Development and Characterization of a Clobetasol Propionate Nanostructured Lipid Carrier-based Gel for the Treatment of Plaque Psoriasis

2020 ◽  
Vol 13 ◽  
Author(s):  
Ankita Dadwal ◽  
Neeraj Mishra ◽  
Raj Kumar Narang
Keyword(s):  
Skin Permeation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Homogenization Method ◽  
Clobetasol Propionate ◽  
In Vivo Studies ◽  
Nanostructured Lipid Carrier ◽  
Safe Delivery

Background: Psoriasis is an autoimmune disease of the skin with lapsing episodes of hyperkeratosis, irritation, and inflammation. Numerous traditional and novel drug delivery systems have been used for better penetration through psoriatic barrier cells and also for retention in the skin. As there is no effective remedy for better penetration and retention is there because of the absence of an ideal carrier for effective and safe delivery of antipsoriatic drugs. Objectives: The main objective of this project is to develop Squalene integrated NLC based carbopol 940 gel to create a local drug depot in skin for improved efficacy against psoriasis. Methods: Homogenization method is used for the formulation of Nanostructured Lipid Carrier and were characterized on the basis of size, entrapment efficiency, polydispersity index (PDI), viscosity, spreadability, DSC, zeta potential, % in vitro release, in vitro skin permeation and retention studies, physical storage stability studies and in vivo studies can use other alternative models for induction of psoriasis by severe redness, swelling macroscopically and microvascular dilation edema lasting for 10 days. Further histopathology study was done to basses of changes in the skin. Conclusion: The optimized formulation of nanostructured lipid carrier-based gel has shown significant sustained release of clobetasol propionate. Further, this formulation has also shown retention in skin because of squalene as it is sebum derived lipid show affinity towards the sebaceous gland.

scholarly journals LORNOXICAM-LOADED NANOSPONGES FOR CONTROLLED ANTI-INFLAMMATORY EFFECT: IN VITRO/IN VIVO ASSESSMENT

2020 ◽  
pp. 217-223
Author(s):  
SEHAM M. SHAWKY ◽  
MAHA K. A. KHALIFA ◽  
HEBA A. EASSA
Keyword(s):  
Skin Permeation ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Inflammatory Activity ◽  
Carboxymethyl Cellulose Sodium ◽  
Anti Inflammatory

Objective: To design a controlled topical delivery system of lornoxicam (LX) in order to enhance skin permeation and treatment efficacy. Nanosponges were selected as a novel carrier for this purpose. Methods: Nanosponges were formulated via the emulsion solvent evaporation method using ethyl cellulose (polymer) and polyvinyl alcohol (surfactant). Nanosponge dispersions were characterized for colloidal properties, entrapment efficiency and in vitro release study. The nanosponge formulation (LS1) was then incorporated into carboxymethyl cellulose sodium hydrogels and evaluated for pH, viscosity and in vitro drug release. Skin irritation was evaluated, and anti-inflammatory activity was assessed via rat hind paw edema method. Results: Nanosponges were in the nano-sized range and attained a uniform round shape with a spongy structure. LS1exhibited the highest LX release after 6 h, so it was incorporated as hydrogel. Formulated hydrogels showed acceptable physicochemical parameters (pH, drug content and rheological properties). Skin irritation testing proved LX-loaded nanosponge hydrogel formulation (G1) to be non-irritant. In vivo study revealed an enhanced anti-inflammatory activity of G1 for 6 h (p<0.001). Conclusion: The developed nanosponge hydrogel is an efficient nanocarrier for improved and controlled topical delivery of LX.

