scholarly journals Yield and Fruit Quality Traits of Mamey Sapote Cultivars Grown at Two Locations in Puerto Rico

2012 ◽  
Vol 22 (2) ◽  
pp. 263-267 ◽  
Author(s):  
Ricardo Goenaga ◽  
David Jenkins
Keyword(s):  
Fruit Quality ◽  
Fruit Size ◽  
Fruit Yield ◽  
Soluble Solids ◽  
High Yield ◽  
Quality Traits ◽  
Export Markets ◽  
Solids Concentration ◽  
Significant Difference ◽  
Fruit Quality Traits

The demand for tropical fruits has increased significantly during the last decade as consumers seek healthy and more diverse food products. There is a lack of formal experimentation to determine yield performance and fruit quality traits of mamey sapote (Pouteria sapota) cultivars. Six mamey sapote cultivars (Copan, Magaña, Mayapan, Pace, Pantin, Tazumal) grown on Ultisol and Oxisol soils were evaluated for 5 years at Corozal and Isabela, PR, respectively. There was a significant difference in the number and weight of fruit per hectare between locations, averaging 25,929 fruit/ha and 16,527 kg·ha−1 at Corozal and 17,887 fruit/ha and 11,920 kg·ha−1 at Isabela. ‘Tazumal’ had the highest 5-year mean number and weight of fruit per hectare, but fruit of this cultivar was very small and contained several seeds, which could reduce its marketability. At Corozal, cultivars Tazumal and Magaña had significantly higher fruit yield per hectare than the rest of the cultivars, whereas ‘Magaña’, ‘Tazumal’, and ‘Pantín’ had the highest fruit yield at Isabela. At both locations, ‘Pantin’ had relatively high yield, above-average soluble solids concentration values, and adequate fruit size and weight for domestic and export markets (650–900 g), making this cultivar suitable for planting at various agroenvironments typical of the humid tropics.

scholarly journals Yield and Fruit Quality Traits of Rambutan Cultivars Grafted onto a Common Rootstock and Grown at Two Locations in Puerto Rico

2011 ◽  
Vol 21 (1) ◽  
pp. 136-140 ◽  
Author(s):  
Ricardo Goenaga ◽  
David Jenkins
Keyword(s):  
Fruit Quality ◽  
Ethnic Diversity ◽  
Soluble Solids ◽  
Quality Traits ◽  
Tropical Fruit ◽  
Solids Concentration ◽  
Nephelium Lappaceum ◽  
Significant Difference ◽  
Fruit Quality Traits ◽  
Soluble Solids Concentration

The globalization of the economy, increased ethnic diversity, and a greater demand for healthy and more diverse food products have opened a window of opportunity for the commercial production and marketing of tropical fruit, including rambutan (Nephelium lappaceum). There is a lack of formal experimentation to determine yield performance and fruit quality traits of rambutan cultivars. Eight rambutan cultivars (Benjai, Gula Batu, Jitlee, R-134, R-156Y, R-162, R-167, and Rongren) grown on an Ultisol and an Oxisol soils were evaluated for 5 years at Corozal and Isabela, PR, respectively. There was a significant difference in the number and weight of fruit per hectare between locations, averaging 415,103 fruit/ha and 13,826 kg·ha−1, respectively, at Corozal and 167,504 fruit/ha and 5149 kg·ha−1, respectively, at Isabela. At Corozal, ‘R162’ had the highest 5-year mean for number and weight of fruit per hectare, but this cultivar was not significantly different from the rest except for ‘Benjai’ and ‘R-156Y’, which had significantly lower values. At Isabela, cultivars Gula Batu and R-162 had significantly higher number of fruit per hectare but the latter was not different from ‘Benjai’. Overall, there were no differences in soluble solids concentration except for cultivars Gula Batu and R-156Y, which had significantly lower values at both locations. Cultivar R-162 had higher number and weight of fruit per hectare and high soluble solids concentration at both locations, making it suitable for planting in various agroenvironments particularly on Ultisols typical of the humid tropics.

scholarly journals Yield and Fruit Quality Traits of Atemoya Hybrids Grown in Puerto Rico

2016 ◽  
Vol 26 (4) ◽  
pp. 547-551
Author(s):  
Ricardo Goenaga ◽  
David Jenkins
Keyword(s):  
Puerto Rico ◽  
Fruit Quality ◽  
Soluble Solids ◽  
Quality Traits ◽  
Tropical Fruits ◽  
Annona Squamosa ◽  
Solids Concentration ◽  
Fruit Quality Traits ◽  
Marketable Fruit ◽  
Soluble Solids Concentration

