scholarly journals Photoperiod Affects Growth and Flowering of Lysimachia clethroides Duby

HortScience ◽  
2000 ◽  
Vol 35 (4) ◽  
pp. 596-599
Author(s):  
Pamela M. Lewis ◽  
Allan M. Armitage ◽  
James M. Garner
Keyword(s):  
Plant Height ◽  
Flowering Plants ◽  
Cut Flower ◽  
Bud Formation ◽  
Affected Plant ◽  
Lysimachia Clethroides ◽  
Short Days

Gooseneck loosestrife (Lysimachia clethroides Duby) rhizomes were cooled for 10 weeks at 4 ± 1 °C prior to greenhouse forcing in continuous long days (LD); continuous short days (SD); 4, 6, 8, or 10 weeks of SD followed by LD until anthesis; and 4, 6, 8, or 10 weeks of LD followed by SD. None of the plants grown in continuous SD flowered, and fewer than 30% of plants flowered when grown in 4, 6, or 8 weeks of LD followed by SD for 21 to 25 weeks. At least 10 weeks of LD prior to SD were required to obtain 70% flowering. Plants receiving continuous LD or 4, 6, or 8 weeks of SD followed by LD flowered in the highest percentages (85% to 90%), but only 10% of plants receiving 10 weeks of SD followed by LD flowered. The number of greenhouse days required for visible bud formation and anthesis increased linearly as initial SD exposure increased, but the number of racemes produced by flowering plants was not affected. Plant height was greatest in continuous LD, and decreased linearly as initial SD exposure prior to LD increased from 0 to 10 weeks. Plants grown in continuous SD remained vegetative rosettes throughout the experiment, and their height increased linearly as initial LD prior to SD increased from 0 (continuous SD) to 10 weeks. These results demonstrate that supplemental LD lighting can promote growth and flowering in this species and that lighting can be discontinued 3 weeks before harvest of cut flower crops.

Vernalization Accelerates Flowering of Lysimachia clethroides Duby

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 508b-508
Author(s):  
Pamela M. Lewis ◽  
Alan M. Armitage ◽  
Jim M. Garner
Keyword(s):  
Stem Diameter ◽  
Stem Length ◽  
Cut Flower ◽  
Bud Formation ◽  
Flower Production ◽  
Sphagnum Peat ◽  
Potting Media ◽  
Lysimachia Clethroides ◽  
Shoot Emergence

The effect of vernalization method and duration on off-season cut flower production of Lysimachia clethroides Duby was examined. Rhizomes harvested in October were cooled for 0, 4, 6, 8, 10 or 12 weeks at 4 ± 1 °C in crates with unmilled sphagnum peat or in 3.75-L pots with potting media prior to forcing in a warm greenhouse. After 6 or more weeks of cooling, shoots emerged from crate-cooled rhizomes in higher percentages than from pot-cooled rhizomes. However, only the duration of cooling, not the method, affected the rate of shoot emergence, visible bud formation and anthesis of the first bud in the raceme. As cooling increased from 0 to 12 weeks, the greenhouse days required for shoot emergence, visible bud formation and anthesis decreased linearly. The number of flowering flushes and flowering stems varied quadratically with cooling duration, and the highest yields occurred when rhizomes received between 4 and 10 weeks of cooling. As the number of successive flowering flushes increased, the stem length increased linearly while the stem diameter decreased linearly. High numbers of flowers were produced rapidly after 10 weeks of cooling.

scholarly journals Cooling Accelerates Flowering of Lysimachia clethroides Duby

HortScience ◽  
1999 ◽  
Vol 34 (2) ◽  
pp. 239-241 ◽  
Author(s):  
Pamela M. Lewis ◽  
Allan M. Armitage ◽  
James M. Garner
Keyword(s):  
Stem Diameter ◽  
Stem Length ◽  
Peat Moss ◽  
Cut Flower ◽  
Bud Formation ◽  
Flower Production ◽  
Cooling Method ◽  
Sphagnum Peat Moss ◽  
Lysimachia Clethroides ◽  
Shoot Emergence

The effect of cooling method and duration on off-season cut flower production of Lysimachia clethroides Duby was examined. Rhizomes harvested in October were cooled for 0, 4, 6, 8, 10, or 12 weeks at 4 ± 1 °C in crates with unmilled sphagnum peat moss or in 3.75-L pots filled with a commercial soilless medium prior to forcing in a warm greenhouse. After 6 or more weeks of cooling, shoots emerged from crates in higher percentages than from pots. However, only the duration of cooling, not the method, affected the rate of shoot emergence, visible bud formation, and anthesis of the first bud in the raceme. As cooling increased from 0 to 12 weeks, the greenhouse days required for shoot emergence, visible bud formation, and anthesis decreased linearly. The number of flowering flushes and flowering stems produced per plant varied quadratically with cooling duration, and the highest yields occurred when rhizomes received between 4 and 10 weeks of cooling. High numbers of flowers were produced rapidly after 10 weeks of cooling. As the number of successive flowering flushes increased, the stem length increased linearly while the stem diameter decreased linearly.

