Descents in High-Frequency Enhanced Plasma and Ion Lines During Ionospheric Heating at Eiscat

Abstract. During an ionospheric heating campaign carried out at the European Incoherent Scatter Scientific Association (EISCAT), the ultra high frequency incoherent scatter (IS) radar observed a systematic variation in the altitude of the high-frequency enhanced plasma line (HFPL), which behaves depending on the pump frequency. Specifically, the HFPL altitude becomes lower when the pump lies above the 5th gyro-harmonic. The analysis shows that the enhanced electron temperature plays a decisive role in the descent in the HFPL altitude. That is, on the traveling path of the enhanced Langmuir wave, the enhanced electron temperature can only be matched by the low electron density at a lower altitude so that the Bragg condition can be satisfied, as expected from the dispersion relation of Langmuir wave.

Download Full-text

Cluster observations of ELF/VLF signals generated by modulated heating of the lower ionosphere with the HAARP HF transmitter

Annales Geophysicae ◽

10.5194/angeo-22-2643-2004 ◽

2004 ◽

Vol 22 (7) ◽

pp. 2643-2653 ◽

Cited By ~ 14

Author(s):

M. Platino ◽

U. S. Inan ◽

T. F. Bell ◽

J. Pickett ◽

E. J. Kennedy ◽

...

Keyword(s):

High Frequency ◽

Lower Ionosphere ◽

Spectral Signature ◽

Closed Field ◽

Ionospheric Heating ◽

Higher Power ◽

Power Operation ◽

Field Lines ◽

Vlf Waves

Abstract. It is now well known that amplitude modulated HF transmissions into the ionosphere can be used to generate ELF/VLF signals using the so-called "electrojet antenna". Although most observations of the generated ELF/VLF signals have been made on the ground, several low and high-altitude satellite observations have also been reported (James et al., 1990). One of the important unknowns in the physics of ELF/VLF wave generation by ionospheric heating is the volume of the magnetosphere illuminated by the ELF/VLF waves. In an attempt to investigate this question further, ground-satellite conjunction experiments have recently been conducted using the four Cluster satellites and the HF heater of the High-Frequency Active Auroral Research Program (HAARP) facility in Gakona, Alaska. Being located on largely closed field lines at L≈4.9, HAARP is currently also being used for ground-to-ground type of ELF/VLF wave-injection experiments, and will be increasingly used for this purpose as it is now being upgraded for higher power operation. In this paper, we describe the HAARP installation and present recent results of the HAARP-Cluster experiments. We give an overview of the detected ELF/VLF signals at Cluster, and a possible explanation of the spectral signature detected, as well as the determination of the location of the point of injection of the HAARP ELF/VLF signals into the magnetosphere using ray tracing.

Download Full-text

Ionospheric heating with oblique high-frequency waves

Journal of Geophysical Research Atmospheres ◽

10.1029/ja095ia12p21179 ◽

1990 ◽

Vol 95 (A12) ◽

pp. 21179 ◽

Cited By ~ 6

Author(s):

Edward C. Field ◽

Ronald M. Bloom ◽

Paul A. Kossey

Keyword(s):

High Frequency ◽

Ionospheric Heating ◽

High Frequency Waves

Download Full-text

Altitude descents in high-frequency enhanced plasma and ion lines during ionospheric heating at EISCAT

Journal of Atmospheric and Solar-Terrestrial Physics ◽

10.1016/j.jastp.2020.105425 ◽

2020 ◽

pp. 105425

Author(s):

Jun Wu ◽

N.F. Blagoveshchenskaya ◽

Jian Wu ◽

Xuhui Shen ◽

Michael T. Rietveld ◽

...

Keyword(s):

High Frequency ◽

Ionospheric Heating

Download Full-text

The Intensities of High Frequency‐Enhanced Plasma and Ion Lines During Ionospheric Heating

Journal of Geophysical Research Space Physics ◽

10.1029/2018ja025918 ◽

2019 ◽

Vol 124 (1) ◽

pp. 603-615

Author(s):

Jun Wu ◽

Jian Wu ◽

M. T. Rietveld ◽

I. Haggstrom ◽

Zhengwen Xu ◽

...

Keyword(s):

High Frequency ◽

Ionospheric Heating

Download Full-text

The Microstructure of Steatite (Protoenstatite)

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100118102 ◽

1985 ◽

Vol 43 ◽

pp. 236-237

Author(s):

W. E. Lee ◽

A. H. Heuer

Keyword(s):

High Frequency ◽

Glass Ceramics ◽

Magnesium Silicate ◽

Beam Current ◽

Glassy Matrix ◽

Angle Of Incidence ◽

X Ray ◽

Mechanical And Electrical Properties ◽

Argon Ions ◽

High Temperature Polymorph

IntroductionTraditional steatite ceramics, made by firing (vitrifying) hydrous magnesium silicate, have long been used as insulators for high frequency applications due to their excellent mechanical and electrical properties. Early x-ray and optical analysis of steatites showed that they were composed largely of protoenstatite (MgSiO3) in a glassy matrix. Recent studies of enstatite-containing glass ceramics have revived interest in the polymorphism of enstatite. Three polymorphs exist, two with orthorhombic and one with monoclinic symmetry (ortho, proto and clino enstatite, respectively). Steatite ceramics are of particular interest a they contain the normally unstable high-temperature polymorph, protoenstatite.Experimental3mm diameter discs cut from steatite rods (∼10” long and 0.5” dia.) were ground, polished, dimpled, and ion-thinned to electron transparency using 6KV Argon ions at a beam current of 1 x 10-3 A and a 12° angle of incidence. The discs were coated with carbon prior to TEM examination to minimize charging effects.

