scholarly journals Kinetic and Thermodynamic Studies of Chromium (VI) Sorption by Pure and Carbonized Fluted Pumpkin waste biomass (Telfairia occidentalis Hook F.)

2012 ◽  
Vol 27 ◽  
pp. 11-18
Author(s):  
Timi Tarawou ◽  
Michael Horsfall
Keyword(s):  
Aqueous Solution ◽  
Rate Constants ◽  
Industrial Effluents ◽  
Second Order ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Fluted Pumpkin ◽  
Chromium Vi ◽  
Telfairia Occidentalis ◽  
Pseudo Second Order

The adsorption of chromium (VI) ions from aqueous solution was studied using pure and carbonized fluted pumpkin waste biomass (FPWB). The kinetic data shows a pseudo-first-order mechanism with rate constants of 1.26 × 10-2 and 1.933 × 10-2 mg g-1 min-1 for the pure and carbonized FPWB, respectively. While the pseudo-second-order mechanism has rate constants of 0.93 × 10-1 and 1.33 × 10-1 mg g-1 min-1 for the pure and carbonized waste biomass respectively. The pseudo-second order kinetic model was found to be more suitable for describing the experimental data based on the correlation coefficient values (R2) of 0.9975 and 0.9994 obtained for pure waste biomass (PWB) and carbonized waste biomass (CWB), respectively. The results obtained from this study show that PWB and CWB have very high removal capacity for chromium (VI) from aqueous solution over a range of reaction conditions. Thus, fluted pumpkin waste biomass (Telfairia occidentalis Hook F) is a potential sorbent for the treatment of industrial effluents containing chromium (VI) contaminant.DOI: http://dx.doi.org/10.3126/jncs.v27i1.6436 J. Nepal Chem. Soc., Vol. 27, 2011 11-18Uploaded date: 16 July, 2012

Biosorption of Cr(VI) from Aqueous Solution by Aspergillus Niger

2011 ◽  
Vol 236-238 ◽  
pp. 155-158
Author(s):  
Li Fang Zhang ◽  
Shu Juan Dai ◽  
Ying Ying Chen
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Contact Time ◽  
Correlation Coefficients ◽  
Second Order ◽  
Order Kinetic ◽  
Chromium Vi ◽  
Biosorption Process ◽  
Initial Ph ◽  
Pseudo Second Order

In this study, Biosorption of hexavalent chromium ions from aqueous solution by using biomass ofAspergillus nigerwas investigated. Different parameters such as initial pH, biosorbent amount, contact time and temperature were explored. The biosorption of Cr (VI) ions was highly pH dependent and the optimum pH for biosorption of Cr (VI) ions was found to be 2.0. Biosorption capacity of Cr (VI) ions decreased with increased biosorbent dosage. The biosorption equilibrium was established in about 120min of contact time. Equilibrium uptake of Cr (VI) ions onto biomass increased from 12.57 mg/g at 20°C to 19.48 mg/g at 40 °C for 20mg/L Cr (VI) ions concentration. The biosorption process followed the pseudo-second order kinetic model and the correlation coefficients from the pseudo-second order model were all higher than 0.997 in all studied temperatures. These results suggest that the biomass ofAspergillus nigeris a promising biosorbent for removal of chromium (VI) ions from the wastewater.

Adsorption of Chromium (VI) from Aqueous Solution by Agricultural Waste Derived Activated Carbon

2013 ◽  
Vol 726-731 ◽  
pp. 2100-2106 ◽  
Author(s):  
Hua Zhang ◽  
Xue Hong Zhang ◽  
Yi Nian Zhu ◽  
Shou Rui Yuan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Agricultural Waste ◽  
Order Kinetic ◽  
Chromium Vi ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Grapefruit Peel ◽  
Pseudo Second Order ◽  
C 30