Development of Polymeric Nanocarriers for Brain Targeted Delivery of Atorvastatin: A Quality-By-Design Approach

2020 ◽  
Vol 10 (2) ◽  
pp. 149-158
Author(s):  
Guilherme A.G. Martins ◽  
Fabio S. Murakami ◽  
Mauro S. Oliveira ◽  
Ana F. Furian ◽  
Helen Treichel ◽  
...  
Keyword(s):  
Quality By Design ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Physicochemical Characteristics ◽  
In Vivo Studies ◽  
Mean Size ◽  
Release Study ◽  
Vitro Release

Objective: Atorvastatin (ATV) is effective in reducing total cholesterol and low-density lipoprotein levels. Furthermore, it produces pleiotropic effects in neurodegenerative conditions such as Parkinson's, Alzheimer's, and epilepsy. However, due to the effective defense system of the central nervous system (CNS), the development of new medicines for clinical conditions has proven difficult. In this context, nanotechnology was applied as a promising solution to promote drug vectorization to the brain. Methods: The solvent emulsification-diffusion method was used to develop nanoparticles (NPs) based on polylactic acid and coated with polysorbate 80 containing ATV. Quality-by-Design (QbD) was used in the optimization of nanoparticles production through the application of the experimental design Box-Behnken Design. Results: After optimizing the independent factors including sonication time, surfactant concentration and surfactant volume, the NPs presented physicochemical characteristics such as entrapment efficiency of 86.4 ± 2.4%, mean size of 225.2 ± 4.8 nm, and zeta potential of -14.4 ± 0.36 mV. In the in vitro release study, approximately 20% of the encapsulated ATV was released. Conclusion: The application of QbD was very useful in demonstrating its applicability in the nanotechnological pharmaceutical area for controlling and predicting the influence of the variables in the production of NPs. The NPs developed in this study presented adequate physicochemical characteristics, which is promising for future in vivo studies. The physicochemical characteristics included entrapment efficiency of 86.4 ± 2.4%, mean size of 225.2 ± 4.8 nm, and zeta potential of -14.4 ± 0.36 mV. In the in vitro release study, approximately 20% of the encapsulated ATV was released. The application of QbD was very useful in demonstrating its applicability in the nanotechnological pharmaceutical area for controlling and predicting the influence of the variables in the production of NPs. The NPs developed in this study presented adequate physicochemical characteristics, which is promising for future in vivo studies.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

scholarly journals Plumbagin-Loaded Glycerosome Gel as Topical Delivery System for Skin Cancer Therapy

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 923
Author(s):  
Shadab Md ◽  
Nabil A. Alhakamy ◽  
Hibah M. Aldawsari ◽  
Mohammad Husain ◽  
Nazia Khan ◽  
...  
Keyword(s):  
Skin Cancer ◽  
Zeta Potential ◽  
Skin Permeation ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Skin Layer ◽  
Vesicle Size ◽  
Cytotoxicity Activities

Plumbagin (PLM) is a phytochemical which has shown cytotoxicity against of cancer cells both in vitro and in vivo. However, the clinical application of PLM has been hindered due to poor aqueous solubility and low bioavailability. The aim of the present study was to develop, optimize and evaluate PLM-loaded glycerosome (GM) gel and compare with conventional liposome (CL) for therapeutic efficacy against skin cancer. The GM formulations were optimized by employing design expert software by 3-level 3-factor design. The prepared GMs were characterized in vitro for vesicle size, size distribution, zeta potential, vesicle deformability, drug release, skin permeation, retention, texture, antioxidant and cytotoxicity activities. The optimized formulation showed a vesicle size of 119.20 ± 15.67 nm with a polydispersity index (PDI) of 0.145 ± 0.02, the zeta potential of −27 ± 5.12 mV and entrapment efficiency of 76.42 ± 9.98%. The optimized PLM-loaded GM formulation was transformed into a pre-formed gel which was prepared using Carbopol 934 polymer. The drug diffusion fluxes of CL gel and GM-loaded gel were 23.31 ±6.0 and 79.43 ± 12.43 µg/ cm2/h, respectively. The result of texture analysis revealed the adequate hardness, cohesiveness, consistency, and viscosity of the developed GM-loaded gel compared to CL gel. The confocal images showed that glycerosomal gel has deeper skin layer penetration as compared to the control solution. GM-loaded gel treated rat skin showed significantly (p < 0.05) higher drug accumulation in the dermis, higher cytotoxicity and higher antioxidant activity as compared to CL gel and PLM suspension. Thus, findings revealed that novel GM-loaded gel could be potential carriers for therapeutic intervention in skin cancer.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

