Ultra-deformable Liposomes as Flexible Nanovesicular Carrier to Penetrate Versatile Drugs Transdermally

2020 ◽  
Vol 10 (1) ◽  
pp. 12-20
Author(s):  
Gaurav Tiwari ◽  
Ruchi Tiwari ◽  
Rachna Singh ◽  
Awani K. Rai
Keyword(s):  
Skin Permeation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Human Organ ◽  
Ethanol Injection ◽  
Release Studies ◽  
Junction Protein ◽  
Penetration Ability

Introduction: Transferosomes also known as ultra-deformable liposomes were introduced by Gregor Cevc in 1990. These are deformable vesicles that transport drug across the skin, which is the best route of drug delivery because skin is the largest human organ with 3 kg total weight and a surface area of 1.5-2.0 m2. Methods: Transferosomes are able to efficiently deliver low as well as high molecular weight drug across the skin in terms of quantity and depth. Various methods used for the preparation of transferosomes such as thin film hydration method, reverse phase evaporation method, vortex/sonication method, ethanol injection method and freeze thaw method. Results: The prepared transferosomal preparation will be evaluated for particle shape and size, entrapment efficiency, stability study, penetration ability and skin permeation study. In vitro release studies are to be performed using a specific dissolution medium. Conclusion: Ultra deformable liposomes can be used for delivery of different drugs e.g. analgesic, anesthetic, corticosteroids, anticancer, sex hormone, insulin, gap junction protein, and albumin.

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

scholarly journals DIACEREIN-LOADED NIOSOMES (DC-NS): A NEW TECHNIQUE TO SUSTAIN THE RELEASE OF DRUG ACTION

2022 ◽  
pp. 156-163
Author(s):  
RASHAD M. KAOUD ◽  
EMAN J. HEIKAL ◽  
TAHA M. HAMMADY
Keyword(s):  
Physical Stability ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Molar Ratios ◽  
Tween 40 ◽  
A New Technique ◽  
The Stability ◽  
Tween 60

Objective: The study's main goal is to develop a suitable niosomes (NS) encapsulated drug for anti-inflammatory effects such as diacerein (DC) and to evaluate the system's vesicle size (VS), entrapment efficiency (EE %), physical stability and in vitro release. Methods: Tween (40 and 60), cholesterol, and stearylamine were used in a 1:1:0.1 molar ratios as non-ionic surfactants. Thin film hydration was used to create the NS. Results: The higher EE% was observed with NS (F11) prepared from tween 60, cholesterol and 2.5 min sonication. These formulations' release patterns were Higuchi diffusion and first order. For the stability study, NS formulations were stored at temperature between 2-8 °C for 60 d retains the most drugs when compared to room and high temperature conditions. Conclusion: The findings of this study have conclusively shown that after NS encapsulation of DC, drug release is prolonged at a constant and controlled rate.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF CURCUMIN LOADED JACKFRUIT SEED STARCH NANOPARTICLES

2020 ◽  
pp. 32-35
Author(s):  
JUNMONI NATH
Keyword(s):  
Particle Size ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Infrared Studies ◽  
Drug Entrapment Efficiency ◽  
Starch Nanoparticles ◽  
Vitro Release

Objectives: To meet the above aim the following objectives are undertaken: (1) Isolation of starch from jackfruit seeds and formulation of curcumin loaded jackfruit seed starch nanoparticles (2) In vitro evaluations of the drug loaded nanoparticles Methods: Jackfruit seed starch nanoparticles were prepared by Nanoprecipitation technique. In this technique, jackfruit seed starch was mixed with curcumin and acetone solution using a magnetic stirrer at 600 rpm. To the above solution, water were added dropwise and stirred at room temperature until acetone was completely vaporized. Nanoparticles were separated by centrifugation at 4000 rpm after 40 min. Results: Particle size of prepared nanoparticle formulations was found to be 371 to 411.72 nm with PDI of 0.148 to 0.356. The maximum % drug entrapment was found to be 57.34 % with formulation F5. In vitro release studies showed sustained release of drug till 12 h. Conclusion: The prepared nanoparticles were evaluated for its particle size, drug entrapment efficiency, in vitro drug release study, and surface morphology studies by scanning electron microscopy. The results of Fourier transform infrared studies of 1:1 physical mixture of drug and excipients confirmed the absence of incompatibility. Thus, the study concludes that curcumin loaded jackfruit seed starch nanoparticles were developed successfully by nanoprecipitation, which is expected to enhance the oral bioavailability of curcumin.

Development and Characterization of a Clobetasol Propionate Nanostructured Lipid Carrier-based Gel for the Treatment of Plaque Psoriasis

2020 ◽  
Vol 13 ◽  
Author(s):  
Ankita Dadwal ◽  
Neeraj Mishra ◽  
Raj Kumar Narang
Keyword(s):  
Skin Permeation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Homogenization Method ◽  
Clobetasol Propionate ◽  
In Vivo Studies ◽  
Nanostructured Lipid Carrier ◽  
Safe Delivery