Activated carbon prepared from grapefruit peel, an agricultural solid waste by-product, has been used for the adsorption of Cr(VI) from aqueous solution. The effects of adsorbent dosage, pH and temperature on adsorption of Cr(VI) were investigated. The maximum adsorption yield was obtained at the initial pH of 3. The dynamical data fit very well with the pseudo-second-order kinetic model and the calculated adsorption capacities (23.98, 24.33 and 24.81 mg/g) were in good agreement with experiment results at 20°C, 30°C and 40 °C for the 100 mg/L Cr(VI) solution. The Freundlich model (R2 values were 0.9198-0.9871) fitted adsorption data better than the Langmuir model. The calculated parameters confirmed the favorable adsorption of Cr(VI) on the activated carbon prepared from grapefruit peel.

scholarly journals Cadmium(II) Removal from Aqueous Solution Using Microporous Eggshell: Kinetic and Equilibrium Studies

2018 ◽  
Vol 18 (2) ◽  
pp. 265 ◽  
Author(s):  
Behzad Shamsi Zadeh ◽  
Hossein Esmaeili ◽  
Rauf Foroutan
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
High Efficiency ◽  
Second Order ◽  
Order Kinetic ◽  
Mixing Rate ◽  
Equilibrium Studies ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Heavy metals are soluble in the environment and can be dangerous for many species. So, removal of heavy metals from the water and wastewater is an important process. In this study, an adsorbent made of eggshell powder was employed to remove cadmium ions from aqueous solution. A number of parameters were studied including pH of the aqueous solution, adsorbent dosage, contact time, the initial concentration of cadmium ion and mixing rate. The best efficiency for the removal of Cd(II) was obtained 96% using this adsorbent. The optimal parameters were ambient temperature of 30 °C, mixing rate of 200 rpm, pH of 9, an adsorbent dosage of 5 g/L and initial concentration of cadmium was 200 ppm. In order to study the kinetics of adsorbent, the pseudo-first-order and pseudo-second-order kinetic models and intra-particle diffusion model were applied. According to the pre-determined correlation coefficients (R2), the pseudo-second-order kinetic model showed a better correlation between the kinetic behaviors of the adsorbent. Furthermore, to study the equilibrium behavior of adsorbent, Langmuir and Freundlich models used and both models showed high efficiency in isotherm behavior of the adsorbent. So, this adsorbent can be used as a natural and cheap adsorbent.

Thermal Activation of Brazilian Smectite Clay (Primavera) and its Application for the Removal of Cadmium from Aqueous Solution

2020 ◽  
Vol 07 ◽  
Author(s):  
Marta Lígia Pereira da Silva ◽  
Tellys Lins Almeida Barbosa ◽  
Meiry Gláucia Freire Rodrigues
Keyword(s):  
Aqueous Solution ◽  
Kinetic Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
X Ray ◽  
Thermally Activated ◽  
Study Results ◽  
Water Cleaning ◽  
Pseudo Second Order

Background: Region-based solutions for water cleaning could be critical to tackle the water challenges faced in enhancing the in the future. Brazilian Primavera clay is cheap, abundant, and an untested material that has the potential to be used for water cleaning. Objective: the objective of the present work was to thermally activate and characterize the Brazilian clay and then determine the potential to remove Cd2+ from an aqueous solution. Methods: Primavera clay was thermally activated at 300 oC and characterized using X ray diffraction, X-ray Spectroscopy Energy Dispersive, and N2 adsorption. Sorption equilibrium was determined using the following experimental conditions: constant pH 4.5, 5 h, and 27 oC. Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherms models were applied in order to determine the efficiency of clay used as an adsorbent. Adsorption kinetics was analyzed using the pseudo-second-order kinetic model. Results: In this study, results revealed that even though the heat treatment did not cause profound alterations on the clay structure(smectite) and surface area (78 m2 /g), a pseudo-second-order kinetic constant of 0.5563 mg/g/min was found for the cadmium removal. Conclusion: The mathematical models of the Langmuir and Temkin showed a better fit to the experimental data. A high affinity between the cadmium and the thermally activated Primavera clay was found up to 88 % with removal efficiencies.

scholarly journals Application of immobilized waste brewery yeast cells for Cd2+ removal: Equilibrium and kinetics

