scholarly journals PERFORMING RELIABLE ABSORBANCE AND FLUORESCENCE MEASUREMENTS WITH LOW BUDGET – A TUTORIAL FOR BEGINNERS

Química Nova ◽  
2021 ◽  
Author(s):  
Diandra Barreto ◽  
Vanderli Leal ◽  
Josiele Conrado ◽  
Gabriel Fernandes ◽  
Caio Machado ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Low Cost ◽  
Research Groups ◽  
Light Emitting ◽  
Fluorescence Measurements ◽  
Large Spread ◽  
Huge Impact ◽  
Manufacturing Techniques ◽  
Public Politics ◽  
Interesting Alternative

Molecular absorbance and fluorescence measurements are usually performed by benchtop or portable USB spectrophotometers or fluorometers. However, even the simplest configuration of these instruments requires considerable financial input, which is not affordable to many universities and research groups especially when public politics withdraw funds from science. Light-emitting diodes (LEDs) based devices can be an interesting alternative for low-cost, portable yet reliable measurements of absorbance of fluorescence. Especially if associated with the fabrication of 3D structures by additive manufacturing techniques. Although there are many reviews in the literature dedicated to discussing the theoretical aspects and analytical performance of LED-based devices, we consider that these reviews are not easily applicable for beginners in electronics. It results in the intimidation to employ such powerful tools which could have a huge impact mainly to small and/or initial groups. In this tutorial, we present a guide that will help students and researchers to construct “lab-built” devices based on simple optoelectronic components and 3D printing to perform molecular absorbance and fluorescence measurements for analytical methods. Finally, with this tutorial guide, we anticipate a large spread of the usage of LED devices for reliable analytical measurements that can be extensively used in many scenarios.

scholarly journals Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1946 ◽  
Author(s):  
Héctor García-Martínez ◽  
Ernesto Ávila-Navarro ◽  
Germán Torregrosa-Penalva ◽  
Alberto Rodríguez-Martínez ◽  
Carolina Blanco-Angulo ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Microwave Frequency ◽  
Microwave Circuits ◽  
Fused Deposition ◽  
Microwave Electronic ◽  
Deposition Modeling ◽  
Manufacturing Techniques

This work presents a study on the implementation and manufacturing of low-cost microwave electronic circuits, made with additive manufacturing techniques using fused deposition modeling (FDM) technology. First, the manufacturing process of substrates with different filaments, using various options offered by additive techniques in the manufacture of 3D printing parts, is described. The implemented substrates are structurally analyzed by ultrasound techniques to verify the correct metallization and fabrication of the substrate, and the characterization of the electrical properties in the microwave frequency range of each filament is performed. Finally, standard and novel microwave filters in microstrip and stripline technology are implemented, making use of the possibilities offered by additive techniques in the manufacturing process. The designed devices were manufactured and measured with good results, which demonstrates the possibility of using low-cost 3D printers in the design process of planar microwave circuits.

Evaluation of Dimensional Accuracy of 3D printed mandibular model using two different Additive Manufacturing Techniques based on Cone Beam Computed Tomography scan data (A Diagnostic Accuracy Study)

2019 ◽  
Author(s):  
Noha Hamada Mohamed ◽  
Hossam Kandil ◽  
Iman Ismail Dakhli
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Low Cost ◽  
Dimensional Accuracy ◽  
3D Models ◽  
The Body ◽  
Reference Standard ◽  
Linear Measurements ◽  
3D Printed ◽  
Manufacturing Techniques

