abdel-Moneim

Abstract Background Detecting the genetic and physiological variations in two Japanese quail strains could be used to suggest a new avian model for future breeding studies. Consequently, two estimations were performed on two Japanese quail strains: gray quail strain (GJQS) and white jumbo quail strain (WJQS). The first estimation was conducted on carcass characteristics, breast muscles, breast concentration of collagen type I, and body measurements. In contrast, blood samples were collected for the second estimation for genomic DNA extraction and genetic analysis. Results A total of 62 alleles out of 97 specific alleles (63.92%) were detected overall loci (14 microsatellite loci) for the two strains. A total of 27 specific alleles of WJQS were observed, and 35 were obtained for GJQS. The percentage of similarity was 48.09% ranged from 4.35 with UBC001 to 100% with GUJ0051. WJQS had greater body weights and a higher value of pectoral muscle and supracoracoideus muscle than GJQS. The breast muscles of GJQS exhibited a higher concentration of type I collagen than the WJQS. Furthermore, males showed higher concentrations of collagen type I than females. WJQS showed a higher body length, chest girth, chest length, thigh length, thigh girth, drumstick length, and drumstick girth (cm) than GJQS. WJQS showed more significant differences in carcass traits compared with GJQS. Conclusion The physiological differences between WJQS and GJQS were ascertained with microsatellite markers, which indicated high polymorphism between these strains. These observations provided a scientific basis for evaluating and utilizing the genetic resources of WJQS and GJQS in a future genetic improvement program.


2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 1094.1-1094
Author(s):  
A. S. Siebuhr ◽  
P. Juhl ◽  
M. Karsdal ◽  
A. C. Bay-Jensen

Background:Interleukin 6 (IL-6) is known to have both pro- and anti-inflammatory properties, depending on the receptor activation. The classical IL-6 signaling via the membrane bound receptor is mainly anti-inflammatory, whereas signaling through the soluble receptor (sIL-6R) is pro-inflammatory/pro-fibrotic. However, the direct fibrotic effect of IL-6 stimulation on dermal fibroblasts is unknown.Objectives:We investigated the fibrotic effect of IL-6 + sIL-6R in a dermal fibroblast model and assessed fibrosis by neo-epitope biomarkers of extracellular matrix proteins.Methods:Primary healthy human dermal fibroblasts were grown for up to 17 days in DMEM medium with 0.4% fetal calf serum, ficoll (to produce a crowded environment) and ascorbic acid. IL-6 [1-90 nM]+sIL-6R [0.1-9 nM] alone or in combination with TGFβ [1 nM] were tested in three different donors. TGFβ [1 nM], PDGF-AB [3 nM] and non-stimulated cells (w/o) were used as controls. Tocilizumab (TCZ) with TGFβ + IL-6 + sIL-6R stimulation was tested in one donor. Collagen type I, III and VI formation (PRO-C1, PRO-C3 and PRO-C6) and fibronectin (FBN-C) were evaluated by validated ELISAs (Nordic Bioscience). Western blot analysis investigated signal cascades. Gene expression of selected ECM proteins was analyzed. Statistical analyses included One-way and 2-way ANOVA and area under the curve analysis.Results:formation by the end of the culture period. The fibronectin and collagen type VI signal were consistent between the three tested donors, whereas the formation of type III collagen was only increased in one donor, but in several trials. Type I collagen formation was unchanged by IL-6 + sIL-6R stimulation. The gene expression of type I collagen was induced by IL-6 + sIL-6R. Western blot analysis validated trans-signaling by the IL-6+sIL-6R stimulation as expected.IL-6 + sIL-6R stimulation in combination with TGFβ decreased fibronectin levels compared to TGFβ alone but did not reach the level of unstimulated fibroblasts. The formation of collagen type IV was generally unchanged with IL-6 + sIL-6R + TGFβ compared to TGFβ alone. Collagen type I and III formation was more scattered in the signals when IL-6 + sIL-6R was in combination with TGFβ, as the biomarker level could be either decreased or increased compared to TGFβ alone. In two studies the type I collagen level was synergistic increased by IL-6 + sIL-6R + TGFβ, whereas another study found the level to be decreased compared to TGFβ alone. The gene expression of fibronectin and type I collagen was increased with TGFβ +IL-6+sIL-6R compared to TGFβ alone.Inhibition of IL-6R by TCZ in combination with IL-6 + sIL-6R did only decrease the fibronectin level with the lowest TCZ concentration (p=0.03). TCZ alone decreased the fibronectin level in a dose-dependent manner (One-way ANOVA p=0.0002).Conclusion:We investigated the fibrotic response of dermal fibroblasts to IL-6 + sIL-6R stimulation. IL-6 modulated the fibronectin level and modulated the collagen type III formation level in a somewhat dose-dependent manner. In combination with TGFβ, IL-6 decreased collagen type I and IV formation and fibronectin. However, in this study inhibition of IL-6R by TCZ did not change the fibrotic response of the dermal fibroblasts. This study indicated that IL-6 did not induce collagen formation in dermal fibroblasts, except type III collagen formation with high IL-6 concentration.Figure:Disclosure of Interests:Anne Sofie Siebuhr Employee of: Nordic Bioscience, Pernille Juhl Employee of: Nordic Bioscience, Morten Karsdal Shareholder of: Nordic Bioscience A/S., Employee of: Full time employee at Nordic Bioscience A/S., Anne-Christine Bay-Jensen Shareholder of: Nordic Bioscience A/S, Employee of: Full time employee at Nordic Bioscience A/S.


Sign in / Sign up

Export Citation Format

Share Document