scholarly journals Carboxyl Methyl Cellulose@Guar Gum@ CuO Nanoparticle as Effective Adsorbent for the Removal of Dye From Aqueous Solution

2021 ◽  
Author(s):  
Ali Hosseinian Naeini ◽  
mohammad Reza kalaee ◽  
Omid Moradi ◽  
Ramin Khajavi ◽  
Majid Abdouss
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Guar Gum ◽  
Methyl Cellulose ◽  
Second Order ◽  
Order Kinetic ◽  
Adsorbent Surface ◽  
Bet Analysis ◽  
Influential Parameters ◽  
Carboxy Methyl

Abstract In the present study, the study and fabrication of inorganic organic nanocomposites with Guar gam and Carboxy methyl cellulose biopolymer substrates. The synthesis nanocomposite of CMC/GG/CuO-3 is biodegradable and biocompatible, and also has a significant efficiency in removing malachite green (MG) dye from aqueous solution. Properties were evaluated by XRD, FTIR, SEM, EDX and BET analysis. Important and influential parameters on the adsorption process such as adsorbent amount, initial dye concentration, pH and contact time on the removal efficiency of contaminants from aqueous solutions were investigated. Maximum removal efficiency and adsorption capacity were 92.4% and 18.6 mg/g, respectively. In order to analyze the mechanism of experimental data, two First-order and Second-order kinetic models were used, which followed the second-order kinetics with R2=1. Also, the study of Freundlich and Langmuir isotherms showed that the isotherm model of Freundlich follows the R2=0.94, which indicates the non-uniformity of adsorption on the adsorbent surface.

Slip velocity and temperature jump of a non-Newtonian nanofluid, aqueous solution of carboxy-methyl cellulose/aluminum oxide nanoparticles, through a microtube

2019 ◽  
Vol 29 (5) ◽  
pp. 1606-1628 ◽  
Author(s):  
Marjan Goodarzi ◽  
Saeed Javid ◽  
Ali Sajadifar ◽  
Mehdi Nojoomizadeh ◽  
Seyed Hossein Motaharipour ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Aqueous Solution ◽  
Aluminum Oxide ◽  
Temperature Jump ◽  
Methyl Cellulose ◽  
Oxide Nanoparticles ◽  
Carboxy Methyl Cellulose ◽  
Aluminum Oxide Nanoparticles ◽  
Content Type ◽  
Carboxy Methyl

Purpose With respect to two new subjects, i.e. nanofluids and microchannels, in heat transfer systems and modern techniques used for building them, this paper aims to study on effect of using aluminum oxide nanoparticles in non-Newtonian fluid of aqueous solution of carboxy-methyl cellulose in microtube and through application of different slip coefficients to achieve various qualities on surface of microtube. Design/methodology/approach Simultaneously, the effect of presence of nanoparticles and phenomenon of slip and temperature jump has been explored in non-Newtonian nanofluid in this essay. The assumption of homogeneity of nanofluid and fixed temperature of wall in microtube has been used in modeling processes. Findings The results have been presented as diagrams of velocity, temperature and Nusselt Number and the investigations have indicated that addition of nanoparticles to the base fluid and increase in microtube slip coefficient might improve rate of heat transfer in microtube. Originality/value The flow of non-Newtonian nanofluid of aqueous solution of carboxy methyl cellulose-aluminum oxide has been determined in a microtube for the first time.

scholarly journals Kinetic and Thermodynamic Studies of Chromium (VI) Sorption by Pure and Carbonized Fluted Pumpkin waste biomass (Telfairia occidentalis Hook F.)

2012 ◽  
Vol 27 ◽  
pp. 11-18
Author(s):  
Timi Tarawou ◽  
Michael Horsfall
Keyword(s):  
Aqueous Solution ◽  
Rate Constants ◽  
Industrial Effluents ◽  
Second Order ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Fluted Pumpkin ◽  
Chromium Vi ◽  
Telfairia Occidentalis ◽  
Pseudo Second Order