Abstract In dentistry, 3D printing already has diverse applicability, and holds a great deal of promise to make possible many new and exciting treatments and approaches to manufacturing dental restorations. Better availability, shorter processing time, and descending costs have resulted in the increased use of RP. Concomitantly the development of medical applications is expanding. (Zaharia et al., 2017)Many different printing technologies exist, each with their own advantages and disadvantages. Unfortunately, a common feature of the more functional and productive equipment is the high cost of the equipment, the materials, maintenance, and repair, often accompanied by a need for messy cleaning, difficult post-processing, and sometimes onerous health and safety concerns (Dawood et al., 2015)Low-cost 3D printers represent a great opportunity in the dental and medical field, as they could allow surgeons to use 3D models at a very low cost and, therefore, democratize the use of these 3D models in various indications. However, efforts should be made to establish a unified validation protocol for low-cost RP 3D printed models, including accuracy, reproducibility, and repeatability tests. Asaumi et al., suggested that dimensional changes may not affect the success of surgical applications if such changes are within a 2% variation .However, the proposed cut-off of 2% should be furthermore discussed, as the same accuracy may be not required for all types of indications. (Silva et al., 2008; Maschio et al., 2016)This aim of the present study is to evaluate the dimensional accuracy of the 3D printed mandibular models fabricated by two different additive manufacturing techniques, using highly precise one as selective laser sintering (SLS) and a low-cost one as fused filament fabrication and whether they are both comparable in terms of precision. In addition to evaluation of dimensional accuracy of linear measurements of the mandible in CBCT scans.7 mandibular models will be recruited. Radio-opaque markers of gutta-percha balls will be applied on the model to act as guide pointsTen linear measurements (5 long distances: Inter-condylar, inter-coronoidal, inter-mandibular notch, length of left ramus, length of right ramus; as well as 5 short distances: Length of the body of the mandible at midline, length of the body of the mandible in the area of last left molar, as well as that of the last right molar, the distance between the tip of right condyle to the tip of the right coronoid, as well as that of their left counterparts) will be obtained using digital calliper, to act as the reference standard later. Scanning of the model by CBCT will be next , 3D printing of the scanned image using SLS and FFF printers will be done. Recording of same linear measurment will be done on printed models. Comparison of the recorded values vs reference standard is the last step

scholarly journals Polymer-Based Additive Manufacturing: Process Optimisation for Low-Cost Industrial Robotics Manufacture

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2809
Author(s):  
Kartikeya Walia ◽  
Ahmed Khan ◽  
Philip Breedon
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Low Cost ◽  
Concept Development ◽  
Industrial Robots ◽  
Design Parameters ◽  
Initial Stage ◽  
Manufacturing Techniques ◽  
Robotics Design ◽  
Design Freedom

The robotics design process can be complex with potentially multiple design iterations. The use of 3D printing is ideal for rapid prototyping and has conventionally been utilised in concept development and for exploring different design parameters that are ultimately used to meet an intended application or routine. During the initial stage of a robot development, exploiting 3D printing can provide design freedom, customisation and sustainability and ultimately lead to direct cost benefits. Traditionally, robot specifications are selected on the basis of being able to deliver a specific task. However, a robot that can be specified by design parameters linked to a distinctive task can be developed quickly, inexpensively, and with little overall risk utilising a 3D printing process. Numerous factors are inevitably important for the design of industrial robots using polymer-based additive manufacturing. However, with an extensive range of new polymer-based additive manufacturing techniques and materials, these could provide significant benefits for future robotics design and development.

scholarly journals High-Temperature Mechanical Properties of IN718 Alloy: Comparison of Additive Manufactured and Wrought Samples

Crystals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 689
Author(s):  
Trunal Bhujangrao ◽  
Fernando Veiga ◽  
Alfredo Suárez ◽  
Edurne Iriondo ◽  
Franck Girot Mata
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Additive Manufacturing ◽  
Large Scale ◽  
Low Cost ◽  
Tensile Tests ◽  
High Deposition Rate ◽  
High Temperature Mechanical Properties ◽  
Manufacturing Techniques ◽  
Wire Arc Additive Manufacturing

