Features of building 3D printers and ways to improve them

2020 ◽  
pp. 136-142
Author(s):  
Л.Е. Суркова ◽  
Д.В. Давыдов
Keyword(s):  
Construction Industry ◽  
System Analysis ◽  
3D Printer ◽  
Design Features ◽  
Printing Technology ◽  
Advantages And Disadvantages ◽  
Control Actions ◽  
3D Printers ◽  
The Subject

В работе рассмотрены возможности использования 3D принтеров в строительной отрасли, выделены преимущества и недостатки используемых технологий. Предметом исследования выступают конструкционные особенности 3D принтеров и возможности их усовершенствования. Для этого использованы методы системного анализа и декомпозиции. В результате работы рассмотрены 3D принтеры, выбрана технология печати как основа для совершенствования. Проведена декомпозиция технических характеристик 3D принтера, оказывающих непосредственное влияние на результат его работы - скорость печати. Определены управляющие воздействия. Полученные результаты могут быть использованы в дальнейших исследованиях для получения количественных зависимостей. The article discusses the possibilities of using 3D printers in the construction industry, highlights the advantages and disadvantages of the technologies used. The subject of research is the design features of 3D printers and the possibilities for their improvement. To do this, we used the methods of system analysis and decomposition. As a result, 3D printers are considered, and printing technology is chosen as the basis for improvement. The decomposition of technical characteristics of a 3D printer that directly affect the result of its operation - the speed of printing. Control actions are defined. The results obtained can be used in further research to obtain quantitative dependencies.

scholarly journals Flexible 3D Printed Molds for Educational Use. Digital Fabrication of 3D Typography

2019 ◽  
Vol 15 (13) ◽  
pp. 4 ◽  
Author(s):  
Alejandro Bonnet De León ◽  
Jose Luis Saorin ◽  
Jorge De la Torre-Cantero ◽  
Cecile Meier ◽  
María Cabrera-Pardo
Keyword(s):  
3D Modeling ◽  
Low Cost ◽  
Digital Fabrication ◽  
3D Printer ◽  
School Environments ◽  
Flexible Material ◽  
Educational Environments ◽  
3D Printers ◽  
3D Printed ◽  
The Subject

<p class="0abstract"><span lang="EN-US">One of the drawbacks of using 3D printers in educational environments is that the creation time of each piece is high and therefore it is difficult to manufacture at least one piece for each student. This aspect is important so that each student can feel part of the manufacturing process. To achieve this, 3D printers can be used, not to make pieces, but to make the molds that students use to create replicas. On the other hand, for a mold to be used to make several pieces, it is convenient to make it with flexible material. However, most used material for 3D printers (PLA) is very rigid. To solve this problem, this article designs a methodology that allows the use of low-cost 3D printers (most common in school environments) with flexible material so that each mold can be used to manufacture parts for several students. To print flexible material with low-cost printers, it is necessary to adapt the machine and the print parameters to work properly. This article analyzes the changes to be made with a low cost 3D printer and validates the use of molds in school environments. A pilot test has been carried out with 8 students of the subject of Typography, in the School of Art and Superior of Design of Tenerife. During the activity, the students carried out the process of designing a typography and creating digital molds for 3D printing with flexible material. The designs were made using free 3D modeling programs and low-cost technologies.</span></p>

scholarly journals PDHL-EDAS METHOD FOR MULTIPLE ATTRIBUTE GROUP DECISION MAKING AND ITS APPLICATION TO 3D PRINTER SELECTION

2021 ◽  
Vol 0 (0) ◽  
pp. 1-22
Author(s):  
Fan Lei ◽  
Guiwu Wei ◽  
Weijie Shen ◽  
Yanfeng Guo
Keyword(s):  
Decision Making ◽  
3D Printing ◽  
Group Decision Making ◽  
Group Decision ◽  
3D Printer ◽  
High Quality ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Multiple Attribute ◽  
3D Printers

With the rapid development of 3D printing technology, 3D printers are manufactured based on the principle of 3D printing technology are more and more widely used in the manufacturing industry. Choosing high quality 3D printers for industrial production is of great significance to the economic growth of enterprises. In fact, it is difficult to select the most optimal 3D printers under a single and simple standard. Therefore, this paper establishes the probabilistic double hierarchy linguistic EDAS (PDHL-EDAS) method for the multiple attribute group decision making (MAGDM). Then the CRITIC model is introduced to derive objective weight and the cumulative prospect theory is leaded into obtain the cumulative weight of PDHLTS. In addition, what’s more, the PDHL-EDAS method is built and applied to the choice of high-quality 3D printer. Finally, compared with the available MAGDM methods under PDHLTS, the built method is proved to be scientific and effective.

scholarly journals Can 3-D Printing Go Green?

