A novel solution for hydroxylated PAHs removal by oxidative coupling reaction using Mn oxide

2008 ◽  
Vol 58 (1) ◽  
pp. 171-178 ◽  
Author(s):  
Ki-Hoon Kang ◽  
Dong-Min Lim ◽  
Hyun-Sang Shin
Keyword(s):  
Rate Constants ◽  
Oxidative Coupling ◽  
Coupling Reaction ◽  
Experimental Conditions ◽  
Oxidative Transformation ◽  
First Order ◽  
Oxidative Coupling Reaction ◽  
Order Rate ◽  
Mn Oxide ◽  
Pseudo First Order

In this study, removals of 1-naphthol by oxidative-coupling reaction using birnessite, one of the natural Mn oxides present in soil, was investigated in various experimental conditions (reaction time, Mn oxide loadings, pH). The removal efficiency of 1-naphthol by birnessite was high in all the experimental conditions, and UV-visible and mass spectrometric analyses on the supernatant after reaction confirmed that the reaction products were oligomers formed by oxidative-coupling reaction. Pseudo-first order rate constants, k, for the oxidative transformation of 1-naphthol by birnessite was derived from the kinetic experiments under various amounts of birnessite loadings, and using the observed pseudo-first order rate constants with respect to birnessite loadings, the surface area normalised specific rate constant, ksurf, was also determined to be 9.3 × 10−4 (L/m2·min) for 1-naphthol. In addition, the oxidative transformation of 1-naphthol was found to be dependent on solution pH, and the pseudo-first order rate constants were increased from 0.129 at pH 10 to 0.187 at pH 4.

A kinetic standard for precise calibration of spectrophotometer cell temperature.

1981 ◽  
Vol 27 (5) ◽  
pp. 753-755 ◽  
Author(s):  
P A Adams ◽  
M C Berman
Keyword(s):  
Temperature Dependence ◽  
Rate Constants ◽  
Cell Temperature ◽  
First Order ◽  
Order Rate ◽  
Acid Catalyzed ◽  
Pseudo First Order ◽  
Hydrolysis Of

Abstract We describe a simple, highly reproducible kinetic technique for precisely measuring temperature in spectrophotometric systems having reaction cells that are inaccessible to conventional temperature probes. The method is based on the temperature dependence of pseudo-first-order rate constants for the acid-catalyzed hydrolysis of N-o-tolyl-D-glucosylamine. Temperatures of reaction cuvette contents are measured with a precision of +/- 0.05 degrees C (1 SD).

The mercury(II)-induced aquation of trans-Chloroamminebis(dimethylglyoximato)cobalt(III) complex

1975 ◽  
Vol 28 (5) ◽  
pp. 1133 ◽  
Author(s):  
S Chan ◽  
S Tan
Keyword(s):  
Rate Constants ◽  
Aqueous Ethanol ◽  
Association Constants ◽  
First Order ◽  
Order Rate ◽  
Leaving Group ◽  
Pseudo First Order ◽  
Activated Complex

The pseudo first-order rate constants for the mercury(II)-induced aquation of trans-[Co(Hdmg)2(NH3)Cl] (Hdmg = dimethylglyoximate ion) have been measured in aqueous and aqueous ethanol solutions (ethanol- water mole ratio 1 : 5.1) containing various excess amounts of mercury(II)ion at 273.2 K. Association constants of the complex formed with mercury(II) ion and rate constants for dissociation of the activated complex in both solutions have been calculated. The kinetic results are discussed in terms of formation of an activated complex Co-C1-Hg, followed by a simple rate-determining aquation in which HgCl+ acts as the leaving group.

scholarly journals Kinetic Evidence for Near Irreversible Nonionic Micellar Entrapment ofN-(2′-Methoxyphenyl)phthalimide (1) under the Typical Alkaline Reaction Conditions

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
M. Niyaz Khan ◽  
Yoke-Leng Sim ◽  
Azhar Ariffin
Keyword(s):  
Kinetic Analysis ◽  
Alkaline Hydrolysis ◽  
Rate Constants ◽  
Total Concentration ◽  
Reaction Conditions ◽  
First Order ◽  
Order Rate ◽  
Alkaline Reaction ◽  
Pseudo First Order ◽  
Hydrolysis Of