Download Full-text

Simulations of high-resolution images of amorphous silicon films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010014419x ◽

1986 ◽

Vol 44 ◽

pp. 544-545

Author(s):

G. Y. Fan ◽

J. M. Cowley

Keyword(s):

Electron Microscope ◽

High Frequency ◽

Fourier Transformation ◽

Amorphous Materials ◽

Low Frequency ◽

Chromatic Aberration ◽

Structure Information ◽

Frequency Components ◽

High Resolution Images ◽

Spatial Frequency Spectrum

It is well known that the structure information on the specimen is not always faithfully transferred through the electron microscope. Firstly, the spatial frequency spectrum is modulated by the transfer function (TF) at the focal plane. Secondly, the spectrum suffers high frequency cut-off by the aperture (or effectively damping terms such as chromatic aberration). While these do not have essential effect on imaging crystal periodicity as long as the low order Bragg spots are inside the aperture, although the contrast may be reversed, they may change the appearance of images of amorphous materials completely. Because the spectrum of amorphous materials is continuous, modulation of it emphasizes some components while weakening others. Especially the cut-off of high frequency components, which contribute to amorphous image just as strongly as low frequency components can have a fundamental effect. This can be illustrated through computer simulation. Imaging of a whitenoise object with an electron microscope without TF limitation gives Fig. 1a, which is obtained by Fourier transformation of a constant amplitude combined with random phases generated by computer.

Download Full-text

SEM image sharpness analysis

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100163174 ◽

1996 ◽

Vol 54 ◽

pp. 142-143

Author(s):

M. T. Postek ◽

A. E. Vladar

Keyword(s):

High Frequency ◽

Low Frequency ◽

Quantitative Information ◽

Primary Electron ◽

Image Sharpness ◽

Critical Dimensions ◽

Sem Image ◽

Frequency Changes ◽

Electron Microscopes ◽

Scanning Electron

Fully automated or semi-automated scanning electron microscopes (SEM) are now commonly used in semiconductor production and other forms of manufacturing. The industry requires that an automated instrument must be routinely capable of 5 nm resolution (or better) at 1.0 kV accelerating voltage for the measurement of nominal 0.25-0.35 micrometer semiconductor critical dimensions. Testing and proving that the instrument is performing at this level on a day-by-day basis is an industry need and concern which has been the object of a study at NIST and the fundamentals and results are discussed in this paper.In scanning electron microscopy, two of the most important instrument parameters are the size and shape of the primary electron beam and any image taken in a scanning electron microscope is the result of the sample and electron probe interaction. The low frequency changes in the video signal, collected from the sample, contains information about the larger features and the high frequency changes carry information of finer details. The sharper the image, the larger the number of high frequency components making up that image. Fast Fourier Transform (FFT) analysis of an SEM image can be employed to provide qualitiative and ultimately quantitative information regarding the SEM image quality.

Download Full-text

Real Ear Sound Pressure Levels Developed by Three Portable Stereo System Earphones

American Journal of Audiology ◽

10.1044/1059-0889.0104.52 ◽

1992 ◽

Vol 1 (4) ◽

pp. 52-55 ◽

Cited By ~ 4

Author(s):

Gail L. MacLean ◽

Andrew Stuart ◽

Robert Stenstrom

Keyword(s):

High Frequency ◽

Sound Pressure ◽

Low Frequency ◽

Test System ◽

Output Frequency ◽

Frequency Effects ◽

Adult Men ◽

Frequency Responses ◽

Significant Difference ◽

Sound Pressure Levels

Differences in real ear sound pressure levels (SPLs) with three portable stereo system (PSS) earphones (supraaural [Sony Model MDR-44], semiaural [Sony Model MDR-A15L], and insert [Sony Model MDR-E225]) were investigated. Twelve adult men served as subjects. Frequency response, high frequency average (HFA) output, peak output, peak output frequency, and overall RMS output for each PSS earphone were obtained with a probe tube microphone system (Fonix 6500 Hearing Aid Test System). Results indicated a significant difference in mean RMS outputs with nonsignificant differences in mean HFA outputs, peak outputs, and peak output frequencies among PSS earphones. Differences in mean overall RMS outputs were attributed to differences in low-frequency effects that were observed among the frequency responses of the three PSS earphones. It is suggested that one cannot assume equivalent real ear SPLs, with equivalent inputs, among different styles of PSS earphones.

Download Full-text