2016 ◽  
Vol 138 (10) ◽  
pp. 42-47 ◽  
Author(s):  
R.P. Siegel
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Supply Chains ◽  
3D Printer ◽  
Vinyl Ethers ◽  
Fuel Use ◽  
Advantages And Disadvantages ◽  
Solid Objects ◽  
3D Printers

This article explores various advantages and disadvantages of 3D printing. As 3D printers have become smaller, less expensive, and easier to use, they have become increasingly popular. Additive manufacturing could make manufacturing more sustainable because it creates far less waste than traditional subtractive methods and because making products locally would shorten supply chains, reducing fuel use and carbon pollution from shipping. The researchers believe that 3D printing could ‘accelerate consumerism of nonbiodegradable throwaway plastic objects.’ Students have found that 3D printers use six common resin types: acrylates, thiols, alkenes, vinyl ethers, epoxides, and oxetanes. Acrylates, which the Ember printer uses, are the most common because they work well in a 3D printer and are considered safest for creating solid objects from liquids.

Offer of methods for minimizing key investment risks of “R-Pharm” JSC

2020 ◽  
Vol 17 (1) ◽  
pp. 58-67
Author(s):  
N. A. Kabanova ◽  
I. K. Alekseeva
Keyword(s):  
Strategic Planning ◽  
Pharmaceutical Company ◽  
Simulation Modeling ◽  
Return On Investment ◽  
System Analysis ◽  
Social Orientation ◽  
Pharmaceutical Companies ◽  
The Subject ◽  
High Degree

The article is devoted to the assessment of potential investment risks of the pharmaceutical company “R-Pharm” JSC with the aim of identifying the highest priority risks and developing methods for minimizing them. The relevance of the study is determined by the fact that the pharmaceutical business is characterized by a high degree of social orientation and annually invests $ 140 billion in the development of production and research, which determines the need for a risk-based approach to ensure the return on investment. The subject of this article is the investment risks of pharmaceutical companies, and the subject of research is the domestic pharmaceutical company “R-Pharm”. In order to assess the potential investment risks of “R-Pharm” JSC, the authors used elements of simulation modeling and system analysis. The proposed methods to minimize key investment risks are aimed at improving the efficiency of investment activities and is recommended as an element of the strategic planning of the company.

ICO as a Business Financing Tool: Myths and Reality

2018 ◽  
Vol 11 (2) ◽  
pp. 41-51 ◽  
Author(s):  
I. Ya. Lukasevich
Keyword(s):  
Corporate Finance ◽  
Digital Economy ◽  
Real Sector ◽  
The Real ◽  
Objective Information ◽  
Advantages And Disadvantages ◽  
Russian Economy ◽  
The Subject ◽  
Business Financing ◽  
Made In

The subject of the research is new tools for business financing using the initial coin offering (ICO) in the context of the development of cryptocurrencies and the blockchain technologies as their basis. The purpose of the work was to analyze the advantages and disadvantages of the ICO in comparison with traditional financial tools as well as prospects, limitations and problems of using digital financial tools. Conclusions are made in relation to possibilities, limitations and application areas of digital business financing tools, particularly in the real sector, taking into account the specifics of the Russian economy and legislation. It is shown that the main problems of using the digital financial tools are related to the economic sphere and caused by the lack of adequate approaches to evaluation of assets as well as the shortage of objective information. The problems and new tasks of corporate finance in the digital economy are defined.

scholarly journals A Novel Method for Precise Guided Hole Fabrication of Dental Implant Surgical Guide Fabricated with 3D Printing Technology

2020 ◽  
Vol 11 (1) ◽  
pp. 49
Author(s):  
Keunbada Son ◽  
Kyu-Bok Lee
Keyword(s):  
3D Printing ◽  
Dental Implant ◽  
Present Report ◽  
Free Software ◽  
3D Printer ◽  
Printing Technology ◽  
Surgical Guide ◽  
3 Dimensional ◽  
3D Printing Technology ◽  
Novel Method

A dental implant surgical guide fabricated by 3-dimensional (3D) printing technology is widely used in clinical practice due to its convenience and fast fabrication. However, the 3D printing technology produces an incorrect guide hole due to the shrinkage of the resin materials, and in order to solve this, the guide hole is adjusted using a trimmer or a metal sleeve is attached to the guide hole. These methods can lead to another inaccuracy. The present method reports a technique to compensate for a decreased guide hole caused by shrinkage that can occur when a computer-guided implant surgical guide is fabricated with a 3D printer. The present report describes a technique to adjust the size of the guide hole using a free software program to identify the optimized guide hole size that is fabricated with the 3D printer.

scholarly journals Foundation Piles—A New Feature for Concrete 3D Printers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2545
Author(s):  
Marcin Hoffmann ◽  
Krzysztof Żarkiewicz ◽  
Adam Zieliński ◽  
Szymon Skibicki ◽  
Łukasz Marchewka
Keyword(s):  
3D Printing ◽  
Rapid Development ◽  
Construction Materials ◽  
Shallow Foundation ◽  
Soil Reinforcement ◽  
3D Printer ◽  
Permanent Formwork ◽  
3D Printers ◽  
New Feature ◽  
The Cost

