EFFECTS OF TEMPERATURE ON ELASTIC STIFFNESS OF A HDPE GEOGRID AND ITS MODEL SIMULATION

2017 ◽  
Author(s):  
Warat Kongkitkul
Keyword(s):  
Model Simulation ◽  
Elastic Stiffness ◽  
Effects Of Temperature

scholarly journals An Experimental and Theoretical Study of Impact of Device Parameters on Performance of AlN/Sapphire-Based SAW Temperature Sensors

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 40
Author(s):  
Hongrui Lv ◽  
Yinglong Huang ◽  
Yujie Ai ◽  
Zhe Liu ◽  
Defeng Lin ◽  
...  
Keyword(s):  
Electromechanical Coupling ◽  
Model Simulation ◽  
Acoustic Propagation ◽  
Elastic Stiffness ◽  
Temperature Sensors ◽  
Propagation Direction ◽  
Electromechanical Coupling Coefficient ◽  
Aln Film ◽  
Quality Factor Q ◽  
The Impact

The impact of device parameters, including AlN film thickness (hAlN), number of interdigital transducers (NIDT), and acoustic propagation direction, on the performance of c-plane AlN/sapphire-based SAW temperature sensors with an acoustic wavelength (λ) of 8 μm, was investigated. The results showed that resonant frequency (fr) decreased linearly, the quality factor (Q) decreased and the electromechanical coupling coefficient (Kt2) increased for all the sensors with temperature increasing from −50 to 250 °C. The temperature coefficients of frequency (TCFs) of sensors on AlN films with thicknesses of 0.8 and 1.2 μm were −65.57 and −62.49 ppm/°C, respectively, indicating that a reduction in hAlN/λ favored the improvement of TCF. The acoustic propagation direction and NIDT did not obviously impact the TCF of sensors, but they significantly influenced the Q and Kt2 of the sensors. At all temperatures measured, sensors along the a-direction exhibited higher fr, Q and Kt2 than those along the m-direction, and sensors with NIDT of 300 showed higher Q and Kt2 values than those with NIDT of 100 and 180. Moreover, the elastic stiffness of AlN was extracted by fitting coupling of modes (COM) model simulation to the experimental results of sensors along different directions considering Euler transformation of material parameter-tensors. The higher fr of the sensor along the a-direction than that along the m-direction can be attributed to its larger elastic stiffness c11, c22, c44, and c55 values.

Effects of temperature on the rupture strength and elastic stiffness of geogrids

2012 ◽  
Vol 19 (2) ◽  
pp. 106-123 ◽  
Author(s):  
W. Kongkitkul ◽  
W. Tabsombut ◽  
C. Jaturapitakkul ◽  
F. Tatsuoka
Keyword(s):  
Rupture Strength ◽  
Elastic Stiffness ◽  
Effects Of Temperature

Model, simulation and experiments for a Buoyancy Organic Rankine Cycle

2020 ◽  
Vol 92 (1) ◽  
pp. 10906
Author(s):  
Jeroen Schoenmaker ◽  
Pâmella Gonçalves Martins ◽  
Guilherme Corsi Miranda da Silva ◽  
Julio Carlos Teixeira
Keyword(s):  
Model Simulation ◽  
Organic Rankine Cycle ◽  
Thermodynamic Cycle ◽  
Rankine Cycle ◽  
Test Body ◽  
Working Fluid ◽  
Proof Of Concept ◽  
Energy Scenario ◽  
New Type ◽  
Fluid Reservoir

Organic Rankine Cycle (ORC) systems are increasingly gaining relevance in the renewable and sustainable energy scenario. Recently our research group published a manuscript identifying a new type of thermodynamic cycle entitled Buoyancy Organic Rankine Cycle (BORC) [J. Schoenmaker, J.F.Q. Rey, K.R. Pirota, Renew. Energy 36, 999 (2011)]. In this work we present two main contributions. First, we propose a refined thermodynamic model for BORC systems accounting for the specific heat of the working fluid. Considering the refined model, the efficiencies for Pentane and Dichloromethane at temperatures up to 100 °C were estimated to be 17.2%. Second, we show a proof of concept BORC system using a 3 m tall, 0.062 m diameter polycarbonate tube as a column-fluid reservoir. We used water as a column fluid. The thermal stability and uniformity throughout the tube has been carefully simulated and verified experimentally. After the thermal parameters of the water column have been fully characterized, we developed a test body to allow an adequate assessment of the BORC-system's efficiency. We obtained 0.84% efficiency for 43.8 °C working temperature. This corresponds to 35% of the Carnot efficiency calculated for the same temperature difference. Limitations of the model and the apparatus are put into perspective, pointing directions for further developments of BORC systems.

