Summary of Transonic Compressor Research

2002 ◽  
Author(s):  
William W. Copenhaver
Keyword(s):  
Transonic Compressor

scholarly journals Aerodynamic Inverse Design of Transonic Compressor Cascades with Stabilizing Elastic Surface Algorithm

2021 ◽  
Vol 11 (11) ◽  
pp. 4845
Author(s):  
Mohammad Hossein Noorsalehi ◽  
Mahdi Nili-Ahmadabadi ◽  
Seyed Hossein Nasrazadani ◽  
Kyung Chun Kim
Keyword(s):  
Design Method ◽  
Inverse Design ◽  
Normal Shock ◽  
Compressor Cascade ◽  
Elastic Surface ◽  
Transonic Compressor ◽  
Pressure Distributions ◽  
The Difference ◽  
Inverse Design Method ◽  
Transonic Cascade

The upgraded elastic surface algorithm (UESA) is a physical inverse design method that was recently developed for a compressor cascade with double-circular-arc blades. In this method, the blade walls are modeled as elastic Timoshenko beams that smoothly deform because of the difference between the target and current pressure distributions. Nevertheless, the UESA is completely unstable for a compressor cascade with an intense normal shock, which causes a divergence due to the high pressure difference near the shock and the displacement of shock during the geometry corrections. In this study, the UESA was stabilized for the inverse design of a compressor cascade with normal shock, with no geometrical filtration. In the new version of this method, a distribution for the elastic modulus along the Timoshenko beam was chosen to increase its stiffness near the normal shock and to control the high deformations and oscillations in this region. Furthermore, to prevent surface oscillations, nodes need to be constrained to move perpendicularly to the chord line. With these modifications, the instability and oscillation were removed through the shape modification process. Two design cases were examined to evaluate the method for a transonic cascade with normal shock. The method was also capable of finding a physical pressure distribution that was nearest to the target one.

scholarly journals Effects of Tip Leakage Flow on the Aerodynamic Performance and Stability of an Axial-Flow Transonic Compressor Stage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4168
Author(s):  
Botao Zhang ◽  
Xiaochen Mao ◽  
Xiaoxiong Wu ◽  
Bo Liu
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Transonic Compressor

To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow intensity is increased, the shock wave position is moved backward, and the interaction between the tip leakage vortex and shock wave is intensified, while that between the boundary layer and shock wave is weakened. Most of all, the stall mechanisms of the compressors with varying rotor tip clearances are different. The clearance leakage flow is the main cause of the rotating stall under large rotor tip clearance. However, the stall form for the compressor with half of the designed tip clearance is caused by the joint action of the rotor tip stall caused by the leakage flow spillage at the blade leading edge and the whole blade span stall caused by the separation of the boundary layer of the rotor and the stator passage. Within the investigated varied range, when the rotor tip clearance size is half of the design, the compressor performance is improved best, and the peak efficiency and stall margin are increased by 0.2% and 3.5%, respectively.

An Entropy Based Evaluation of Efficiency of a Transonic Compressor Rotor With Water Injection

2008 ◽  
Author(s):  
Istvan Szabo ◽  
Mark G. Turner
Keyword(s):  
Viscous Dissipation ◽  
Entropy Generation ◽  
Dissipation Function ◽  
Entropy Generation Rate ◽  
Thermodynamic Efficiency ◽  
Compression Process ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Wet Compression ◽  
Isentropic Efficiency

Defining the thermodynamic efficiency of the wet compression process in a compressor is not trivial, since the flow in this case has multiple phases present which interact with each other. In this paper, an approach is presented that calculates the overall entropy creation and thus the isentropic efficiency of a wet compression process in a transonic compressor rotor. The viscous dissipation function is calculated everywhere in the domain in the post-processing phase of the CFD simulation and integrated to the wall, with special treatment in the near-wall regions where high rates of entropy generation occur. The isentropic efficiency of the wet compression is then determined from the entropy generation rate. Analytical integration of wall functions and numerical integration of the viscous dissipation function allows for reasonable results even with relatively coarse grids and can be applied for single-phase flows. The methodology presented is also useful to quantify the efficiency of thermodynamic processes in devices that introduce streams into the flow path, such as cooled turbines and compressors with flow control.