DIFFERENTIAL EFFECT OF SALINITY ON GROWTH, NUTRIENT CONCENTRATION AND CHLOROPHYLL IN SUGARCANE VARIETIES MEX 69-290 AND CP 72-2086

Agrociencia ◽  
2021 ◽  
Vol 55 (7) ◽  
pp. 597-610
Author(s):  
Odón Castañeda Castro ◽  
Miriam Cristina Pastelín Solano ◽  
Libia Iris Trejo Téllez ◽  
Eduardo Ariel Solano Pastelín ◽  
Fernando Carlos Gómez Merino
Keyword(s):  
Plant Height ◽  
Plant Performance ◽  
Saccharum Spp ◽  
Sugarcane Varieties ◽  
Randomized Design ◽  
Affected Plant ◽  
Nacl Concentration ◽  
Irrigation Solution ◽  
Completely Randomized Design ◽  
Better Than

Sugarcane (Saccharum spp. hybrids) is moderately sensitive to salinity and the effects on plant performance vary according to stress level and genotype. This study aimed to evaluate the effect of salt stress induced by application of different NaCl levels in the irrigation solution on plant height, indirect index of chlorophylls (SPAD), and macronutrients concentration (N, P, K, Ca, Mg and S) and Na in leaves of two sugarcane varieties: CP 72-2086 and Mex 69-290. The experiment was set in a completely randomized design with a 2×5 factorial arrangement. The study factors were sugarcane variety (CP 72-2086 and Mex 69-290) and NaCl concentration (0.0, 71.8, 143.6, 215.4 and  282.7 mM NaCl). Salinity as a single factor negatively affected plant height, SPAD units and N and P concentration in leaves; Ca concentrations increased, while K, Mg and S remained unaffected by the tested NaCl levels. Mex 69-290 grew higher and concentrated greater levels of N and K. Interactions of factors showed that salinity reduced growth in both varieties, but this reduction was more pronounced in CP 72-2086. SPAD units were also significantly reduced by salinity in both varieties. Concentrations of N and P in leaves decreased in both varieties in response to NaCl, while those of K and Ca increased in Mex 69-290. Concentration of Na was higher in Mex 69-290 which exhibited better performance than CP 72-2086. Sodium concentrations in leaves increased in direct relation to the tested NaCl concentrations. Mex 69-290 reached higher concentrations of Na in leave tissues but displayed better health than CP 72-2086. Thus, the variety Mex 69-290 showed more efficient Na-tolerance mechanisms related to Ca and K concentrations, and an indirect chlorophyll index better than CP 72-2086.

Triticale (X Triticosecale Wittmack) Response to Herbicides

1994 ◽  
Vol 8 (1) ◽  
pp. 119-123 ◽  
Author(s):  
Alan C. York ◽  
Stewart M. Turner ◽  
Ronald E. Jarrett
Keyword(s):  
Plant Height ◽  
Kernel Weight ◽  
Grain Weight ◽  
Test Weight ◽  
X Triticosecale ◽  
Affected Plant ◽  
Yield Test ◽  
Triticosecale Wittmack ◽  
X Triticosecale Wittmack

The response of ‘Florico,’ ‘Victoria,’ and 'Stan II’ triticale to 2,4-D, dicamba, 2,4-D plus dicamba, diclofop, and thifensulfuron plus tribenuron applied POST during the tillering stage was examined. At rates twice those recommended for application to wheat, Victoria and Stan II were not injured, and injury to Florico was less than 10%. None of the herbicides or combinations adversely affected plant height at maturity, tiller or spike production, grain weight/spike, kernel weight, kernels/spike, yield, or test weight of any cultivar. Cultivars varied in tiller production, height, yield, test weight, kernel weight, and kernels/spike.

scholarly journals Reuse of Treated Municipal Wastewater from Constructed Wetlands for Cut Flowers Irrigation in Aeroponic Cultivation

