scholarly journals Stand Survival, Establishment, and Yield of a Diploid and a Triploid Watermelon Transplants of Different Ages and Sizes

1999 ◽  
Vol 9 (4) ◽  
pp. 656-660
Author(s):  
John R. Duval ◽  
D. Scott NeSmith

Age and cell size can have various effects on subsequent transplant production. The interaction of the two have not been studied in triploid watermelon [Citrullus lanatus (Thunb.) Matsum & Nakai]. Seedless watermelon production is costly due to high seed prices, therefore it is necessary to optimize transplant performance in the field, and it is often thought that triploid watermelons are less hardy than their diploid counterparts. A 3 × 3 factorial design was established for 2 years to determine the effects of cell sizes 1.5, 3.4, and 7.9 inch3 (25, 56, and 130 cm3) and transplant age (4, 6, and 8 weeks) on the triploid watermelon `Genesis'. The diploid cultivar `Ferrari' was also planted for comparison. Seedling survival was affected by transplant age in 1997, and by cell size in 1998. Early main vine growth showed significant interaction between transplant age and cell size, with older transplants grown in the largest cells producing the longest vines. Early yield of 6-week-old transplants of `Genesis' was higher than 4- or 8-week-old transplants in 1997. Eight-week-old transplants of `Ferrari' outperformed younger transplants in 1997 and 1998. Results show that `Genesis' triploid watermelon transplants could be handled similarly to the diploid `Ferrari' without consequence.

2003 ◽  
Vol 13 (1) ◽  
pp. 58-61 ◽  
Author(s):  
Dena C. Fiacchino ◽  
S. Alan Walters

During the 1999 and 2000 growing seasons in Illinois, studies were conducted to determine the influence of two pollinizers (`Crimson Sweet' and `Fiesta') and three pollinizer frequencies (11%, 20%, and 33%) on `Millionaire' seedless watermelon (Citrullus lanatus) quality and yields. More large-sized [>16 lb (7.2 kg)] `Millionaire' watermelons were produced when `Crimson Sweet' was used as the pollinizer compared to `Fiesta', which resulted in `Crimson Sweet' leading to greater marketable and total `Millionaire' yields. Pollinizers responded similarly over the pollinizer frequencies for `Millionaire' watermelon yields as no pollinizer by pollinizer frequency interaction was observed. The 20% and 33% pollinizer frequencies produced similar `Millionaire' yields per acre and both resulted in greater yields compared to the 11% pollinizer frequency. Soluble solids in `Millionaire' fruits were not influenced by pollinizer or pollinizer frequency. However, hollow heart disorder followed a quadratic response with respect to pollinizer frequency with the lowest amount of hollow heart observed at the 33% pollinizer frequency and greatest at the 11% pollinizer frequency. No significant interaction (P ≤ 0.05) was observed for pollinizer by pollinizer frequency for hollow heart disorder in `Millionaire'; although, more hollow heart disorder in `Millionaire' was observed when `Fiesta' was used as the pollinizer.


2019 ◽  
Vol 2 (1) ◽  
pp. 364-373
Author(s):  
Ahmad Ihwanudin ◽  
Sri Hartatik ◽  
Kacung Hariyono ◽  
Josi Ali Arifandi

Triploid watermelon seeds are produced from the crossing between watermelon diploid as males and tetraploid watermelons as females. The success of triploid seed formation is influenced by the success of pollination determined by pollen viability which is characterized by the period of anthesis and peptic receptivity by the time of pollination. This experiment was conducted in Jember  on 2018. The Factorial Randomized Block Design, 3x3  with three replications, was concucted to determine the effect of male anthesis period and pollination time on the success rate of seedless watermelon seed formation. The results showed that no significant interaction of the male anthesis period and the time of pollination effect. Pollens harvested during pre anthesis give the best pollination results. On the other hand, the best pollination can be done at 07.30 – 08.30 am  Keywords: anthesis, pollination, seeds, seedless watermelon.