As consumers seek healthy and more diverse food products, the demand for tropical fruits has increased significantly during the last 15 years. There is a lack of formal experimentation to determine the yield performance and fruit quality traits of atemoya (Annona squamosa × A. cherimola) hybrids. Six atemoya hybrids (‘Bradley’, ‘Geffner’, ‘Priestly’, ‘Lisa’, ‘47-18’, and ‘75-9’) grown on an Oxisol soil were evaluated for 4 years at Isabela, PR. ‘Geffner’ and ‘Lisa’ had the highest number of marketable fruit averaging 8542 fruit/ha, and the highest yield of marketable fruit, averaging 1507 kg·ha−1; they did not differ from each other, but were greater than all other hybrids. Individual weight of marketable fruit was significantly higher in ‘75-9’ and ‘Priestly’ which averaged 264.8 g. Significantly higher soluble solids concentration values were obtained from fruit of ‘75-9’, ‘Bradley’, and ‘Geffner’ which averaged 23.8%; they did not differ from each other, but were greater than all other hybrids.

scholarly journals Interrelations between productive, vegetative, and fruit quality traits in Tahiti acid lime through Bayesian inference

2022 ◽  
Vol 52 (5) ◽  
Author(s):  
Renan Garcia Malikouski ◽  
Emanuel Ferrari do Nascimento ◽  
Andréia Lopes de Morais ◽  
Marco Antônio Peixoto ◽  
Moises Zucoloto ◽  
...  
Keyword(s):  
Bayesian Inference ◽  
Fruit Quality ◽  
Deviance Information Criterion ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Quality Traits ◽  
Breeding Programs ◽  
Canopy Volume ◽  
Fruit Quality Traits ◽  
Acid Lime

ABSTRACT: Although the fruit yield has a core importance in Tahiti acid lime breeding programs, other traits stand out among the quality fruit and vegetative traits as ones that still need to be improved in selection of superior genotypes. Appling efficient tools aiming selection, such as the Bayesian inference, becomes an alternative in perennial crops. This study applied Bayesian inference in the genetic evaluation of Tahiti acid lime genotypes and estimated the interrelation between vegetative, productive and fruit quality traits. Twenty-four acid lime genotypes were evaluated for number of fruits, fruit yield, canopy volume, stem diameter, soluble solids content, shell thickness, and juice yield traits. The genotypic values were estimated through Bayesian inference and models with different residual structure were tested via deviance information criterion. Pearson’s correlation and the path analysis were estimated, removing the multicollinearity effect. The Bayesian inference estimates genotypic values with high selective accuracy. The correlations obtained between traits from different groups can be useful in selection strategies for improvement of Tahiti acid lime. The Bayesian inference demonstrated to be an important tool and should be considered in perennial breeding programs.

scholarly journals Historical Trends in Strawberry Fruit Quality Revealed by a Trial of University of Florida Cultivars and Advanced Selections

HortScience ◽  
2011 ◽  
Vol 46 (4) ◽  
pp. 553-557 ◽  
Author(s):  
Vance M. Whitaker ◽  
Tomas Hasing ◽  
Craig K. Chandler ◽  
Anne Plotto ◽  
Elizabeth Baldwin
Keyword(s):  
Fruit Quality ◽  
Fruit Size ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Quality Traits ◽  
University Of Florida ◽  
Fruit Quality Traits ◽  
Solids Content ◽  
Chemical Traits ◽  
Over Time

The University of Florida strawberry (Fragaria ×ananassa Duch. ex Rosier) breeding program has maintained a continuous breeding effort since 1968 to develop cultivars that are highly adapted to winter production in west-central Florida. To gain insight into breeding progress over time, two advanced selections (UF1 and UF2) and 10 released cultivars, from Florida Belle (1975) to Florida Radiance (2008), were compared for various fruit quality traits in a two-location field study during the 2009–2010 season. Fruit size varied dramatically from 30.8 g for ‘Elyana’ to 16.2 g for ‘Dover’ at Balm, FL, and from 28.3 g for UF2 to 16.6 g for ‘Dover’ at Dover, FL. A linear regression of fruit size on year of release revealed an average gain of 2.6 g per year since 1975 for the cultivars and selections tested (R2 = 0.44). A similar analysis revealed a reduction over time in the proportion of cull fruit (R2 = 0.30). Gains were apparent for the redness of the internal flesh, from a colorimeter a* value of 16.1 for ‘Florida Belle’ (1975) to 34.7 for ‘Carmine’ (2002) but were not sustained for later releases and selections. Although there were significant differences among genotypes for all chemical traits affecting flavor, there were no discernable patterns over time. There were wide month-to-month variations in individual sugars and organic acids, except for citric acid, which was stable across months and locations. The ratio of soluble solids content to titratable acidity ranged widely among genotypes, from a high of 15.7 for ‘Florida Belle’ in February at Dover, FL, to a low of 6.4 for ‘Winter Dawn’ in January at Balm, FL. The observed variability and trends in fruit quality traits will help guide future genetic studies and inform decisions about future breeding priorities and selection procedures.