2020 ◽  
Vol 24 ◽  
Author(s):  
Ismael Leonardo Vera-Puerto ◽  
Jorge Leonardo Olave-Vera ◽  
Sussy Tapia ◽  
Wladimir Antonio Chávez ◽  
Carlos Arias
Keyword(s):  
Constructed Wetlands ◽  
Municipal Wastewater ◽  
Cut Flower ◽  
Cut Flowers ◽  
Cultivation System ◽  
Cultivation Systems ◽  
Arid Conditions ◽  
Affected Plant ◽  
Treated Municipal Wastewater

The aim of this work is to evaluate the reuse of municipal wastewaters treated through subsurface constructed wetlands (SS-CWs) as irrigation water in cut flower aeroponic cultivation under arid conditions. For this purpose, two experimental aeroponic cultivation systems were installed with the cut flower Lilium ‘Tresor’ planted and irrigated with SS-CWs treated water. The results showed that the quality of the SS-CWs wastewater has to be improved to be used in irrigation. Despite that, Lilium ‘Tresor’ grew under arid conditions with normal stem diameters and number of flowers but with heights under 0.65 m, which would restrict their commercialization to local markets. Water electrical conductivity (> 2300 µs/cm) and luminosity (> 120 klux) were factors that affected plant height. When compared to other cultivation systems, the aeroponic cultivation system used between 10 % and 20 % of the amount of water needed to produce Lilium ‘Tresor.’ Thus, this work showed the feasibility to produce cut flowers using an aeroponic cultivation system under arid conditions and irrigated with SS-CWs effluents. Likewise, it was detected that improvements to water quality and luminosity must be made for industrial scaling.

scholarly journals Optimasi Dosis Pupuk Kandang Ayam dan NPK pada Budidaya Kubis Bunga (Brassica oleracea var. Botrytis L.)

2021 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Irpan Gunawan ◽  
Atak Tauhid ◽  
Isna Tustiyani
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Block Design ◽  
Chicken Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Two Factors ◽  
Number Of Leaves ◽  
Npk Fertilizer

<p><em>Cauliflower is one of the vegetables for consumers. The demand for cauliflower was rising so it must be scaled up with fertilizer. The purpose of this study was to study the effect of chicken manure and NPK fertilizer on the growth and yield of cauliflower. The study was conducted in Sukasenang Village, Banyuresmi Sub-district, Garut Regency from July to August 2019. The study used a Randomized Block Design (RBD) in two factors each of the 3 rates with 2 replications. The first factor was the rates of chicken manure which consisted of 0, 10 and 20 tons ha<sup>-1</sup>; the second factor was NPK fertilizer which consists of 0, 100 and 200 kg ha<sup>-1</sup>. The parameter of this research was plant height, number of leaves, leaf area, weight and diameter crud. The results showed that there was no interaction between the chicken manure and NPK fertilizer. The treatment of 20 tons ha<sup>-1</sup> chicken manure affected the variable plant height, the number of leaves and leaf area. The rates of 200 kg ha<sup>-1</sup> NPK fertilizer had affected plant height, number of leaves, weight and diameter crud.</em></p>

scholarly journals Controlling Poinsettia (Euphorbia pulcherrima Will.) Height with Growth Retardant Application in West Java, Indonesia

2016 ◽  
Vol 3 (3) ◽  
pp. 89-92
Author(s):  
Dewi Sukma ◽  
Gina Megawati
Keyword(s):  
Plant Height ◽  
Growth And Development ◽  
Leaf Size ◽  
Flowering Plants ◽  
Growth Retardant ◽  
Euphorbia Pulcherrima ◽  
West Java ◽  
Internodal Length ◽  
Potted Plant ◽  
Plant Shoots

A study was conducted to evaluate the effects of the growth retardant Cycocel application in the growth and development of poinsettia (Euphorbia pulcherrima) ‘Freedom Red’.  Cycocel was applied by spraying plant shoots at the concentrations of 1000, 1500, 2000, 2500 ppm. The increase in cycocel concentrations reduced plant height, leaf size, internodal length, plant spread and the number of flowering plants. All cycocel concentrations resulted in an ideal potted plant height. The optimum spray concentration of Cycocel used to obtain compact and uniformly flowering plants under tropical West Java environment was 1000 ppm.

scholarly journals Effect of planting time and supplemental irradiation on growth and flowering of Lachenalia ‘Romaud’ 

2019 ◽  
Vol 46 (No. 2) ◽  
pp. 72-80
Author(s):  
Anna Kapczyńska
Keyword(s):  
Chlorophyll A ◽  
Dry Weight ◽  
Planting Date ◽  
Flowering Plants ◽  
Light Conditions ◽  
Specific Time ◽  
Natural Lighting ◽  
Affected Plant ◽  
Inflorescence Stems ◽  
Pot Plant

