scholarly journals Multiband and Low-Profile Frequency Reconfigurable Microstrip Patch Antenna Design Using Single PIN diode for WiFi/GPS applications

2021 ◽  
Author(s):  
Shobhit K. Patel ◽  
sana ben khalifa ◽  
saleh chebaane ◽  
Sunil Lavadiya ◽  
Yagnesh Parmar ◽  
...  
Keyword(s):  
Cost Reduction ◽  
Pin Diode ◽  
The Novel ◽  
Performance Parameters ◽  
Microstrip Patch ◽  
Low Profile ◽  
Frequency Tunability ◽  
Reflectance Coefficient ◽  
The Cost ◽  
Total Gain

Abstract The novel and simple approach for achieving frequency tunability is presented. The frequency tunability is achieved using a single PIN diode. PIN diode located on the upper side of the structure to reduces the biasing complexity. The superstrate structure along with the corner truncation helps for enhancing the performance parameters, as well the location of feed and slot of the patch is varied for locating best performing points. This design provides the multiband frequency tunability behavior with the maximum frequency tunability of 100 MHz. The design provides the minimum reflectance coefficient of -22.56 dB, the directivity of 6.98 dB, the total gain of 3.683 dB, normalized directivity of 88 0 using the low profile (FR-4) substrate which helps for the cost reduction and mass production. The simulation is carried out using the HFSS tool. The fabrication of the proposed design is also presented. This design suitable for Wifi, GPS, and many more wireless communication applications.

Implementasi Analisis Proses Bisnis Sebagai Upaya Pengurangan Biaya

2019 ◽  
Vol 10 (1) ◽  
pp. 1-27
Author(s):  
Aniek Wijayanti
Keyword(s):  
Business Process ◽  
Cost Reduction ◽  
Process Analysis ◽  
Value Added ◽  
Added Value ◽  
Natural Material ◽  
Management Activity ◽  
Procurement Process ◽  
Material Procurement ◽  
The Cost

Business Process Analysis can be used to eliminate or reduce a waste cost caused by non value added activities that exist in a process. This research aims at evaluating activities carried out in the natural material procurement process in the PT XYZ, calculating the effectiveness of the process cycle, finding a way to improve the process management, and calculating the cost reduction that can achieved by activity management. A case study was the approach of this research. The researcher obtained research data throughout deep interviews with the staff who directly involved in the process, observation, and documentation of natural material procurement. The result of this study show that the effectiveness of the process cycle of natural material procurement in the factory reached as much as 87,1% for the sand material and 72% for the crushed stone. This indicates that the process still carry activities with no added value and still contain ineffective costs. Through the Business Process Mechanism, these non value added activities can be managed so that the process cycle becomes more efficient and cost effectiveness is achieved. The result of the effective cycle calculation after the management activities implementation is 100%. This means that the cost of natural material procurement process has become effective. The result of calculation of the estimated cost reduction as a result of management activity is as much as Rp249.026.635,90 per year.

ANALISIS PENGARUH BIAYA OPERASIONAL PADA PERUSAHAAN PENERBANGAN NASIONAL

2017 ◽  
Vol 1 (2) ◽  
pp. 81-107
Author(s):  
Dheny Biantara
Keyword(s):  
Value Chain ◽  
Cost Efficiency ◽  
Cost Reduction ◽  
Cost Leadership ◽  
Oil Pricing ◽  
The Cost ◽  
Operation Flexibility ◽  
Airline Maintenance

Summarized Indonesian airline executive views on the reason for the cost problem in mayor airline andon the potential areas and measures of cost reduction in airline operation. Present an introductionsurvey where 3 executives from 3 Indonesian airlines were respondent. In the executive opinion the costproblem in mayor Indonesian airline is primarily due to fuel and oil pricing and money currency. Of thevarious function in airline maintenance was seen as least cost efficiency, whereas flight operation wasseen as an area with most potential for cost reduction. Indonesian airline had made route and fleetchanges after the beginning of 2011 to reduce cost, concludes from the analisys result havingprivatization would be an important step towards more efficient airline operation. Flexibility fromIndonesian airline regulatory would be very much welcome and the value chain concept to improveIndonesian airline having competitive adventage and cost leadership differentiation.