scholarly journals High-density linkage map construction and identification of loci regulating fruit quality traits in blueberry

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Molla F. Mengist ◽  
Hamed Bostan ◽  
Elisheba Young ◽  
Kristine L. Kay ◽  
Nicholas Gillitt ◽  
...  
Keyword(s):  
Linkage Map ◽  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
High Density ◽  
Soluble Solids ◽  
Quality Traits ◽  
Total Soluble Solids ◽  
Fruit Quality Traits ◽  
High Density Linkage Map

AbstractFruit quality traits play a significant role in consumer preferences and consumption in blueberry (Vaccinium corymbosum L). The objectives of this study were to construct a high-density linkage map and to identify the underlying genetic basis of fruit quality traits in blueberry. A total of 287 F1 individuals derived from a cross between two southern highbush blueberry cultivars, ‘Reveille’ and ‘Arlen’, were phenotyped over three years (2016–2018) for fruit quality-related traits, including titratable acidity, pH, total soluble solids, and fruit weight. A high-density linkage map was constructed using 17k single nucleotide polymorphisms markers. The linkage map spanned a total of 1397 cM with an average inter-loci distance of 0.08 cM. The quantitative trait loci interval mapping based on the hidden Markov model identified 18 loci for fruit quality traits, including seven loci for fruit weight, three loci for titratable acidity, five loci for pH, and three loci for total soluble solids. Ten of these loci were detected in more than one year. These loci explained phenotypic variance ranging from 7 to 28% for titratable acidity and total soluble solid, and 8–13% for pH. However, the loci identified for fruit weight did not explain more than 10% of the phenotypic variance. We also reported the association between fruit quality traits and metabolites detected by Proton nuclear magnetic resonance analysis directly responsible for these fruit quality traits. Organic acids, citric acid, and quinic acid were significantly (P < 0.05) and positively correlated with titratable acidity. Sugar molecules showed a strong and positive correlation with total soluble solids. Overall, the study dissected the genetic basis of fruit quality traits and established an association between these fruit quality traits and metabolites.

scholarly journals Phenotypic Evaluation of a Hybrid Diploid Blueberry Population for Plant Development and Fruit Quality Traits

Agronomy ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1067
Author(s):  
Lisa J. Rowland ◽  
Elizabeth L. Ogden ◽  
Bryan T. Vinyard
Keyword(s):  
Fruit Quality ◽  
Plant Development ◽  
Cold Hardiness ◽  
Soluble Solids ◽  
Chilling Requirement ◽  
Quality Traits ◽  
Flower Bud ◽  
Phenotypic Data ◽  
Fruit Quality Traits ◽  
Highly Correlated

A diploid blueberry mapping population, used previously to map quantitative trait loci (QTL) for chilling requirement and cold hardiness, was evaluated for several plant development and fruit quality traits. Specifically, the population was phenotyped in a greenhouse for timing of various stages of flower bud, leaf bud and fruit development and for fruit quality traits including weight, diameter, color, scar, firmness, flavor and soluble solids. Phenotypic data was analyzed statistically by analysis of variance, correlation tests, to examine associations of traits, and heritability. Results indicated that the traits were segregating and most were distributed normally in the population. Many of the development traits were correlated, and timing of shoot expansion, early bloom and full bloom was also correlated with the previously evaluated trait of chilling requirement. Some correlations were found among the fruit quality traits as well. For example, weight was highly correlated with diameter, and subjectively measured firmness was moderately correlated with one of the objectively measured firmness traits. In addition, most of the traits showed significant variation across genotypes and across years, and most had moderate to high heritability. Therefore, we conclude that the diploid population should be useful for identifying QTL for many of these traits.

Use of Lycopersicon cheesmanii and L. chmielewskii to increase dry matter content of tomato fruit

1993 ◽  
Vol 73 (1) ◽  
pp. 273-279 ◽  
Author(s):  
V. Poysa
Keyword(s):  
Lycopersicon Esculentum ◽  
Dry Matter ◽  
Tomato Fruit ◽  
Fruit Size ◽  
Fruit Yield ◽  
Soluble Solids ◽  
High Yield ◽  
Dry Matter Content ◽  
Total Solids ◽  
Solids Content