Wire Arc Additive Manufacturing (WAAM) is one of the most appropriate additive manufacturing techniques for producing large-scale metal components with a high deposition rate and low cost. Recently, the manufacture of nickel-based alloy (IN718) using WAAM technology has received increased attention due to its wide application in industry. However, insufficient information is available on the mechanical properties of WAAM IN718 alloy, for example in high-temperature testing. In this paper, the mechanical properties of IN718 specimens manufactured by the WAAM technique have been investigated by tensile tests and hardness measurements. The specific comparison is also made with the wrought IN718 alloy, while the microstructure was assessed by scanning electron microscopy and X-ray diffraction analysis. Fractographic studies were carried out on the specimens to understand the fracture behavior. It was shown that the yield strength and hardness of WAAM IN718 alloy is higher than that of the wrought alloy IN718, while the ultimate tensile strength of the WAAM alloys is difficult to assess at lower temperatures. The microstructure analysis shows the presence of precipitates (laves phase) in WAAM IN718 alloy. Finally, the effect of precipitation on the mechanical properties of the WAAM IN718 alloy was discussed in detail.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Development of a 3D Printable and Highly Stretchable Ternary Organic-Inorganic Nanocomposite Hydrogel

2021 ◽  
Author(s):  
Chen Hu ◽  
Malik Haider ◽  
Lukas Hahn ◽  
Mengshi Yang ◽  
Robert Luxenhofer
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Nanocomposite Hydrogel ◽  
Highly Stretchable ◽  
Manufacturing Techniques ◽  
Advanced Applications

Hydrogels that can be processed with additive manufacturing techniques and concomitantly possess favorable mechanical properties are interesting for many advanced applications. However, the development of novel ink materials with high...

scholarly journals A Regenerative Business Model with Flexible, Modular and Scalable Processes in A Post-Covid Era: The Case of The Spinning Mesh Disc Reactor (SMDR)

2021 ◽  
Vol 13 (12) ◽  
pp. 6944
Author(s):  
Emma Anna Carolina Emanuelsson ◽  
Aurelie Charles ◽  
Parimala Shivaprasad
Keyword(s):  
Business Model ◽  
Low Cost ◽  
Sustainable Manufacturing ◽  
Sustainable Business ◽  
Capital Costs ◽  
Implementing Change ◽  
Chemical Manufacturing ◽  
Manufacturing Techniques ◽  
Flexible Operation

With stringent environmental regulations and a new drive for sustainable manufacturing, there is an unprecedented opportunity to incorporate novel manufacturing techniques. Recent political and pandemic events have shown the vulnerability to supply chains, highlighting the need for localised manufacturing capabilities to better respond flexibly to national demand. In this paper, we have used the spinning mesh disc reactor (SMDR) as a case study to demonstrate the path forward for manufacturing in the post-Covid world. The SMDR uses centrifugal force to allow the spread of thin film across the spinning disc which has a cloth with immobilised catalyst. The modularity of the design combined with the flexibility to perform a range of chemical reactions in a single equipment is an opportunity towards sustainable manufacturing. A global approach to market research allowed us to identify sectors within the chemical industry interested in novel reactor designs. The drivers for implementing change were identified as low capital cost, flexible operation and consistent product quality. Barriers include cost of change (regulatory and capital costs), limited technical awareness, safety concerns and lack of motivation towards change. Finally, applying the key features of a Sustainable Business Model (SBM) to SMDR, we show the strengths and opportunities for SMDR to align with an SBM allowing for a low-cost, sustainable and regenerative system of chemical manufacturing.

Influence of Specimen Layout on 17-4PH (AISI 630) Alloys Fabricated by Low-Cost Additive Manufacturing

2021 ◽  
Author(s):  
Chanun Suwanpreecha ◽  
Phanuphak Seensattayawong ◽  
Vorawat Vadhanakovint ◽  
Anchalee Manonukul
Keyword(s):  
Additive Manufacturing ◽  
Low Cost
Sign in / Sign up

Export Citation Format

Share Document