Insights into Transdermal Drug Delivery: Approaches for Redressal of a Burgeoning Issue of Osteoporosis

2020 ◽  
Vol 20 (10) ◽  
pp. 1682-1695
Author(s):  
Foziyah Zakir ◽  
Kanchan Kohli ◽  
Farhan J. Ahmad ◽  
Zeenat Iqbal ◽  
Adil Ahmad
Keyword(s):  
Drug Delivery ◽  
Transdermal Delivery ◽  
Oral Delivery ◽  
Calcium Absorption ◽  
Early Stage ◽  
Osteoporotic Fractures ◽  
The Novel ◽  
Systemic Delivery ◽  
Primary Focus ◽  
The Cost

Osteoporosis is a progressive bone disease that remains unnoticed until a fracture occurs. It is more predominant in the older age population, particularly in females due to reduced estrogen levels and ultimately limited calcium absorption. The cost burden of treating osteoporotic fractures is too high, therefore, primary focus should be treatment at an early stage. Most of the marketed drugs are available as oral delivery dosage forms. The complications, as well as patient non-compliance, limit the use of oral therapy for prolonged drug delivery. Transdermal delivery systems seem to be a promising approach for the delivery of anti-osteoporotic active moieties. One of the confronting barriers is the passage of drugs through the SC layers followed by penetration to deeper dermal layers. The review focuses on how anti-osteoporotic drugs can be molded through different approaches so that they can be exploited for the skin to systemic delivery. Insights into the various challenges in transdermal delivery and how the novel delivery system can be used to overcome these have also been detailed.

Design and Verification of Novel Low-Profile Miniaturized Pattern and Frequency Tunable Microstrip Patch Antenna Using Two PIN Diodes

2021 ◽  
Author(s):  
Sunil P. Lavadiya ◽  
Vishal Sorathiya ◽  
Sunny Kanzariya ◽  
Bhavik Chavda ◽  
Osama S. Faragallah ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Pin Diodes ◽  
Microstrip Patch ◽  
Low Profile ◽  
Frequency Tunable

Reconfigurable Frequency Textile Antenna with Circular Polarization Using Slotted Technique

2015 ◽  
Vol 781 ◽  
pp. 81-84 ◽  
Author(s):  
Shakhirul Mat Salleh ◽  
Muzammil Jusoh ◽  
Abdul Hafiizh Ismail ◽  
Muhammad Ramlee Kamarudin ◽  
Mohamad Imran Ahmad ◽  
...  
Keyword(s):  
Circular Polarization ◽  
Axial Ratio ◽  
Dual Band ◽  
Operating Frequency ◽  
Pin Diode ◽  
Switching Element ◽  
Band Frequency ◽  
Microstrip Patch ◽  
Textile Antenna

This paper presents a reconfigurable frequency microstrip patch textile antenna using slotted technique. The switchable frequency is achieved by implementing three PIN diode switches at the slotted ground of the antenna. It is discovered that the switching element is capable to configure the frequency at six different states of operating frequencies between 1.575 GHz until 2.45 GHz. With certain switches configuration, the antenna is proficient to produce a dual-band frequency of band 1; 1.575 GHz and 2.45 GHz and band 2; 1.588 GHz and 2.36 GHz. Besides, the antenna has successfully perform an axial ratio of less than <3 dB at the GPS operating frequency of 1.575 GHz. A shieldit super is used for the antenna radiator and felt fabric as the antenna substrate. The design and simulated result shows that the presented antenna is potential to be implemented in GPS and Wi-Fi applications.

Recent advances in the technologies of connection for panel structures: Design and cost analysis of different solutions with X-shaped dissipative connectors

2016 ◽  
Vol 20 (3) ◽  
pp. 299-315
Author(s):  
Massimo Latour
Keyword(s):  
Finite Element ◽  
Cost Reduction ◽  
Design Criterion ◽  
Classical Solutions ◽  
Finite Element Analyses ◽  
Seismic Damper ◽  
Classical Systems ◽  
Cyclic Behaviour ◽  
Energy Dissipation Capacity ◽  
The Cost

In this work, a recently patented seismic damper to be applied to structures composed by systems of panels is presented. In particular, the article is devoted to characterize the behaviour of the proposed connector by means of an experimental and numerical analysis and to provide some information about the cost of the elements needed to realize the damper, accounting for the manufacturing process. The experimental analysis has regarded five specimens tested under different loading conditions, and it has been used as a term of comparison with the classical systems of connection currently employed in these structures. Afterwards, in the article, a design criterion able to control the capacity and ductility of the device by simply varying the shape of the damper is presented and its accuracy is evaluated by performing finite element analyses. The results of the experimental and finite element analyses are very promising in terms of cyclic behaviour and energy dissipation capacity and reveal that the design of the element can be accurately controlled by means of the proposed approach. Furthermore, the cost estimate has revealed that the proposed damper is also cheaper than the classical solutions with a cost reduction of about 40%.

Sign in / Sign up

Export Citation Format

Share Document