Advanced lines and backcrosses from interspecific hybridization of processing tomato (Lycopersicon esculentum Mill.) with six L. chmielewskii (Rick, Kesicki, Fobes and Holle) and L. cheesmanii (Riley) accessions were evaluated in the field over 2 yr for soluble solids content (SSC), total solids content (TSC), fruit yield and fruit size to determine the effectiveness of combining elevated solids levels with high fruit yield and size following early generation selection. More than a quarter of the lines had significantly higher SSC levels than the recurrent tomato parent, Purdue 812 (P812). Several lines combined high SSC and TSC with high fruit yield and large fruit size to produce more dry matter yield per hectare or per fruit than P812. Two backcrosses were optimal for combining high SSC and high yield. SSC and TSC were negatively correlated with fruit size and, to a lesser degree, with fruit yield. Key words: Lycopersicon esculentum, soluble solids, total solids

scholarly journals Effect of Mid-day Reduction of High Electrical Conductivity Treatment on the Yield and Quality of Greenhouse Cherry Tomato

2008 ◽  
Vol 18 (3) ◽  
pp. 460-466 ◽  
Author(s):  
Johann S. Buck ◽  
Chieri Kubota ◽  
Merle Jensen
Keyword(s):  
Electrical Conductivity ◽  
Fruit Quality ◽  
Environmental Control ◽  
Fruit Size ◽  
Soluble Solids ◽  
Cherry Tomato ◽  
Cumulative Yield ◽  
Total Soluble Solids ◽  
Solids Concentration ◽  
Cultivar Selection

Cherry tomato (Solanum lycopersicum var. cerasiforme) plants were grown hydroponically with three different regimes of electrical conductivity (EC) of the nutrient solution to develop an effective EC management method to enhance the fruit quality. The EC treatments examined were 1) continuous high EC [4.7 dS·m−1 (HE)], 2) continuous low EC [2.8 dS·m−1 (LE)], and 3) high EC combined with midday (1030–1530 hr) low EC [midday reduction of high EC (MDR)]. The research was conducted to obtain preliminary information on the effect of EC treatments on the yield and fruit quality for 15 weeks of harvest under semiarid greenhouse conditions. Harvested fruit were sorted to several quality grades, including the “premium” grade based on fruit size, color, and total soluble solids. The number of fruit per truss was significantly higher in cultivar L308 than in cultivar L907 and in the LE treatment than in the HE or MDR treatment. The fruit size decreased over time regardless of EC treatment and cultivar. Cumulative yield of 15 weeks was greater in the LE treatment (26.3 kg·m−2) than in the HE treatment (22.1 kg·m−2) for ‘L907’, and there were no significant differences between the three EC treatments for ‘L308’ (24.1–28.1 kg·m−2). The cumulative yield in the MDR treatment was similar to that in the LE treatment regardless of cultivar. When quality attributes such as total soluble solids concentration measured for randomly sampled fruit were considered, cumulative premium-grade yield was the greatest for the HE treatment (12.9 or 17.6 kg·m−2) and was the smallest for the LE treatment (1.4 or 12.1 kg·m−2), regardless of cultivar. The cumulative yield of premium-grade cherry tomatoes in the MDR treatment was not significantly different from that in the HE treatment for ‘L308’ but was 11% less than that in the HE treatment for ‘L907’. Therefore, together with cultivar selection, the MDR treatment may be a potential alternative to a more commonly practiced continuously high EC treatment in semiarid greenhouses with limited environmental control capacity in which increasing the nutrient EC to increase quality is desired without significantly decreasing yield.

scholarly journals QUALIDADE E PRODUTIVIDADE DE FRUTOS DE FIGO CULTIVADO EM TRÊS DENSIDADES DE PLANTIO

2018 ◽  
Vol 14 (4) ◽  
pp. 161-166
Author(s):  
Scheila Lucia Ecker ◽  
Clevison Luiz Giacobbo ◽  
Leandro Galon ◽  
Adriana Lugaresi ◽  
Gian Carlos Girardi
Keyword(s):  
Fruit Quality ◽  
Dry Matter ◽  
Fruit Size ◽  
Dry Mass ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Planting Density ◽  
Significant Difference ◽  
Fig Tree

The objective of this work was to verify the influence of planting density on productivity and fruit quality of the fig tree. The design was used in three blocks, the plants of the cultivar Roxo de Valinhos were submitted to three planting spacings: 5 x 0.5 m; 5 x 1.0 m; and 5 x 1.5 m. The evaluated characteristics were: length of branches; average weekly growth of branches; fruit size; average fruit weight;soluble solids (°Brix); yield of mature fruits; productivity of green fruits; accumulated productivity; and dry mass of fruits.The length of the branches was not influenced by planting spacing, the plants conducted at lower densities presented higher productivity, both of green fruits and accumulated productivity.Plants submitted to lower planting density produced fruits with higher dry matter, but these were smaller in size, but without significant difference for those submitted to lower density. It wasconcluded that productivity is directly affected by fig planting density, but not all the qualitative aspects of the fruits were affected.

Sign in / Sign up

Export Citation Format

Share Document