HortScience ◽  
2008 ◽  
Vol 43 (1) ◽  
pp. 274-275 ◽  
Author(s):  
Josh H. Freeman ◽  
Stephen M. Olson ◽  
Eileen A. Kabelka

In the Spring and Fall 2006, the pollen viability of four diploid watermelon pollenizers was evaluated in Quincy, FL. Triploid watermelon plants [Citrullus lanatus (Thunb.) Matsum. & Nakai.] do not produce sufficient viable pollen to pollenize themselves and a diploid cultivar must be interplanted as a pollen source. Recent studies have illustrated differences in triploid watermelon yields as a result of the pollenizer cultivar used. The viability of the pollen produced by pollenizer cultivars may greatly influence the fruit set and fruit quality in the triploid watermelon crop. Pollen samples were taken from ‘Companion’, ‘Jenny’, ‘Mickylee’, and ‘SP-1’ and were stained to determine their viability. There were no significant differences in pollen viability among cultivars and all cultivars had high average viability. Pollen viability was never lower than 95% for any cultivar. This study indicates that pollen viability of the cultivars evaluated should not influence their effectiveness as pollenizers.


HortScience ◽  
2008 ◽  
Vol 43 (1) ◽  
pp. 149-152
Author(s):  
Francisco Javier Núñez ◽  
Maria Victoria Huitrón ◽  
Manuel Díaz ◽  
Fernando Diánez ◽  
Francisco Camacho-Ferre

In Spain, the adoption of the triploide ‘Queen of Hearts’ (Citrullus lanatus Thunb.) watermelon cultivar has brought important changes in the production of seedless watermelon thanks to its magnificent acceptance by the market. The experiments on triploid watermelon presented here examined innovative production techniques that would guarantee the productivity and quality of this cultivar in plastic greenhouses and improve cost-effectiveness, serving growers. Crop intensification was tested under a “temporary trellis” management system, increasing plant density from 2500 plants/ha in the traditional or creeping crop system to 10,000 plants/ha. The “temporary trellis” system was combined with fruit set through the localized application of a 150- to 200-mg·L−1 solution of 1-(2-chloro-4-pyridyl)-3-phenylurea (CPPU). The increase of grafted watermelon plant density to 1 plant/m2 gave rise to an increase in early harvest measured as the number of fruits per surface area compared with the traditional system with a density of 0.25 plant/m2. In addition, a process of temporary trellising facilitates choosing female flowers for applying CPPU. The °Brix and pulp firmness quality parameters did not show significant differences between “temporary trellised” and creeping crops.


HortScience ◽  
2014 ◽  
Vol 49 (6) ◽  
pp. 714-721 ◽  
Author(s):  
Cecilia E. McGregor ◽  
Vickie Waters

The past 10 years has seen a steep increase in production of seedless watermelon (Citrullus lanatus) in the United States. Seedless fruit is produced on triploid plants that require pollination from diploid pollenizers for fruit set. Synchronization of the staminate flowers on the pollenizers with the appearance of pistillate flowers on the triploids is a fundamental requirement for this production system. Previous research suggested that pistillate flowers reach peak production early in the season, but data are only available for a small number of triploid cultivars. We compared the flowering patterns of 29 triploid cultivars and 20 pollenizers, including 10 harvested pollenizers, during the first 6 weeks after transplanting over 2 years. The average number of days from transplanting (DAT) to the first staminate flower was between 5.3 days and 19.1 days in 2012 and 9.7 days and 24.4 days in 2013 for the pollenizers and between 18.7 days and 27.6 days and 22.1 days and 32.7 days for the pistillate triploid flowers in the 2 years, respectively. K-means clustering of the weekly percentage of plants with staminate and pistillate flowers for the different cultivars shows that different triploid and pollenizer cultivars have different flowering patterns and that some combinations have better synchronized flowering than others. Growers should take particular care when choosing pollenizers for early-flowering triploid cultivars. Harvested pollenizers are better suited to late-flowering triploids and growers should choose triploid and pollenizer cultivar combinations with flowering patterns that best satisfy their specific production goals.