DEVELOPMENT, CHARACTERIZATION AND BRAIN DISTRIBUTION STUDIES OF NANOSTRUCTURED LIPID CARRIER CONTAINING SAQUINAVIR MESYLATE FOR NASAL ADMINISTRATION

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (09) ◽  
pp. 38-47
Author(s):  
H. S. Mahajan ◽  
◽  
M. I. Patel
Keyword(s):  
Adverse Effect ◽  
Targeted Delivery ◽  
Entrapment Efficiency ◽  
Nasal Administration ◽  
Nanostructured Lipid Carrier ◽  
Brain Distribution ◽  
Scanning Calorimetry ◽  
Distribution Studies

The aim of the present study was to formulate saquinavir mesylate loaded nanostructured lipid carriers (SQVM-NLC) and evaluate its brain distribution after nasal administration. NLCs reveal some advantages for drug therapy over conventional carriers, including increased solubility, the ability to enhance storage stability, improved permeability and bioavailability, reduced adverse effect, prolonged half-life, and tissue-targeted delivery. SQVM-NLCs were prepared by hot high pressure homogenization and subsequent stabilization by lyophilization. QVM- NLC developed showed a particle with the size of 124.4 nm, polydispersity index of 0.267, entrapment efficiency of 73% and the zeta potential of -24.9 mV. The results from Scanning Electron Microscopy (SEM), powder X-ray diffraction (XRD)and differential scanning calorimetry (DSC) demonstrated that SQVM was present in NLC in an encapsulated molecule form. Mucosal toxicity study on sheep nasal mucosa showed no significant adverse effect of SQVMloaded NLC. SQVM-NLC showed slower release compared with saquinavir mesylate suspension in vitro. In vivo brain distribution studies demonstrated desired drug concentration in brain after intra nasal administration of SQVM-NLC than PDS. The results of the study also suggest that SQVM-NLC could be a promising drug delivery system for antiretroviral therapy.

Investigating the potential of Quercetin enthused nano lipoidal system for the management of dermatitis

2021 ◽  
pp. 6516-6526
Author(s):  
Deepti Dwivedi ◽  
Shubham Pandey ◽  
Shafaque Asif ◽  
Vineet Awasthi ◽  
Gurjeet Kaur ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Skin Permeation ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Laser Scanning Microscopy ◽  
Polydispersity Index ◽  
In Vivo Studies ◽  
Confocal Laser ◽  
Skin Retention

Objective: The present research work was undertaken to develop quercetin enthused nanolipoidal systems and its characterization. The objective was to investigate potential of prepared system in the management of DNCB induced dermatitis. Method: Nanolipoidal system was prepared in different combinations with quercetin, L-α phosphatidylcholine (SPC) and ethanol and characterized for particle size, polydispersity index (PDI), zeta potential, drug entrapment efficiency, percentage drug release, skin retention and skin permeation. Selected batches were further incorporated into Carbopol 934 base gel. The vesicles were in size range 324.19-359 nm while polydispersity index (PDI) ranges from 0.241-0.554 and for zeta potential, it was from -26.33 to -39.3 nm. Entrapment efficiency was from 23.77-94.68 %. Confocal laser scanning microscopy showed penetration depth of rhodamine enthused ethosome across rat skin up to 45.23 µm which was significantly higher than the rhodamine solution (10 µm). In dinitrochlorobenzene (DNCB) induced mice dermatitis model histopathology study showed a marked decrease in amount of inflammatory cell nucleus in mice treated with quercetin loaded ethosomal gel followed by 76.13% decrease in-ear swelling and ear mass respectively in morphology study. The conventional marketed formulation showed a nominal decrease in epidermal thickness. Further Primary irritation index was less than 0.4 indicating negligible irritation in all the groups. Results: The optimized formulation F6 with SPC and ethanol in the ratio of 20:80 displayed the highest drug content and entrapment efficiency of 94.68±1.14%. PDI was 0.241±0.11 and skin retention 7.7%. Batch F6 with vesicle size and zeta potential of 324.9±19 nm and -26.33 mV, respectively, was incorporated in Carbopol 934 base gel and the prepared gel was evaluated for morphology, spreadability, in vitro, ex vivo release study, and kinetics study and in vivo studies. Conclusion: The present study revealed that the developed ethosomal gel can be used for enhanced delivery of Quercetin via skin. The in vitro studies indicated that the gel serves as an efficient carrier for Quercetin. It showed its effectiveness in the management of dermatitis. Further, Quercetin loaded nanoethosomal gel formulation can be viewed as a promising drug delivery system for the management of dermatitis.