2011 ◽  
Vol 76 (3) ◽  
pp. 363-373 ◽  
Author(s):  
Szende Tonk ◽  
Andrada Măicăneanu ◽  
Cerasella Indolean ◽  
Silvia Burca ◽  
Cornelia Majdik
Keyword(s):  
Correlation Coefficients ◽  
Alginate Beads ◽  
Second Order ◽  
Yeast Cells ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Biosorption Process ◽  
Equilibrium And Kinetics ◽  
Equilibrium Data ◽  
Pseudo Second Order

In this investigation, the removal of Cd2+ ions by a brewery waste biomass in immobilized (Ca-alginate beads) form was studied. The removal process was conducted at room temperature under batch conditions (magnetic stirring) using different initial cadmium concentrations. The equilibrium of biosorption was reached in 150 minutes for all employed initial concentrations. The maximum biosorption capacity was calculated to be 5.96 mg Cd2+ g-1 yeast for an initial Cd2+ concentration of 169 mg L-1. Langmuir and Freundlich adsorption isotherms were used to correlate the equilibrium adsorption data. Based on the correlation coefficients, it was concluded that the Langmuir isotherm is more suitable for describing the equilibrium data of cadmium biosorption. In addition, first and pseudo-second order kinetic models were applied to describe the biosorption process. The kinetic parameters for the pseudo-second order kinetics were determined.

scholarly journals Fabrication of Amino Functionalized Magnetic Expanded Graphite Nanohybrids for Application in Removal of Ag(I) from Aqueous Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ying-Xia Ma ◽  
Yong-Xin Ruan ◽  
Dan Xing ◽  
Xue-Yan Du ◽  
Pei-Qing La
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Expanded Graphite ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
One Pot ◽  
X Ray ◽  
Pseudo Second Order

Ethylenediamine functionalized magnetic expanded graphite decorated with Fe3O4 nanoparticles (MEG-NH2) was fabricated by one-pot solvothermal method. The as-prepared MEG-NH2 nanohybrids were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and Zeta potential analyzer. The effects of Fe3O4 content in MEG-NH2 nanohybrids, pH, initial concentration, contact time, and dosage on adsorption properties of the MEG-NH2 nanohybrids for Ag(I) from aqueous solution were investigated by batch experiments. The pseudo-first-order and the pseudo-second-order kinetic models were utilized to study adsorption kinetics. The experimental data was also analyzed with Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models. The results show that Ag(I) was reduced to silver in the process of the adsorption by MEG-NH2 nanohybrids; the experimental data was better fitted to pseudo-second-order model and Langmuir isotherm model which revealed that the adsorption process was a chemical adsorption by the formation of silver on the surface of MEG-NH2 nanohybrids.

scholarly journals Study on non-linear equilibrium, kinetics and thermodynamic of deltamethrin removal in aqueous solution using modified magnetic iron oxide nanoparticles

2017 ◽  
Vol 76 (4) ◽  
pp. 847-858 ◽  
Author(s):  
Bahareh Ghafari ◽  
Elham Moniri ◽  
Homayon Ahmad Panahi ◽  
Abdolreza Karbassi ◽  
Shaban Najafpour
Keyword(s):  
Aqueous Solution ◽  
Iron Oxide ◽  
Iron Oxide Nanoparticles ◽  
Second Order ◽  
Oxide Nanoparticles ◽  
Order Kinetic ◽  
Magnetic Iron Oxide Nanoparticles ◽  
Magnetic Iron Oxide ◽  
Non Linear ◽  
Pseudo Second Order