HortScience ◽  
2007 ◽  
Vol 42 (3) ◽  
pp. 559-564 ◽  
Author(s):  
Maria Victoria Huitrón ◽  
Manuel Diaz ◽  
Fernando Diánez ◽  
Francisco Camacho ◽  
Antonio Valverde

Pollination is one problem with intensive seedless watermelon (Citrullus lanatus Thunb.) production under unfavorable environmental conditions (low solar radiation and temperature) due to the lowered activity of pollinating insects, such as the bee (Apis mellifera L.). An alternative to overcome these problems is the use of plant growth regulators. For this reason, experiments were conducted for 2 years in plastic greenhouses in the fields of Almeria, southwestern Spain, to evaluate the production and quality of ‘Reina de corazones’ triploid watermelon grafted onto RS841 rootstock (Cucurbita maxima × Cucurbita moschata). Two phytoregulators were used for the development of the ovary: 1-(2-chloro-4-pyridyl)-3-phenylurea (CPPU) and 2,4-dichlorophenoxyacetic acid (2,4-D). Concentrations of CPPU evaluated were 50, 100, 150, and 200 mg·L−1. An application of 0.6 mL was applied to each ovary in addition to 4, 6, 8, or 12 mg·L−1 of 2,4-D to the foliar mass at a proportion of 1000 L·ha−1. Results showed that the production and number of fruit obtained with CPPU treatments were similar to what is obtained by using bees for fruit pollination. Maximum production was reached at concentrations of 100–200 mg·L−1. Average production was 32% to 83% higher than results from 2,4-D at 8 mg·L−1. The number of fruit per plant was 33% to 35% higher as well. In the first assay, a positive correlation was also observed between production and CPPU concentration. CPPU treatments had a lower accumulation of sugars than those with 2,4-D; nevertheless, both treatments showed values of commercially acceptable soluble solids.


2003 ◽  
Vol 128 (2) ◽  
pp. 253-259 ◽  
Author(s):  
Stacie Grange ◽  
Daniel I. Leskovar ◽  
Leonard M. Pike ◽  
B. Gregory Cobb

Triploid or seedless watermelon [Citrullus lanatus (Thunb.) Matsum & Nakai] cultivars often have erratic germination and low seedling vigor. The morphology of the seedcoat on two triploid cultivars—Tri X 313 and Tri X Sunrise—was examined by scanning electron microscopy (SEM) to identify structural differences compared to diploid seeds. Triploid seeds incubated with oxygen-enhanced treatments that included nicking, 1% hydrogen peroxide (H2O2), and 40% oxygen were investigated at low and high medium moisture levels. Triploid seed has a thicker seedcoat with a dense endotesta layer and a larger and highly variable air space surrounding the embryonic axis as compared with diploid seed. All cultivars rapidly imbibed water (≈50% of the original weight) during the first hour of imbibition, with a faster increase for triploids than for diploids. High moisture affected germination to a lesser extent in diploid than triploid seeds. Triploid germination under low medium moisture ranged from 96% to 76%, but was severely reduced to <27% under high medium moisture. Triploid seed germination was significantly improved at high moisture by H2O2 and by 40% oxygen. Triploid watermelon seed is very sensitive to submerged conditions, possibly due to a combination of physiological and morphological defects. The rapid imbibition and excess water collected in the seedcoat and air space surrounding the embryo, could reduce oxygen diffusion and impair metabolic pathways leading to normal germination and seedling development.


HortScience ◽  
2020 ◽  
Vol 55 (12) ◽  
pp. 1926-1930
Author(s):  
Marlee A. Trandel ◽  
Penelope Perkins-Veazie ◽  
Jonathan Schultheis