Effects of temperature on life history set the sensitivity to fishing in Atlantic cod Gadus morhua

2014 ◽  
Vol 514 ◽  
pp. 217-229 ◽  
Author(s):  
HY Wang ◽  
LW Botsford ◽  
JW White ◽  
MJ Fogarty ◽  
F Juanes ◽  
...  
Keyword(s):  
Life History ◽  
Gadus Morhua ◽  
Atlantic Cod ◽  
Effects Of Temperature

Relationships between temperature and Pacific hake distribution vary across latitude and life-history stage

2020 ◽  
Vol 639 ◽  
pp. 185-197 ◽  
Author(s):  
MJ Malick ◽  
ME Hunsicker ◽  
MA Haltuch ◽  
SL Parker-Stetter ◽  
AM Berger ◽  
...  
Keyword(s):  
Life History ◽  
Environmental Effects ◽  
Environmental Conditions ◽  
Vancouver Island ◽  
Additive Models ◽  
Life History Stage ◽  
Fish Stocks ◽  
Merluccius Productus ◽  
Multiple Dimensions ◽  
Effects Of Temperature

Environmental conditions can have spatially complex effects on the dynamics of marine fish stocks that change across life-history stages. Yet the potential for non-stationary environmental effects across multiple dimensions, e.g. space and ontogeny, are rarely considered. In this study, we examined the evidence for spatial and ontogenetic non-stationary temperature effects on Pacific hake Merluccius productus biomass along the west coast of North America. Specifically, we used Bayesian additive models to estimate the effects of temperature on Pacific hake biomass distribution and whether the effects change across space or life-history stage. We found latitudinal differences in the effects of temperature on mature Pacific hake distribution (i.e. age 3 and older); warmer than average subsurface temperatures were associated with higher biomass north of Vancouver Island, but lower biomass offshore of Washington and southern Vancouver Island. In contrast, immature Pacific hake distribution (i.e. age 2) was better explained by a nonlinear temperature effect; cooler than average temperatures were associated with higher biomass coastwide. Together, our results suggest that Pacific hake distribution is driven by interactions between age composition and environmental conditions and highlight the importance of accounting for varying environmental effects across multiple dimensions.

Effect of temperature during the synthesis process of CdSe nanoparticles using the colloidal technique

MRS Advances ◽  
2020 ◽  
Vol 5 (63) ◽  
pp. 3389-3395
Author(s):  
R. González-Díaz ◽  
D. Fernández-Sánchez ◽  
P. Rosendo-Francisco ◽  
G. Sánchez-Legorreta
Keyword(s):  
Scanning Tunneling Microscope ◽  
Electron Cloud ◽  
Cdse Nanoparticles ◽  
Effect Of Temperature ◽  
Synthesis Process ◽  
Scanning Tunneling ◽  
Tunneling Microscope ◽  
First Results ◽  
Effects Of Temperature ◽  
Scanning Electron

AbstractIn this work, the first results of the effects of temperature during the production of Se2- ions and the effect during the interaction of Cd2+ and Se2- ions in the synthesis process of CdSe nanoparticles are presented. The synthesis of CdSe was carried out by the colloidal technique, in the first one we used a temperature of 63 °C to produce Se2- ions and in the second one an interaction temperature of 49 °C. The samples were characterized using a Scanning Electron Microscope (SEM) and a Scanning Tunneling Microscope (STM). From the SEM micrographs it was possible to identify the thorns formation and irregular islands. STM micrographs reveal elliptical shapes with a regular electron cloud profile.

Sign in / Sign up

Export Citation Format

Share Document