Experimental Investigation During Stall and Surge in a Transonic Fan Stage and Rotor-Only Configuration

2006 ◽  
Author(s):  
A. J. Gannon ◽  
G. V. Hobson ◽  
R. P. Shreeve ◽  
I. J. Villescas
Keyword(s):  
High Speed ◽  
Fast Response ◽  
Pressure Measurements ◽  
Post Processing ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
The Difference ◽  
Data Signal ◽  
Transonic Fan ◽  
Casing Pressure

High-speed pressure measurements of a transonic compressor rotor-stator stage and rotor-only configuration during stall and surge are presented. Rotational speed data showed the difference between the rotor-only case and rotor-stator stage. The rotor-only case stalled and remained stalled until the control throttle was opened. In the rotor-stator stage the compressor surged entering a cyclical stalling and then un-stalling pattern. An array of pressure probes was mounted in the case wall over the rotor for both configurations of the machine. The fast response probes were sampled at 196 608 Hz as the rotor was driven into stall. Inspection of the raw data signal allowed the size and speed of the stall cell during its growth to be investigated. Post-processing of the simultaneous signals of the casing pressure showed the development of the stall cell from the point of inception and allowed the structure of the stall cell to be viewed.

Internal flow measurement in transonic compressor by PIV technique

2001 ◽  
Author(s):  
Tongqing Wang ◽  
Huaiyu Wu ◽  
Yin Liu
Keyword(s):  
Flow Measurement ◽  
Internal Flow ◽  
Transonic Compressor ◽  
Piv Technique

Pre-Deformation Method for Manufactured Compressor Blade Based on Load Incremental Approach

2020 ◽  
Vol 37 (3) ◽  
pp. 259-265
Author(s):  
Kang Da ◽  
Wang Yongliang ◽  
Zhong Jingjun ◽  
Liu Zihao
Keyword(s):  
Compressor Blade ◽  
Aerodynamic Load ◽  
Deformation Method ◽  
Transonic Compressor ◽  
Incremental Approach ◽  
Compressor Rotor ◽  
Centrifugal Load ◽  
Blade Shape ◽  
Stationary Shape ◽  
Deformation Procedure

AbstractThe blade deformation caused by aerodynamic and centrifugal loads during operating makes blade configurations different from their stationary shape. Based on the load incremental approach, a novel pre-deformation method for cold blade shape is provided in order to compensate blade deformation under running. Effect of nonlinear blade stiffness is considered by updating stiffness matrix in response to the variation of blade configuration when calculating deformations. The pre-deformation procedure is iterated till a converged cold blade shape is obtained. The proposed pre-deformation method is applied to a transonic compressor rotor. Effect of load conditions on blade pre-deformation is also analyzed. The results show that the pre-deformation method is easy to implement with fast convergence speed. Neither the aerodynamic load nor centrifugal load can be neglected in blade pre-deformation.

Effects of Inlet Distortion on the Flow Field in a Transonic Compressor Rotor

1996 ◽  
Author(s):  
Chunill Hah ◽  
Douglas C. Rabe ◽  
Thomas J. Sullivan ◽  
Aspi R. Wadia
Keyword(s):  
Boundary Layer ◽  
Flow Field ◽  
Viscous Flow ◽  
Total Pressure ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Aerodynamic Loss ◽  
Transonic Compressor ◽  
Inlet Distortion ◽  
Compressor Rotor

The effects of circumferential distortions in inlet total pressure on the flow field in a low-aspect-ratio, high-speed, high-pressure-ratio, transonic compressor rotor are investigated in this paper. The flow field was studied experimentally and numerically with and without inlet total pressure distortion. Total pressure distortion was created by screens mounted upstream from the rotor inlet. Circumferential distortions of 8 periods per revolution were investigated at two different rotor speeds. The unsteady blade surface pressures were measured with miniature pressure transducers mounted in the blade. The flow fields with and without inlet total pressure distortion were analyzed numerically by solving steady and unsteady forms of the Reynolds-averaged Navier-Stokes equations. Steady three-dimensional viscous flow calculations were performed for the flow without inlet distortion while unsteady three-dimensional viscous flow calculations were used for the flow with inlet distortion. For the time-accurate calculation, circumferential and radial variations of the inlet total pressure were used as a time-dependent inflow boundary condition. A second-order implicit scheme was used for the time integration. The experimental measurements and the numerical analysis are highly complementary for this study because of the extreme complexity of the flow field. The current investigation shows that inlet flow distortions travel through the rotor blade passage and are convected into the following stator. At a high rotor speed where the flow is transonic, the passage shock was found to oscillate by as much as 20% of the blade chord, and very strong interactions between the unsteady passage shock and the blade boundary layer were observed. This interaction increases the effective blockage of the passage, resulting in an increased aerodynamic loss and a reduced stall margin. The strong interaction between the passage shock and the blade boundary layer increases the peak aerodynamic loss by about one percent.

Sign in / Sign up

Export Citation Format

Share Document