Growth and flowering of lachenalia ‘Romaud’ was studied with reference to its commercial potential as pot plant and the need to obtain flowering plants at a specific time. The experiment was carried out in a heated glasshouse. Lachenalia bulbs were planted in November, December, January and February. The plants were exposed to two lighting regimes, natural lighting and natural lighting with supplemental irradiation (HPS lamps). The later the planting date was, the faster the bulbs flowered, and they produced thicker inflorescence stems with greater number of florets. Depending on the bulb planting date and light conditions, the plants flowered from February to May. The leaves obtained from the bulbs planted in November and December were longer than those produced by the bulbs planted in January and February. Compared with control, supplemental irradiation accelerated flowering by 10–13  days and positively affected plant features by promoting the growth of thicker inflorescence stems with more abundant and longer florets. The leaves of irradiated bulbs were shorter (apart from the bulbs planted in February) and were characterised by a higher content of chlorophyll a, chlorophyll a + b and carotenoids as compared with control. Plants grown under HPS light also had the higher dry weight of bulbs, leaves and stems.

scholarly journals 391 THE INFLUENCE OF COLD DURING SEEDLING STAGE AND PHOTOPERIOD ON FORCING PERENNIALS FOR POT PLANTS

HortScience ◽  
1994 ◽  
Vol 29 (5) ◽  
pp. 487b-487
Author(s):  
Allan M. Armitage ◽  
Paul Thomas
Keyword(s):  
Plant Height ◽  
Early Spring ◽  
Seedling Stage ◽  
Internode Elongation ◽  
Perennial Species ◽  
Photoperiodic Treatment ◽  
Short Days ◽  
Pot Plants

The influence of cooling, photoperiod and chemical branching on early spring flowering of perennial species was studied. Cooling was provided while plants were in plugs (128 plugs per tray) and dikegulac-sodium, a compound found to induce breaks in other species, was applied prior to, during and after cooling. Plants were cooled in insulated lighted coolers for 4, 8 or 12 weeks at 4C, and brought to a greenhouse with night temperatures between 8-12C. Long and short days were provided in the greenhouse after plants came out of the coolers. Little response to dikegulac occurred, however, Campanula, Sedum, Leontopodium, Catananche, Aubrietia, Arabis, Gypsophila, Anchusa and Aquilegia responded to cooling and photoperiodic treatment. Flowering and vegetative characteristics such as internode elongation and plant height responded to photoperiod and cooling but not all genera responded similarly. Anchusa, Campanula, Aquilegia and Gypsophila flowered significantly earlier under LD compared to SD. Twelve weeks of cooling resulted in flowering of all genera, however, some genera were equally responsive to shorter cooling times.

scholarly journals The Growth of FHIA-17 Banana Seedlings with Application of Hijauan Paitan Fertilizer (Titonia diversifolia) and Cow Manure

2019 ◽  
Vol 1 (4) ◽  
pp. 77-83
Author(s):  
Suswati Suswati ◽  
Asmah Indrawaty ◽  
Rizal Aziz ◽  
Eka Prasaditya Ramadhani
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Dry Weight ◽  
Cow Manure ◽  
Growing Media ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Wet Weight ◽  
Number Of Leaves

Growth of FHIA-17 Banana Seedlings with the Application of Hijauan Paitan Fertilizer (Titonia Diversifolia) and Cow Manure. The aim of this study was to obtain data on the growth of FHIA-17 banana seedlings after application of T.diversifolia forage and cow manure. Using a factorial Randomized Block Design (CRD) with two treatment factors. The first factor is the forage dose of T. diversifolia (P) with 5 levels, P0=Control; P1=12.5 g kg-1 planting medium (equivalent to 5 tons ha-1); P2=25 g kg-1 planting medium (equivalent to 10 tons ha-1); P3=37.5 g / kg of planting media (equivalent to 15 tons ha-1); P4=50 g kg-1 of growing media (equivalent to 20 tons ha-1). The second factor is the dose of cow manure (K) with 5 treatment levels namely, K0=Control; P1=12.5 g kg-1 of growing media (equivalent to 5 tons ha-1); K2=25 g kg-1 of growing media (equivalent to 10 tons ha-1); K3= 37.5 g kg-1 of growing media (equivalent to 15 tons ha-1); K4=50 g kg-1 planting medium (equivalent to 20 tons ha-1 and repeated 2 (two) times. Observed parameters were plant height (cm), number of leaves, stem circumference (mm), plant wet weight (g), plant dry weight (g). The results of this study indicate that the application of forage T. diversifolia significantly affected plant height and number of leaves. It’s not real with respect to all observational parameters.

Sign in / Sign up

Export Citation Format

Share Document