The purpose of modification of magnetic iron oxide nanoparticles is an eco-friendly, emerging and economical method for removing deltamethrin in the aqueous solution and wastewater effluents when compared with other adsorbent methods. Modified magnetic iron oxide nanoparticles were synthesized by co-precipitation and then coupled with 3-hydroxytyraminium chloride. The nano-sorbent was characterized by thermogravimetric analysis, elemental analysis, transmission electron microscopy, scanning electron microscope, Fourier transform infrared spectroscopy, zero point charge and surface area determination. Batch studies were conducted and adsorption equilibrium, kinetic and thermodynamic non-linear models were carried out. The resulting equilibrium data were tested with Langmuir and Freundlich non-linear isotherm models, and the results showed that the Langmuir isotherm fitted the data well. Kinetic studies were done with different initial deltamethrin concentrations, adsorbent dosage and temperature, and the data were assimilated with pseudo-first order, pseudo-second order and intra-particle diffusion kinetic equations, and it was found that the studied nano-sorbent processes followed the pseudo-second order kinetic equation. Thermodynamic analysis was also carried out to estimate the changes in free energy (ΔG0), enthalpy (ΔH0), and entropy (ΔS0). The thermodynamic parameters revealed that the adsorption of deltamethrin into the nano-sorbent was spontaneous, feasible and showed an endothermic process.

scholarly journals Phragmites karkaas a Biosorbent for the Removal of Mercury Metal Ions from Aqueous Solution: Effect of Modification

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Muhammad Hamid Raza ◽  
Aqsa Sadiq ◽  
Umar Farooq ◽  
Makshoof Athar ◽  
Tajamal Hussain ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Freundlich Isotherm ◽  
Agitation Speed ◽  
Second Order ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Phragmites Karka

Batch scale studies for the adsorption potential of novel biosorbentPhragmites karka(Trin), in its natural and treated forms, were performed for removal of mercury ions from aqueous solution. The study was carried out at different parameters to obtain optimum conditions of pH, biosorbent dose, agitation speed, time of contact, temperature, and initial metal ion concentration. To analyze the suitability of the process and maximum amount of metal uptake, Dubinin-Radushkevich (D-R) model, Freundlich isotherm, and Langmuir isotherm were applied. The values ofqmaxfor natural and treated biosorbents were found at 1.79 and 2.27 mg/g, respectively. The optimum values of contact time and agitation speed were found at 50 min and 150 rpm for natural biosorbent whereas 40 min and 100 rpm for treated biosorbent, respectively. The optimum biosorption capacities were observed at pH 4 and temperature 313 K for both naturalP. karkaand treatedP. karka.RLvalues indicate that comparatively treatedP. karkawas more feasible for mercury adsorption compared to naturalP. karka. Both pseudo-first-order and pseudo-second-order kinetic models were applied and it was found that data fit best to the pseudo-second-order kinetic model. Thermodynamic studies indicate that adsorption process was spontaneous, feasible, and endothermic.

Study of the kinetics and the adsorption isotherm of cadmium(II) from aqueous solution using green algae (Ulva lactuca) biomass

2015 ◽  
Vol 72 (9) ◽  
pp. 1505-1515 ◽  
Author(s):  
H. Asnaoui ◽  
A. Laaziri ◽  
M. Khalis
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Ulva Lactuca ◽  
Order Kinetic ◽  
Solution Ph ◽  
Algae Biomass ◽  
Pseudo Second Order

Batch experiments were conducted to study the adsorption of hazardous cadmium onto low-cost algae biomass in aqueous solution with respect to concentration of adsorbate, adsorbent dosage, contact time, solution pH and temperature. Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The activation energy of adsorption was also evaluated for the adsorption of cadmium onto Ulva lactuca biomass. Experimental data were tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of Cd(II) followed well pseudo-second-order kinetics. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by Ulva lactuca biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The biosorption capacity of Ulva lactuca biomass for cadmium was found to be 3.02 mg/g at pH 5.60 min equilibrium time and 20 °C. The mean free energy which was calculated was 6.24 kJ/mol for Cd(II) biosorption, which shows that the adsorption is physical. The calculated thermodynamic parameters (ΔG0, ΔH0 and ΔS0) showed that the biosorption of Cd(II) onto Ulva lactuca biomass was feasible, spontaneous and exothermic under examined conditions. The results indicate that algae Ulva lactuca could be employed as a low-cost material for the removal of metal ions from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document