The adsorption of chromium (VI) ions from aqueous solution was studied using pure and carbonized fluted pumpkin waste biomass (FPWB). The kinetic data shows a pseudo-first-order mechanism with rate constants of 1.26 × 10-2 and 1.933 × 10-2 mg g-1 min-1 for the pure and carbonized FPWB, respectively. While the pseudo-second-order mechanism has rate constants of 0.93 × 10-1 and 1.33 × 10-1 mg g-1 min-1 for the pure and carbonized waste biomass respectively. The pseudo-second order kinetic model was found to be more suitable for describing the experimental data based on the correlation coefficient values (R2) of 0.9975 and 0.9994 obtained for pure waste biomass (PWB) and carbonized waste biomass (CWB), respectively. The results obtained from this study show that PWB and CWB have very high removal capacity for chromium (VI) from aqueous solution over a range of reaction conditions. Thus, fluted pumpkin waste biomass (Telfairia occidentalis Hook F) is a potential sorbent for the treatment of industrial effluents containing chromium (VI) contaminant.DOI: http://dx.doi.org/10.3126/jncs.v27i1.6436 J. Nepal Chem. Soc., Vol. 27, 2011 11-18Uploaded date: 16 July, 2012

scholarly journals OPTIMIZATION OF LEVOFLOXACIN REMOVAL FROM AQUEOUS SOLUTION USING ELECTROCOAGULATION PROCESS BY RESPONSE SURFACE METHODOLOGY

2021 ◽  
Vol 52 (1) ◽  
pp. 204-217
Author(s):  
Mohammed & Mohammed-Ridha
Keyword(s):  
Aqueous Solution ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Correlation Coefficient ◽  
Iron Hydroxide ◽  
Second Order ◽  
Experimental Results ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
Good Agreement

This study was aimed to investigate the response surface methodology (RSM) to evaluate the effects of various experimental conditions on the removal of levofloxacin (LVX) from the aqueous solution by means of electrocoagulation (EC) technique with stainless steel electrodes. The EC process was achieved successfully with the efficiency of LVX removal of 90%. The results obtained from the regression analysis, showed that the data of experiential are better fitted to the polynomial model of second-order with the predicted correlation coefficient (pred. R2) of 0.723, adjusted correlation coefficient (Adj. R2) of 0.907 and correlation coefficient values (R2) of 0.952. This shows that the predicted models and experimental values are in good agreement. The results of the kinetic study showed that the second-order kinetic model was in good agreement with the experimental results and suggested that the mechanism of chemisorption controlled the LVX adsorption. The experimental results indicated that the adsorption of LVX on iron hydroxide flocs follows Sips isotherm with the value of the correlation coefficient (R2) of 0.937. Sips isotherm shows that both homogenous and heterogeneous adsorption can occur.

scholarly journals Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2295 ◽  
Author(s):  
Souad Rakass ◽  
Hicham Oudghiri Hassani ◽  
Mostafa Abboudi ◽  
Fethi Kooli ◽  
Ahmed Mohmoud ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Molybdenum Trioxide ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Removal Capacity ◽  
Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Removal of methylene blue from aqueous solution by Artist's Bracket fungi: kinetic and equilibrium studies

2016 ◽  
Vol 73 (11) ◽  
pp. 2832-2840 ◽  
Author(s):  
Daryush Naghipour ◽  
Kamran Taghavi ◽  
Mehrdad Moslemzadeh
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Removal Efficiency ◽  
Dye Adsorption ◽  
Surface Characteristic ◽  
Coefficient Of Determination ◽  
Order Kinetic ◽  
Operational Parameters ◽  
Equilibrium Studies ◽  
Increasing Temperature

In this study, adsorption of methylene blue (MB) dye onto Artist's Bracket (AB) fungi was investigated in aqueous solution. Fourier transform infrared and scanning electron microscopy were used to investigate surface characteristic of AB fungi. Influence of operational parameters such as pH, contact time, biosorbent dosage, dye concentration, inorganic salts and temperature was studied on dye removal efficiency. With the increase of pH from 3 to 9, removal efficiency increased from 74.0% to 90.4%. Also, it reduced from 99.8% to 81.8% with increasing initial MB concentration from 25 mg L−1 to 100 mg L−1, whereas it increased from 54.7% to 98.7% and from 98.5% to 99.9% with increasing biosorbent dosage from 0.5 g L−1 to 2 g L−1 and with increasing temperature from 25 °C to 50 °C, respectively. Isotherm studies have shown adsorption of MB dye over the AB fungi had a better coefficient of determination (R2) of 0.98 for Langmuir isotherm. In addition, the maximum monolayer adsorption capacity (qm) was 100 mg g−1. Also, the MB dye adsorption process followed pseudo-second-order kinetic. In general, AB fungi particles can be favorable for removal of MB dye from dye aqueous solution with natural pH and high temperature.

scholarly journals Cadmium(II) Removal from Aqueous Solution Using Microporous Eggshell: Kinetic and Equilibrium Studies