Foundation piles that are made by concrete 3D printers constitute a new alternative way of founding buildings constructed using incremental technology. We are currently observing very rapid development of incremental technology for the construction industry. The systems that are used for 3D printing with the application of construction materials make it possible to form permanent formwork for strip foundations, construct load-bearing walls and partition walls, and prefabricate elements, such as stairs, lintels, and ceilings. 3D printing systems do not offer soil reinforcement by making piles. The paper presents the possibility of making concrete foundation piles in laboratory conditions using a concrete 3D printer. The paper shows the tools and procedure for pile pumping. An experiment for measuring pile bearing capacity is described and an example of a pile deployment model under a foundation is described. The results of the tests and analytical calculations have shown that the displacement piles demonstrate less settlement when compared to the analysed shallow foundation. The authors indicate that it is possible to replace the shallow foundation with a series of piles combined with a printed wall without locally widening it. This type of foundation can be used for the foundation of low-rise buildings, such as detached houses. Estimated calculations have shown that the possibility of making foundation piles by a 3D printer will reduce the cost of making foundations by shortening the time of execution of works and reducing the consumption of construction materials.

Mainstreaming pre-manufactured offsite processes in construction – are we nearly there?

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Joseph Kwame Ofori-Kuragu ◽  
Robert Osei-Kyei
Keyword(s):  
Construction Industry ◽  
Relevant Literature ◽  
Future Research ◽  
Content Type ◽  
Technical Paper ◽  
Sustainable Systems ◽  
Technology Firms ◽  
Current State ◽  
Academic Publications ◽  
The Subject

Purpose The purpose of this paper is to explore the current state of popular modern methods of construction (MMC) and pre-manufactured construction in the construction industry and propose a framework for future implications for practice and future research. Design/methodology/approach This technical paper is based on a narrative review of the extant literature on the subject. First, the Scopus search engine was used to retrieve relevant papers on MMC, offsite and pre-manufactured construction. Second, institutional literature such as reports by industry professional and trade bodies, literature from leading technology firms and contractors with experience of MMC were extracted. These two strands of literature were synthesised and a comprehensive discussion on the topic was provided. Findings Results show that journal publications on MMC and pre-manufactured construction have increased in the past decade. The paper found significant advances in the development of premanufactured and offsite construction approaches with many benefits. Offsite and pre-manufactured construction are viable and sustainable systems currently suitable for wider adoption as the mainstream construction method. Research limitations/implications This technical paper based on an integrative review of relevant literature could have benefitted from interviews of professionals with experience of offsite and pre-manufacture techniques and from wider availability of current academic publications on the subject. Validation of the framework has not been undertaken. Originality/value Not much-published work has been undertaken on the current state of development globally and the viability of these construction approaches. This paper evaluates evidence from academic and industry sources to address this gap. A framework has been developed which can help the industry’s industrialisation drive.

Research on Applied-Information Technology with Application of Data Mining in Analysis of Consumer Behavior

2014 ◽  
Vol 1003 ◽  
pp. 230-234
Author(s):  
Feng Long Fan ◽  
Xu Li ◽  
Xu Sheng Yu ◽  
Li Wang
Keyword(s):  
Computer Technology ◽  
System Analysis ◽  
Computer Network ◽  
Rapid Development ◽  
Daily Consumption ◽  
School Students ◽  
Customer Data ◽  
Advantages And Disadvantages ◽  
Depth Analysis ◽  
Database Technology

With the development of computer technology, especially the rapid development and extensive application of database technology and computer network technology, the data quantity increases sharply, the accumulation of a large number of data in various fields, and rising fast. Enterprise database or data warehouse has stored a large number of customer data, these data include many aspects of the information of customers, but also contains the advantages and disadvantages of the enterprise operation. If we can use these data quickly, efficiently in-depth analysis and research, to find the rules and modes, to obtain the necessary knowledge from it, will help enterprises to better decision making. The system can successfully excavate students and staff of the tendency of consumption and consumption habits, analyze their satisfaction with each restaurant. The results of system analysis to a certain role for school students and teachers to understand and analyze the condition of daily consumption, so the establishment of this system has great practical value.

scholarly journals Implementing a 3D printing service in a biomedical library

2017 ◽  
Vol 105 (1) ◽  
Author(s):  
Verma Walker, MLIS
Keyword(s):  
Problem Solving ◽  
3D Printing ◽  
3D Modeling ◽  
Three Dimensional ◽  
National Institutes Of Health ◽  
3D Printer ◽  
Service Model ◽  
Steep Learning Curve ◽  
3D Printers ◽  
Creative Problem

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work.

Sign in / Sign up

Export Citation Format

Share Document