On-line measurements of settling characteristics in activated sludge

1997 ◽  
Vol 36 (4) ◽  
pp. 307-312
Author(s):  
Michael R. Rasmussen ◽  
Torben Larsen
Keyword(s):  
Activated Sludge ◽  
Settling Velocity ◽  
Continuous Measurement ◽  
Batch Reactor ◽  
Volume Index ◽  
Sludge Volume Index ◽  
Dynamic Variations ◽  
On Line ◽  
Settling Column ◽  
Settling Characteristics

An on-line settling column for measuring the dynamic variations of settling velocity of activated sludge has been developed. The settling column is automatic and self-cleansing insuring continuous and reliable measurements. The settling column was tested on sludge from a batch reactor where sucrose was added as an impulse to activated sludge. The continuous measurement of settling velocity revealed a highly dynamic response after the sucrose was added. The results were verified with simultaneous measurement of the initial settling rate. A 200 hour experiment showed variations in settling velocity, which was not apparent in the DSVI (Diluted Sludge Volume Index).

Settling Characteristics of Activated Sludge in Danish Treatment Plants with Biological Nutrient Removal

1994 ◽  
Vol 29 (7) ◽  
pp. 157-165 ◽  
Author(s):  
Gert Holm Kristensen ◽  
Per Elberg Jørgensen ◽  
Per Halkjær Nielsen
Keyword(s):  
Activated Sludge ◽  
Nutrient Removal ◽  
Volume Index ◽  
Biological Nutrient Removal ◽  
Sludge Volume Index ◽  
Filamentous Microorganisms ◽  
Best Parameter ◽  
One Year ◽  
Sludge Settling ◽  
Settling Characteristics

In 1989-91, a study was performed to investigate the settling characteristics of activated sludge in Danish treatment plants with biological nutrient removal. The study included three screening series on 38 treatment plants. Furthermore, the study included investigations during one year on seasonal variations in sludge settling characteristics at three treatment plants. The screening investigations were performed in November 1989 and May and September, 1990. Results showed that in the May-screening, 35-45% of the plants had a filament index of 2-2.5 or above, corresponding to a sludge volume index above 150 ml/g. When comparing data for diluted and non-diluted sludge volume indices, a SVI value of 150 ml/g seemed parallel to a DSVI of 110 ml/g. In the November- and September-screenings, some 30% of the plants had activated sludge showing a filament index in or above the critical area. Dominating filamentous microorganisms were found to be (in decreasing order): Microthrix parvicella, Type 0041, Type 021N, Type 0092, Type 0914, and Type 1851. A distinct variation over the year in sludge settling characteristics was found for the three plants. Sludge settling characteristics improved during summer, and deteriorated during winter. For activated sludge with a high content of filamentous microorganisms, the best parameter to follow the variations in sludge settling properties was the filament number. If the activated sludge concentration, the MLSS, varied significantly, the specific filament number was to be applied.

Comparison and evaluation of empirical zone settling velocity parameters based on sludge volume index using a unified settling characteristics database

2003 ◽  
Vol 37 (16) ◽  
pp. 3821-3836 ◽  
Author(s):  
Dimosthenis.L Giokas ◽  
Glen.T Daigger ◽  
Marcos.von Sperling ◽  
Youngchul Kim ◽  
Panayotis.A Paraskevas
Keyword(s):  
Settling Velocity ◽  
Volume Index ◽  
Sludge Volume Index ◽  
Settling Characteristics

scholarly journals PENGARUH CO-PRECIPITATION BESI KLORIDA TERHADAP KINERJA LUMPUR AKTIF PADA PROSES PENGOLAHAN AIR LIMBAH DOMESTIK SINTETIK

REAKTOR ◽  
2015 ◽  
Vol 15 (3) ◽  
pp. 182
Author(s):  
Dian Fatikha Aristiami ◽  
I Nyoman Widiasa
Keyword(s):  
Activated Sludge ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Suspended Solid ◽  
Volume Index ◽  
Sludge Volume Index ◽  
Mixed Liquor Suspended Solid ◽  
Effluent Quality ◽  
Co Precipitation ◽  
Settling Characteristics