Ultra-deformable Liposomes as Flexible Nanovesicular Carrier to Penetrate Versatile Drugs Transdermally

2020 ◽  
Vol 10 (1) ◽  
pp. 12-20
Author(s):  
Gaurav Tiwari ◽  
Ruchi Tiwari ◽  
Rachna Singh ◽  
Awani K. Rai
Keyword(s):  
Skin Permeation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Human Organ ◽  
Ethanol Injection ◽  
Release Studies ◽  
Junction Protein ◽  
Penetration Ability

Introduction: Transferosomes also known as ultra-deformable liposomes were introduced by Gregor Cevc in 1990. These are deformable vesicles that transport drug across the skin, which is the best route of drug delivery because skin is the largest human organ with 3 kg total weight and a surface area of 1.5-2.0 m2. Methods: Transferosomes are able to efficiently deliver low as well as high molecular weight drug across the skin in terms of quantity and depth. Various methods used for the preparation of transferosomes such as thin film hydration method, reverse phase evaporation method, vortex/sonication method, ethanol injection method and freeze thaw method. Results: The prepared transferosomal preparation will be evaluated for particle shape and size, entrapment efficiency, stability study, penetration ability and skin permeation study. In vitro release studies are to be performed using a specific dissolution medium. Conclusion: Ultra deformable liposomes can be used for delivery of different drugs e.g. analgesic, anesthetic, corticosteroids, anticancer, sex hormone, insulin, gap junction protein, and albumin.

scholarly journals Boosting the Brain Delivery of Atazanavir through Nanostructured Lipid Carrier-Based Approach for Mitigating NeuroAIDS

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1059
Author(s):  
Saif Ahmad Khan ◽  
Saleha Rehman ◽  
Bushra Nabi ◽  
Ashif Iqubal ◽  
Nida Nehal ◽  
...  
Keyword(s):  
Targeted Delivery ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Fold Increase ◽  
Pharmacokinetic Studies ◽  
Nanostructured Lipid Carrier ◽  
Brain Delivery ◽  
The Brain

Atazanavir (ATZ) presents poor brain availability when administered orally, which poses a major hurdle in its use as an effective therapy for the management of NeuroAIDS. The utilization of nanostructured lipid carriers (NLCs) in conjunction with the premeditated use of excipients can be a potential approach for overcoming the limited ATZ brain delivery. Methods: ATZ-loaded NLC was formulated using the quality by design-enabled approach and further optimized by employing the Box–Behnken design. The optimized nanoformulation was then characterized for several in vitro and in vivo assessments. Results: The optimized NLC showed small particle size of 227.6 ± 5.4 nm, high entrapment efficiency (71.09% ± 5.84%) and high drug loading capacity (8.12% ± 2.7%). The release pattern was observed to be biphasic exhibiting fast release (60%) during the initial 2 h, then trailed by the sustained release. ATZ-NLC demonstrated a 2.36-fold increase in the cumulative drug permeated across the rat intestine as compared to suspension. Pharmacokinetic studies revealed 2.75-folds greater Cmax in the brain and 4-fold improvement in brain bioavailability signifying the superiority of NLC formulation over drug suspension. Conclusion: Thus, NLC could be a promising avenue for encapsulating hydrophobic drugs and delivering it to their target site. The results suggested that increase in bioavailability and brain-targeted delivery by NLC, in all plausibility, help in improving the therapeutic prospects of atazanavir.

Sign in / Sign up

Export Citation Format

Share Document