The values of pseudo-first-order rate constants (kobs) for alkaline hydrolysis of1, obtained at 1.0 mM NaOH and withinCmEnT(total concentration ofCmEn) range of 3.0–5.0 mM forC12E23and 10–20 mM forC18E20, fail to obey pseudophase micellar (PM) model. The values of the fraction of near irreversibleCmEnmicellar trapped1molecules (FIT1) vary in the range ~0–0.75 forC12E23and ~0–0.83 forC18E20under such conditions. The values ofFIT1become 1.0 at ≥10 mMC12E23and 50 mMC18E20. Kinetic analysis of the observed data at ≥10 mMC12E23shows near irreversible micellar entrapment of1molecules under such conditions.

Degradation of propoxycarbazone-sodium with advanced oxidation processes

2011 ◽  
Vol 11 (1) ◽  
pp. 129-134 ◽  
Author(s):  
A. Dulov ◽  
N. Dulova ◽  
Y. Veressinina ◽  
M. Trapido
Keyword(s):  
Rate Constants ◽  
Advanced Oxidation Processes ◽  
Advanced Oxidation ◽  
Fenton Process ◽  
Oxidation Processes ◽  
First Order ◽  
Order Rate ◽  
Conversion Time ◽  
Pseudo First Order ◽  
Kinetics Of

The degradation of propoxycarbazone-sodium, an active component of commercial herbicide, in aqueous solution with ozone, UV photolysis and advanced oxidation processes: O3/UV, O3/UV/H2O2, H2O2/UV, and the Fenton process was studied. All these methods of degradation proved feasible. The kinetics of propoxycarbazone-sodium degradation in water followed the pseudo-first order equation for all studied processes except the Fenton treatment. The application of schemes with ozone demonstrated low pseudo-first order rate constants within the range of 10−4 s−1. Addition of UV radiation to the processes improved the removal of propoxycarbazone-sodium and increased the pseudo-first order rate constants to 10−3 s−1. The Fenton process was the most efficient and resulted in 5 and 60 s of half-life and 90% conversion time of propoxycarbazone-sodium, respectively, at 14 mM H2O2 concentration. UV treatment and the Fenton process may be recommended for practical application in decontamination of water or wastewater.

scholarly journals Removal of Emerging Contaminants in Wastewater by Sonolysis, Photocatalysis and Ozonation

2018 ◽  
Vol 21 (2) ◽  
pp. 98-105 ◽  
Keyword(s):  
Rate Constants ◽  
Photocatalytic Oxidation ◽  
Advanced Oxidation Processes ◽  
Emerging Contaminants ◽  
Removal Rate ◽  
Experimental Conditions ◽  
Oxidation Processes ◽  
First Order ◽  
Performance Variation ◽  
Pseudo First Order

<p>Three different advanced oxidation processes (AOPs) were applied to investigate the removal of emerging contaminants (ECs) i.e. sulfamethoxazole (SMX), diclofenac (DCF) and carbamazepine (CBZ) in synthetically prepared solutions. The degradation of these substances was carried out by ozonation, sonolysis and photocatalytic oxidation, as well as by different combinations of these processes. The objectives of this work were to evaluate the removal efficiency in each AOP and to assess the performance variation of sonolysis in combination with other AOPs. The best performances were achieved by sonocatalysis, which resulted in the removal of the selected pharmaceuticals in the range between 37% and 47%. Under similar experimental conditions, the removal of the selected ECs by single compounds by ozonation was slightly lower than the removal of respective compounds in the mixture. Moreover, pseudo first-order removal rate constants of photocatalytic mineralization were determined as 9.33×10-2, 4.90×10-3, 1.06×10-2 min-1 for SMX, DCF and CBZ, respectively.</p>

Assessing the fate and biodegradation of cyanobacterial metabolites in Australian waters

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Tim Tang ◽  
Daniel Hoefel ◽  
Thorsten Mosisch ◽  
Lionel Ho
Keyword(s):  
Seasonal Variations ◽  
Rate Constants ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order