The increase of population leads to an increase of the quantity of domestic wastewater. Activated sludge system is the most cost-efective to treat the domestic wastewater treatment. This study is aimed to evaluate the co-precipitation coagulant effect of FeCl3 on the growth of activated sludge, settling characteristics of the activated sludge, and effluent quality. sludge sedimentation characteristics (settling) as well as on the effluent quality. The activated sludge systems were operated in batch mode and synthetic domestic wastewaters with C:N:P ratio of 100:5:1 were used as feed wastewater. The growth of activated sludge was based on concentration of Mixed Liquor Suspended Solid (MLSS), settling characteristics of activated sludge was based on value of Sludge Volume Index (SVI), and effluent quality was based on turbidity, colour, N-ammonia concentration, and Chemical Oxygen Demand content. Results indicate that inhibition effect of FeCl3 to activated sludge activity was not significant at dosage ≤ 30 mg/L. Good settling characterisic (SVI 70-150 mg/L) was achieved at dosage of 20-30 mg/L. Finally, the best effluent quality, i.e. turbidity (9.4), colour (96), amonia removal (83.6%), and COD removal (72.97%), at dosage of 30 mg/L. Keywords: activated sludge; co-precipitation; domestic wastewater; wastewater treatment Abstrak Peningkatan jumlah penduduk mengakibatkan kenaikan jumlah air limbah domestik. Sistem lumpur aktif merupakan proses yang paling efektif untuk mengolah air limbah domestik. Penelitian ini bertujuan untuk mengevaluasi pengaruh co-precipitation koagulan FeCl3 terhadap pertumbuhan lumpur aktif, karakteristik pengendapan lumpur aktif, dan kualitas efluen. Sistem lumpur aktif dioperasikan secara curah dan umpan air limbah yang digunakan adalah air limbah domestik sintesis dengan rasio C:N:P = 100:5:1. Pertumbuhan lumpur aktif  berdasarkan konsentrasi Mixed Liquor Suspended Solid (MLSS), karakteristik pengendapan lumpur berdasarkan  nilai Sludge Volume Index (SVI), dan kualitas efluen berdasarkan tingkat kekeruhan, warna, kadar N-amonia dan kadar Chemical Oxygen Demand (COD). Hasil penelitian menunjukkan bahwa inhibisi FeCl3 terhadap aktivitas lumpur aktif tidak signifikan pada dosis ≤ 30 mg/L. Karakteristik pengendapan yang baik (SVI 70-150 mg/L) tercapai pada dosis 20-30 mg/L. Kualitas efluen terbaik, yaitu  kekeruhan (9,4),  warna (96), penyisihan amonia (83,6%) dan penyisihan COD (72,97%), pada dosis 30 mg/L. Kata kunci: lumpur aktif; co-precipitation; air limbah domestik; pengolahan air limbah  

Automated monitoring of activated sludge in a pilot plant using image analysis

2001 ◽  
Vol 43 (7) ◽  
pp. 91-96 ◽  
Author(s):  
M. da Motta ◽  
M. N. Pons ◽  
N. Roche
Keyword(s):  
Image Analysis ◽  
Wastewater Treatment ◽  
Activated Sludge ◽  
Size Distribution ◽  
Wastewater Treatment Plant ◽  
Pilot Plant ◽  
Settling Velocity ◽  
Treatment Plant ◽  
Volume Index ◽  
Sludge Volume Index

An automated procedure for the characterisation by image analysis of the morphology of activated sludge has been used to monitor the biomass in a pilot wastewater treatment plant, in complement to the usual settleability (sludge volume index, settling velocity) and size distribution (by laser granulometry) measurements.

Effects of sludge settling characteristics in the BNR system

2000 ◽  
Vol 42 (3-4) ◽  
pp. 283-288 ◽  
Author(s):  
Z. Yun ◽  
W. Yo ◽  
Y. Yi ◽  
S. Choi ◽  
E. Choi ◽  
...  
Keyword(s):  
Settling Tank ◽  
Volume Index ◽  
Anoxic Zone ◽  
Sludge Volume Index ◽  
Analytical Accuracy ◽  
Fast Settling ◽  
Sludge Settling ◽  
Extracellular Polymer ◽  
Sludge Settleability ◽  
Settling Characteristics

