scholarly journals The Aluminium Demand Risk of Terawatt Photovoltaics for Net Zero Emissions by 2050

2021 ◽  
Author(s):  
Alison Lennon ◽  
Marina Lunardi ◽  
Brett Hallam ◽  
Pablo Dias
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Emission Reduction ◽  
Electricity Grid ◽  
Net Zero ◽  
Additional Capacity ◽  
Reduce Emissions

Abstract The broad electrification scenario of recent photovoltaics roadmaps predicts that by 2050 we will need more than 60 TW of photovoltaics installed and be producing up to 4.5 TW of additional capacity each year if we are to rapidly reduce emissions to ‘net-zero’ and limit global warming to < 2°C. Given that after 2020, just over 700 GWp was installed, this represents an enormous manufacturing task which will create a demand for a number of metals. We show here that growth to 60 TW of photovoltaics could require up to 480 Mt of aluminium by 2050. A key concern for this aluminium demand is its large global warming potential. We predict the cumulative emissions arising from emission reduction scenarios in China and show that rapid decarbonisation of the electricity grid within 10 years will be required if they are to be kept below 1000 Mt CO2e by 2050.

scholarly journals Development of Foam One-Part Geopolymers with Enhanced Thermal Insulation Performance and Low Carbon Dioxide Emissions

2015 ◽  
Vol 1129 ◽  
pp. 565-572 ◽  
Author(s):  
Z. Abdollahnejad ◽  
F. Pacheco-Torgal ◽  
José Barroso de Aguiar
Keyword(s):  
Global Warming ◽  
Thermal Insulation ◽  
Global Warming Potential ◽  
Carbon Dioxide Emissions ◽  
Cost Effective ◽  
Building Energy Efficiency ◽  
Low Carbon ◽  
Insulation Materials ◽  
Aluminium Powder ◽  
Reduce Emissions

Buildings are responsible for more than 40% of the energy consumption and greenhouse gas emissions. Thus, increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials could constitute the most effective way of reducing heat losses in buildings by minimising heat energy needs. These materials have a thermal conductivity factor lower than 0.065 (W/m.K) while other insulation materials such as aerated concrete can go up to 0.11. Current insulation materials are associated with negative impacts in terms of toxicity. Polystyrene, for example contains anti-oxidant additives and ignition retardants. In addition, its production involves the generation of benzene and chlorofluorocarbons. Polyurethane is obtained from isocyanates, which are widely known for their tragic association with the Bhopal disaster. Besides current insulation materials releases toxic fumes when subjected to fire. This paper presents experimental results on one-part geopolymers. It also includes global warming potential assessment and cost analysis. The results show that only the use of aluminium powder allows the production mixtures with a high compressive strength however its high cost means they are commercially useless when facing the competition of commercial cellular concrete. The results also show that one-part geopolymer mixtures based on 26% Ordinary Portland Cement (OPC)+58.3% Fly Ash (FA)+8% Calcined Stuff (CS) +7.7% Calcium Hydroxide (CH) and 3.5% hydrogen peroxide constitute a promising cost efficient (67 euro/m3), thermal insulation solution for floor heating systems with low global warming potential of 443 KgCO2eq/m3.

scholarly journals Variation in Soil Properties Regulate Greenhouse Gas Fluxes and Global Warming Potential in Three Land Use Types on Tropical Peat

Atmosphere ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 465 ◽  
Author(s):  
Kiwamu Ishikura ◽  
Untung Darung ◽  
Takashi Inoue ◽  
Ryusuke Hatano
Keyword(s):  
Global Warming ◽  
Soil Moisture ◽  
Groundwater Level ◽  
Global Warming Potential ◽  
C:N Ratio ◽  
Co2 Flux ◽  
Nitrate Content ◽  
N2o Flux ◽  
Ch4 Flux ◽  
In The Beginning

This study investigated spatial factors controlling CO2, CH4, and N2O fluxes and compared global warming potential (GWP) among undrained forest (UDF), drained forest (DF), and drained burned land (DBL) on tropical peatland in Central Kalimantan, Indonesia. Sampling was performed once within two weeks in the beginning of dry season. CO2 flux was significantly promoted by lowering soil moisture and pH. The result suggests that oxidative peat decomposition was enhanced in drier position, and the decomposition acidify the peat soils. CH4 flux was significantly promoted by a rise in groundwater level, suggesting that methanogenesis was enhanced under anaerobic condition. N2O flux was promoted by increasing soil nitrate content in DF, suggesting that denitrification was promoted by substrate availability. On the other hand, N2O flux was promoted by lower soil C:N ratio and higher soil pH in DBL and UDF. CO2 flux was the highest in DF (241 mg C m−2 h−1) and was the lowest in DBL (94 mg C m−2 h−1), whereas CH4 flux was the highest in DBL (0.91 mg C m−2 h−1) and was the lowest in DF (0.01 mg C m−2 h−1), respectively. N2O flux was not significantly different among land uses. CO2 flux relatively contributed to 91–100% of GWP. In conclusion, it is necessary to decrease CO2 flux to mitigate GWP through a rise in groundwater level and soil moisture in the region.