2018 ◽  
Vol 18 (2) ◽  
pp. 265 ◽  
Author(s):  
Behzad Shamsi Zadeh ◽  
Hossein Esmaeili ◽  
Rauf Foroutan
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
High Efficiency ◽  
Second Order ◽  
Order Kinetic ◽  
Mixing Rate ◽  
Equilibrium Studies ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Heavy metals are soluble in the environment and can be dangerous for many species. So, removal of heavy metals from the water and wastewater is an important process. In this study, an adsorbent made of eggshell powder was employed to remove cadmium ions from aqueous solution. A number of parameters were studied including pH of the aqueous solution, adsorbent dosage, contact time, the initial concentration of cadmium ion and mixing rate. The best efficiency for the removal of Cd(II) was obtained 96% using this adsorbent. The optimal parameters were ambient temperature of 30 °C, mixing rate of 200 rpm, pH of 9, an adsorbent dosage of 5 g/L and initial concentration of cadmium was 200 ppm. In order to study the kinetics of adsorbent, the pseudo-first-order and pseudo-second-order kinetic models and intra-particle diffusion model were applied. According to the pre-determined correlation coefficients (R2), the pseudo-second-order kinetic model showed a better correlation between the kinetic behaviors of the adsorbent. Furthermore, to study the equilibrium behavior of adsorbent, Langmuir and Freundlich models used and both models showed high efficiency in isotherm behavior of the adsorbent. So, this adsorbent can be used as a natural and cheap adsorbent.

Thermal Activation of Brazilian Smectite Clay (Primavera) and its Application for the Removal of Cadmium from Aqueous Solution

2020 ◽  
Vol 07 ◽  
Author(s):  
Marta Lígia Pereira da Silva ◽  
Tellys Lins Almeida Barbosa ◽  
Meiry Gláucia Freire Rodrigues
Keyword(s):  
Aqueous Solution ◽  
Kinetic Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
X Ray ◽  
Thermally Activated ◽  
Study Results ◽  
Water Cleaning ◽  
Pseudo Second Order

Background: Region-based solutions for water cleaning could be critical to tackle the water challenges faced in enhancing the in the future. Brazilian Primavera clay is cheap, abundant, and an untested material that has the potential to be used for water cleaning. Objective: the objective of the present work was to thermally activate and characterize the Brazilian clay and then determine the potential to remove Cd2+ from an aqueous solution. Methods: Primavera clay was thermally activated at 300 oC and characterized using X ray diffraction, X-ray Spectroscopy Energy Dispersive, and N2 adsorption. Sorption equilibrium was determined using the following experimental conditions: constant pH 4.5, 5 h, and 27 oC. Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherms models were applied in order to determine the efficiency of clay used as an adsorbent. Adsorption kinetics was analyzed using the pseudo-second-order kinetic model. Results: In this study, results revealed that even though the heat treatment did not cause profound alterations on the clay structure(smectite) and surface area (78 m2 /g), a pseudo-second-order kinetic constant of 0.5563 mg/g/min was found for the cadmium removal. Conclusion: The mathematical models of the Langmuir and Temkin showed a better fit to the experimental data. A high affinity between the cadmium and the thermally activated Primavera clay was found up to 88 % with removal efficiencies.

scholarly journals Fabrication of Amino Functionalized Magnetic Expanded Graphite Nanohybrids for Application in Removal of Ag(I) from Aqueous Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ying-Xia Ma ◽  
Yong-Xin Ruan ◽  
Dan Xing ◽  
Xue-Yan Du ◽  
Pei-Qing La
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Expanded Graphite ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
One Pot ◽  
X Ray ◽  
Pseudo Second Order

Ethylenediamine functionalized magnetic expanded graphite decorated with Fe3O4 nanoparticles (MEG-NH2) was fabricated by one-pot solvothermal method. The as-prepared MEG-NH2 nanohybrids were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and Zeta potential analyzer. The effects of Fe3O4 content in MEG-NH2 nanohybrids, pH, initial concentration, contact time, and dosage on adsorption properties of the MEG-NH2 nanohybrids for Ag(I) from aqueous solution were investigated by batch experiments. The pseudo-first-order and the pseudo-second-order kinetic models were utilized to study adsorption kinetics. The experimental data was also analyzed with Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models. The results show that Ag(I) was reduced to silver in the process of the adsorption by MEG-NH2 nanohybrids; the experimental data was better fitted to pseudo-second-order model and Langmuir isotherm model which revealed that the adsorption process was a chemical adsorption by the formation of silver on the surface of MEG-NH2 nanohybrids.

Sign in / Sign up

Export Citation Format

Share Document