Although the BNR system design assumes no sludge settling problems in the final settling tank, the fluctuation of daily loading and up to 40% of anaerobiosis in the BNR system would be considerable factors in determining the sludge settleability. The sludge volume index (SVI) is a classical parameter to examine the sludge settleability but it has a limited value to evaluate the overall settling characteristics. The extracellular polymer (ECP) content in sludge has long been considered as an indicator of biological flocculation in activated sludge process, but the skepticism on analytical accuracy limits the usage in settling study. This study focused on evaluating the BNR system performance related to the sludge settling characteristics under the controlled laboratory environment. A 5-stage BNR system (anaerobic-anoxic-3 stage oxic) was operated with the HRTs from 3.9 to 7.6 hours. In order to determine the sludge settling properties, both SVI and ECP content were monitored. The ECP contents in the sludge sample were measured by the slime-washing step followed by high-G centrifugation and sonication. The gel-electrophoresis was used to detect the DNA in the sonicated samples to determine the intracellular polymer contamination. It has been found that the anaerobiosis in the anaerobic and anoxic zone that consisted of 37% of reactor volume could not deteriorate the sludge settling properties even at the HRT of 3.9 hours. The SVI values of sludge taken from the reactor with the HRT of 7.2 hours averaged to less than 50 mL/gr. It was postulated that a fast settling sludge in the BNR system could not always ensure production of clear effluent. The sludge with very low SVI might not achieve a complete biological flocculation potential. In addition, the degree of denitrification in the BNR system could be related to the sludge settleability.

Impact of septic compounds and operational conditions on the microbiology of an activated sludge system

2007 ◽  
Vol 55 (6) ◽  
pp. 135-142 ◽  
Author(s):  
Carl Pelletier ◽  
Mary Ann Fitzsimmons ◽  
Sophie Deschênes ◽  
Michael Paice
Keyword(s):  
Activated Sludge ◽  
Digital Imaging ◽  
Volume Index ◽  
Operating Parameters ◽  
Sludge Volume Index ◽  
Sulphur Compounds ◽  
Operational Conditions ◽  
Volatile Organic ◽  
Volatile Organic Acids ◽  
Reduced Sulphur Compounds

In activated sludge (AS) biotreatment, septic compounds such as volatile organic acids and reduced sulphur compounds have been frequently cited as a major cause of Thiothrix and Type 021N filamentous bulking. These filaments are common in Canadian pulp and paper biotreatment systems, where they cause settling problems in secondary clarifiers. We conducted a 14-week study of a TMP/newsprint mill effluent to characterize the septic compounds entering the biotreatment, and to determine correlations with AS biomass characteristics and biotreatment operating parameters. A significant correlation was found between the sludge volume index, the abundance of Type 021N, and the propionic acid (PA) concentration in the primary clarified effluent. PA also induced a significant change in the flocculating bacteria size distribution determined by digital imaging. Consequently, the correlation observed between PA and Type 021N bulking is an indirect effect of inhibition of floc-forming microorganisms, giving a competitive advantage to filaments.

Occurrence of Microthrix parvicella in sequencing batch reactors

2014 ◽  
Vol 69 (10) ◽  
pp. 1984-1995 ◽  
Author(s):  
Lana Mallouhi ◽  
Ute Austermann-Haun
Keyword(s):  
Activated Sludge ◽  
Municipal Wastewater ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Volume Index ◽  
Batch Reactors ◽  
Sequencing Batch Reactors ◽  
Municipal Wastewater Treatment ◽  
Nitrogen And Phosphorus ◽  
Microthrix Parvicella

Sequencing batch reactors (SBRs) are known for high process stability and usually have a good sludge volume index (SVI). Nevertheless, in many SBRs in Germany for municipal wastewater treatment, scum and foam problems can occur, and SVI can be larger than 200 mL/g. The microscopic investigations of the activated sludge from plants with nitrogen and phosphorus removal have shown that Microthrix parvicella is dominant in the activated sludge in most of them. Studies showed that the optimum growth of M. parvicella is performed at a high sludge age (>20 d) and low sludge load in the range of 0.05–0.2 kg of biochemical oxygen demand per kg of total suspended solids per day (kg BOD5/(TSS·d)). The investigations in 13 SBRs with simultaneous aerobic sludge stabilization (most of them are operated with a system called differential internal cycle strategy sequential batch reactor (DIC-SBR)) show that M. parvicella is able to grow in sludge loads less than 0.05 kg BOD5/(kg TSS·d) as well. To optimize the operation of those SBRs, long cycle times (8–12 h) and dosing of iron salts to eliminate long-chain fatty acids are both recommended. This leads to better SVI and keeps M. parvicella at a low frequency.