In triploid (seedless) watermelon [Citrullus lanatus var. lanatus (Thunb. Matsum. and Nakai)], hollow heart (HH) is a disorder that is expressed as a crack in the center of the fruit that expands to an open cavity. Although HH incidence and severity is part of a screening process for marketable watermelon fruit during cultigen evaluations, HH incidence is highly variable with growing season, even when the best cultural practices are used. Placental tissue firmness is also measured because firmness is related to the marketability of watermelon and may be related to HH. Genetic and environmental factors can influence watermelon HH development, including plant genetics, pollen amount and viability, pollinator activity, and temperature and rainfall fluctuations. We used seedless watermelon cultigen evaluation data collected over 3 years (2012–14) to determine the relationship between germplasm HH and tissue firmness. Transplanted watermelon representing 30 to 44 cultigens per year were grown at the Central Crops Research Station, Clayton, NC, and interplanted with pollenizers ‘Ace’ and/or ‘SP-6’. Harvested fruit were cut length-wise and rated for HH incidence and severity. Flesh firmness was determined by a handheld penetrometer at five locations in the flesh (stem end, top side, ground spot, blossom end, and heart). A common cultigen subset, consisting of 13 cultigens that were grown in all three experiments, was used for analysis of HH severity and incidence, and placental firmness. The presence of HH was negatively correlated with tissue firmness in both the large multiyear cultigen set (R2 = −0.32; P = 0.0001) and the common cultigen set (R2 = −0.78; P = 0.0001). Cultigens with lower watermelon tissue firmness values had higher HH incidence and severity. By using multiyear cultigen studies and logistic regression, we were able to detect trends for cultigen susceptibility to this highly variable disorder. Using logistic regression, the probability of HH development was highest for ‘Bold Ruler’, ‘Liberty’, and ‘Affirmed’, and lowest for ‘Maxima’ and ‘Captivation’. The identification of cultigens with a tendency for higher or lower rates of HH will be useful for further research of the causes of HH. Measurements of placental flesh firmness may be useful indicators of susceptible cultigens.


1980 ◽  
Vol 46 (2) ◽  
pp. 343-348 ◽  
Author(s):  
Victor M. Catano

The impact on jurors' decision making of the non-evidential characteristics of witnesses' and defendant's attractiveness and the agreement of their testimony was explored in a 2 × 2 × 2 between-subjects factorial design. 48 undergraduates read a summary of a courtroom trial in which an eyewitness, who was either a professional (High Attractive) or laborer (Low Attractive), either agreed or disagreed with the testimony of a defendant whose character had been assessed positively (High Attractive) or negatively (Low Attractive). Dependent variables were subjects' verdicts and confidence in the witnesses' and defendant's testimony. Conflict in testimony between the witness and defendant led to higher ratings of guilt but lowered the subject's confidence in the testimony of both. A significant interaction of witness × defendant × testimony showed that ratings of guilt decreased when a witness testified against a defendant who was dissimilar in attractiveness; an unattractive witness supporting an attractive defendant also reduced assessment of guilt but an attractive witness who testified for an unattractive defendant increased findings of guilt. Results were discussed in the context of relevant research involving simulated jurors.


2021 ◽  
Vol 924 (1) ◽  
pp. 012085
Author(s):  
A Soplanit ◽  
M K Rumbarar ◽  
P Beding

Abstract This study aims to obtain sucker weight and appropriate seedling site as a source of sago seeds by using seedling techniques in polybags to improve seed quality on sago cultivation. The experiment used a factorial design arranged in a randomized block design with three replications. Factor A, namely sucker weight, consisted of <999 g, 1000-1499 g, 1500-1999 g and > 2000 g. Factor B is the seedling site, consisting of laying seeds in the field, greenhouse and paranet of 60%. The results of the study showed that there was no interaction between the sucker weight combined with the seedling site, but the sucker weight had a significant effect on the number of rachis and the number of primary roots per plant and the percentage of life seedlings. Higher rachis growth was 3.8 obtained from medium-sized sucker weights (1000-1499 g and 1500-1999 g) and the highest number of primary roots was 41.3. It is obtained at sucker weights of 1000-1499 g. Meanwhile, the higher percentage of seedling survival was obtained at medium to large sucker weights of 66.3-71.0%. Thus, multiplication of sago seeds using medium-sized sucker on polybag media is highly suggested.


Sign in / Sign up

Export Citation Format

Share Document