With the exception of the saxitoxins, the cyanobacterial metabolites studied were shown to be biodegradable in two South Australian waters with the rate of biodegradation of the metabolites influenced by temperature and to a lesser extent, seasonal variations. The order of ease of biodegradability followed the trend: microcystin-LR &gt; cylindrospermopsin &gt; geosmin &gt; 2-methylisoborneol &gt; saxitoxins. Pseudo-first-order rate constants for the biodegradation of the metabolites ranged from 9.6 × 10−4 to 2.6 × 10−2 h−1.

scholarly journals Double Proton Tautomerism via Intra- or Intermolecular Pathways? The Case of Tetramethyl Reductic Acid Studied by Dynamic NMR: Hydrogen Bond Association, Solvent and Kinetic H/D Isotope Effects

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4373
Author(s):  
Hans-Heinrich Limbach ◽  
Simone Baumgärtner ◽  
Roland Franke ◽  
Ferdinand Männle ◽  
Gerd Scherer ◽  
...  
Keyword(s):  
Rate Constants ◽  
Chemical Shifts ◽  
Isotope Effects ◽  
Intrinsic Rate ◽  
Tunneling Model ◽  
Oh Groups ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Hydrogen Bonded

Using dynamic liquid-state NMR spectroscopy a degenerate double proton tautomerism was detected in tetramethyl reductic acid (TMRA) dissolved in toluene-d8 and in CD2Cl2. Similar to vitamin C, TMRA belongs to the class of reductones of biologically important compounds. The tautomerism involves an intramolecular HH transfer that interconverts the peripheric and the central positions of the two OH groups. It is slow in the NMR time scale around 200 K and fast at room temperature. Pseudo-first-order rate constants of the HH transfer and of the HD transfer after suitable deuteration were obtained by line shape analyses. Interestingly, the chemical shifts were found to be temperature dependent carrying information about an equilibrium between a hydrogen bonded dimer and a monomer forming two weak intramolecular hydrogen bonds. The structures of the monomer and the dimer are discussed. The latter may consist of several rapidly interconverting hydrogen-bonded associates. A way was found to obtain the enthalpies and entropies of dissociation, which allowed us to convert the pseudo-first-order rate constants of the reaction mixture into first-order rate constants of the tautomerization of the monomer. Surprisingly, these intrinsic rate constants were the same for toluene-d8 and CD2Cl2, but in the latter solvent more monomer is formed. This finding is attributed to the dipole moment of the TMRA monomer, compensated in the dimer, and to the larger dielectric constant of CD2Cl2. Within the margin of error, the kinetic HH/HD isotope effects were found to be of the order of 3 but independent of temperature. That finding indicates a stepwise HH transfer involving a tunnel mechanism along a double barrier pathway. The Arrhenius curves were described in terms of the Bell–Limbach tunneling model.

Elucidation of the Nucleophilic Potential of Diazocyclopentadiene

Synthesis ◽  
2022 ◽  
Author(s):  
Herbert Mayr ◽  
Manfred Hartnagel ◽  
Armin R. Ofial
Keyword(s):  
Rate Constants ◽  
Second Order ◽  
Order Conditions ◽  
First Order ◽  
Electrophilic Substitutions ◽  
Order Rate ◽  
Nucleophilic Reactivity ◽  
Pseudo First Order

AbstractDiazocyclopentadiene reacts with benzhydrylium ions (Ar2CH+) to give 2,5-dibenzhydryl-substituted diazocyclopentadienes. The kinetics have been determined photometrically in dichloromethane under pseudo-first-order conditions using diazocyclopentadiene in excess. Plots of the second-order rate constants (log k 2) versus the electrophilicity parameters E of the benzhydrylium ions gave the nucleo­philicity parameter N = 4.84 and susceptibility s N = 1.06 for diazo­cyclopentadiene according to the correlation log k(20 °C) = s N(E + N). Diazocyclopentadiene thus has a similar nucleophilic reactivity as pyrrole. Previously reported electrophilic substitutions of diazocyclopentadiene are rationalized by these parameters and new reaction possibilities are predicted.

Sign in / Sign up

Export Citation Format

Share Document