Estimation of suspended solids concentrations in activated sludge settling tanks

1997 ◽  
Vol 35 (8) ◽  
pp. 127-135 ◽  
Author(s):  
Youngchul Kim ◽  
Wesley O. Pipes ◽  
Paul-Gene Chung
Keyword(s):  
Activated Sludge ◽  
Suspended Solids ◽  
Marked Effect ◽  
Treatment Plant ◽  
Accurate Method ◽  
Volume Index ◽  
Sludge Volume Index ◽  
Solids Concentration ◽  
Exponential Decrease ◽  
Sludge Settling

This is a report of a field study based on data from an activated sludge process in a wastewater treatment plant in Chester, Pennsylvania, USA. The objective was to develop an accurate method for estimation of the average suspended solids concentration (SSB) of the layer of sludge in the settling tanks (the “sludge blanket”). Plant operators estimated SSB by averaging the mixed liquor suspended solids (Sm) and the return sludge suspended solids (Su) concentrations. Measurement of SSB showed that averaging Sm and Su frequently overestimated SSB by a large amount. A different relationship between SSB and parameters which are normally measured for operational purposes was developed. The parameters are Su, the overflow rates and data from the sludge volume index (SVI) measurement. It was found that an increasing overflow rate will result in an exponential decrease in the ratio of SSB to Su. Also, the SVI has a marked effect on the ratio of SSB to Su and thus on the amount of suspended solids which can be stored in the settling tanks. The proposed estimation equation was found to be statistically superior to estimation by averaging the Sm and Su.

Prediction of sludge volume index bulking using image analysis and neural network at a full-scale activated sludge plant

2015 ◽  
Vol 57 (37) ◽  
pp. 17195-17205 ◽  
Author(s):  
Halime Boztoprak ◽  
Yüksel Özbay ◽  
Dünyamin Güçlü ◽  
Murat Küçükhemek
Keyword(s):  
Neural Network ◽  
Image Analysis ◽  
Activated Sludge ◽  
Full Scale ◽  
Volume Index ◽  
Sludge Volume Index

scholarly journals The sequencing batch reactor as an excellent configuration to treat wastewater from the petrochemical industry

2016 ◽  
Vol 75 (4) ◽  
pp. 793-801 ◽  
Author(s):  
Michel Caluwé ◽  
Dominique Daens ◽  
Ronny Blust ◽  
Luc Geuens ◽  
Jan Dries
Keyword(s):  
Activated Sludge ◽  
Petrochemical Industry ◽  
Treatment Time ◽  
Batch Reactor ◽  
Negative Influence ◽  
Volume Index ◽  
Feeding Pattern ◽  
Aerobic Granular Sludge ◽  
Organic Loading Rate ◽  
Adaptation Period

In the present study, the influence of a changing feeding pattern from continuous to pulse feeding on the characteristics of activated sludge was investigated with a wastewater from the petrochemical industry from the harbour of Antwerp. Continuous seed sludge, adapted to the industrial wastewater, was used to start up three laboratory-scale sequencing batch reactors. After an adaptation period from the shift to pulse feeding, the effect of an increasing organic loading rate (OLR) and volume exchange ratio (VER) were investigated one after another. Remarkable changes of the specific oxygen uptake rate (sOUR), microscopic structure, sludge volume index (SVI), SVI30/SVI5 ratio, and settling rate were observed during adaptation. sOUR increased two to five times and treatment time decreased 43.9% in 15 days. Stabilization of the SVI occurred after a period of 20 days and improved significantly from 300 mL·g−1 to 80 mL·g−1. Triplication of the OLR and VER had no negative influence on sludge settling and effluent quality. Adaptation time of the microorganisms to a new feeding pattern, OLR and VER was relatively short and sludge characteristics related to aerobic granular sludge were obtained. This study indicates significant potential of the batch activated sludge system for the treatment of this industrial petrochemical wastewater.

Sign in / Sign up

Export Citation Format

Share Document