scholarly journals Influence of technical and electrical equipment in life cycle assessments of buildings: case of a laboratory and research building

2021 ◽  
Author(s):  
E. Hoxha ◽  
D. Maierhofer ◽  
M.R.M Saade ◽  
A. Passer
Keyword(s):  
Global Warming ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Electrical Equipment ◽  
Primary Energy ◽  
Electronic Equipment ◽  
Detailed Result ◽  
Detailed Calculation ◽  
System Boundary ◽  
Operational Energy

Abstract Purpose A detailed assessment of the environmental impacts of the building requires a substantial amount of data that is time- and effort-consuming. However, limitation of the system boundary to certain materials and components can provide misleading impact calculation. In order to calculate the error gap between detailed and simplified assessments, the purpose of this article is to present a detailed calculation of the environmental impacts of the building by including in the system boundary, the technical, and electrical equipment. Method To that end, the environmental impacts of a laboratory and research building situated in Graz-Austria are assessed following the EN-15978 norm. Within the system boundaries of the study, the material and components of building fabric, technical, and electronic equipment for the building lifecycle stages of production, construction, replacement, operational energy and water, and end-of-life are considered. The input data regarding the quantity of materials is collected from the design and tendering documents, invoices, and from discussion with the head of the building’s construction site. Primary energy and global warming potential indicators are calculated on the basis of a functional unit of 1 m2 of energy reference area (ERA) per year, considering a reference building service life of 50 years. Results and discussion The primary energy indicator of the building is equal to 1698 MJ/m2ERA/year. The embodied impacts are found to be responsible for 28% of which 6.4% is due to technical and electronic equipment. Furthermore, the embodied impacts for the global warming potential, equal to 28.3 kg CO2e/m2ERA/year, are responsible for 73%. Together, technical and electrical equipment are the largest responsible aspects, accounting for 38% of the total impacts. Simplified and detailed result comparisons show a gap of 29% and 7.7% for global warming and primary energy indicators. These differences were from the embodied impacts and largely from the exclusion of electrical equipment from the study’s system boundary. Conclusions Technical and electrical equipment present a significant contribution to the overall environmental impacts of the building. Worthy of inclusion in the system boundary of the study, the environmental impacts of technical and electrical equipment must be calculated in detail or considered with a reliable ratio in the early design phase of the project. Further research is necessary to address the detailed impact calculation of the equipment and notably the minimization of their impacts.

scholarly journals Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

2021 ◽  
Author(s):  
Md.Musharof Hussain Khan ◽  
Ivan Deviatkin ◽  
Jouni Havukainen ◽  
Mika Horttanainen
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polymer Composite ◽  
Global Warming Potential ◽  
Consequential Life Cycle Assessment ◽  
Wood Polymer ◽  
Biogenic Carbon ◽  
Wood Polymer Composite

Abstract Purpose Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials. Methods Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet. Result and discussion In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet. Conclusions The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

scholarly journals Global Warming Potential of a New Waterjet-Based Recycling Process for Cathode Materials of Lithium-Ion Batteries

Batteries ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 29
Author(s):  
Leonard Kurz ◽  
Mojtaba Faryadras ◽  
Ines Klugius ◽  
Frederik Reichert ◽  
Andreas Scheibe ◽  
...  
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Waste Treatment ◽  
Raw Materials ◽  
Lithium Ion ◽  
Primary Data ◽  
Recycling Process ◽  
Use Of Resources ◽  
Mechanical Removal ◽  
Increasing Demand

Due to the increasing demand for battery electric vehicles (BEVs), the need for vehicle battery raw materials is increasing. The traction battery (TB) of an electric vehicle, usually a lithium-ion battery (LIB), represents the largest share of a BEV’s CO2 footprint. To reduce this carbon footprint sustainably and to keep the raw materials within a closed loop economy, suitable and efficient recycling processes are essential. In this life cycle assessment (LCA), the ecological performance of a waterjet-based direct recycling process with minimal use of resources and energy is evaluated; only the recycling process is considered, waste treatment and credits for by-products are not part of the analysis. Primary data from a performing recycling company were mainly used for the modelling. The study concludes that the recycling of 1 kg of TB is associated with a global warming potential (GWP) of 158 g CO2 equivalents (CO2e). Mechanical removal using a water jet was identified as the main driver of the recycling process, followed by an air purification system. Compared to conventional hydro- or pyrometallurgical processes, this waterjet-based recycling process could be attributed an 8 to 26 times lower GWP. With 10% and 20% reuse of recyclate in new cells, the GWP of TBs could be reduced by 4% and 8%, respectively. It has been shown that this recycling approach can be classified as environmentally friendly.

Global warming potential of biogenic methane

Tellus B ◽  
1999 ◽  
Vol 51 (3) ◽  
pp. 612-615 ◽  
Author(s):  
C. K. Varshney ◽  
Arun K. Attri
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Biogenic Methane
Sign in / Sign up

Export Citation Format

Share Document