Background: Psoriasis is an autoimmune disease of the skin with lapsing episodes of hyperkeratosis, irritation, and inflammation. Numerous traditional and novel drug delivery systems have been used for better penetration through psoriatic barrier cells and also for retention in the skin. As there is no effective remedy for better penetration and retention is there because of the absence of an ideal carrier for effective and safe delivery of antipsoriatic drugs. Objectives: The main objective of this project is to develop Squalene integrated NLC based carbopol 940 gel to create a local drug depot in skin for improved efficacy against psoriasis. Methods: Homogenization method is used for the formulation of Nanostructured Lipid Carrier and were characterized on the basis of size, entrapment efficiency, polydispersity index (PDI), viscosity, spreadability, DSC, zeta potential, % in vitro release, in vitro skin permeation and retention studies, physical storage stability studies and in vivo studies can use other alternative models for induction of psoriasis by severe redness, swelling macroscopically and microvascular dilation edema lasting for 10 days. Further histopathology study was done to basses of changes in the skin. Conclusion: The optimized formulation of nanostructured lipid carrier-based gel has shown significant sustained release of clobetasol propionate. Further, this formulation has also shown retention in skin because of squalene as it is sebum derived lipid show affinity towards the sebaceous gland.

FORMULATION AND OPTIMIZATION OF TOPICAL NANOEMULSION BASED GEL OF MOMETASONE FUROATE USING 32 FULL FACTORIAL DESIGN

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (06) ◽  
pp. 19-29
Author(s):  
Bhupendra G. Prajapati ◽  
◽  
Malay Jivani ◽  
Himanshu Paliwal ◽  
Keyword(s):  
Ex Vivo ◽  
Skin Permeation ◽  
In Vitro Release ◽  
Tween 80 ◽  
Stability Study ◽  
Mometasone Furoate ◽  
Gelling Agent ◽  
Topical Formulation ◽  
Topical Gel

Mometasone furoate (MF) is a glucocorticoid prodrug that faces the problem of poor aqueous solubility. Nanoemulsion-based topical gel of MF was formulated to enhance its solubility and potential of treating skin conditions. The selection of oil, surfactant and co-surfactant was done based on their solubility with the drug. The nanoemulsion was prepared using rose oil as the oil phase. Tween 80 and Transcutol P were used as surfactant and co-surfactant and they were blended in different ratios (1:0, 1:1, 2:1 and 3:1 w/w). The pseudo ternary diagrams were developed using these excipients and formulations exhibiting considerable nanoemulsion region were selected. The formulations were optimized by using Design Expert software for the globule size and cumulative percent release. The nanoemulsion formulations were characterized for in vitro release and stability study. The optimized nanoemulsions consisting of 2 % w/w oil, 30 % w/w Smix (Surfactant: Co-surfactant) and 67.9 % w/w water were consolidated into Carbopol 940 gelling agent to prepare three nanoemulsion-based gel formulations or nanoemulgels (NEG1-NEG3). Nanoemulgels were evaluated for their stability and ex vivo permeation of MF. The outcomes suggested that skin permeation of MF from all the nanoemulgel formulations was significantly enhanced as compared to the marketed mometasone furoate topical formulation.

Preliminary studies on optimization of anti-parkinson drug loaded lipid nanoparticles enriched hydrogel formulations for management of Parkinson’s disease

2021 ◽  
Vol 11 ◽  
Author(s):  
Kumara Swamy ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Parkinson’S Disease ◽  
Particle Size ◽  
Parkinson's Disease ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Release Studies ◽  
Lipid Nanocarriers ◽  
Vitro Release

Purpose: Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. Aim: The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that could enhance RP therapeutic outcomes during PD treatment. Methods: RP nanoparticles were prepared by homogenization followed by probe sonication and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), % assay, % entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. Results: The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h. Optimized SLN, NLC, and nanocarrier loaded hydrogel formulations were stable over three months at 4ºC and 25ºC storage conditions. Conclusion: Overall, the results demonstrated that lipid nanocarriers and their corresponding hydrogel formulations can be considered as a topical drug delivery vehicle for RP during the treatment of PD.

scholarly journals DESIGN, FORMULATION AND EVALUATION OF LIPOSOME CONTAINING ISONIAZID

2018 ◽  
Vol 10 (2) ◽  
pp. 52 ◽  
Author(s):  
Akshay Singha Roy ◽  
Sudipta Das ◽  
Arnab Samanta
Keyword(s):  
In Vitro Release ◽  
Particle Diameter ◽  
Weight Ratio ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Release Profile ◽  
Skewed Distribution ◽  
Size Analysis ◽  
Scanning Calorimetry

Objective: The objective of the present study was to formulate and evaluate liposomes loaded with isoniazid.Methods: Liposome of isoniazid was made by thin layer film hydration method. L-α-phosphatidylcholine and cholesterol were used to make multiamellar vesicles. Six batches of liposomes were prepared based on the different weight ratio of L-α-phosphatidylcholine and cholesterol. Differential scanning calorimetry (DSC) study conducted to study in any incompatibility.Results: The prepared liposomes were evaluated by particle size analysis, entrapment efficiency, release study and stability study. Particle sizes were determined from the scanning electron microscopy (SEM) photographs. When particle frequencies were plotted against particle diameter in the histogram, it showed that F1 batch had a skewed distribution towards smaller liposomes while F6 shows a proper bell-shaped curve with a mean at 225 mm. The percentage entrapment efficiency was found to be 8.99 ± 0.15 to 4.19 ± 0.12 % respectively. From the release profile, it was seen that F1 batch was fastest and F6 was slowest to release the drug. The satisfactory batch F1 was packed in Eppendorf tube and stored at 4 °C temperature for one month. At the end of one month, the samples were analyzed for their physical properties, drug entrapment and in vitro release profile. The percentage release was found to be 96.5 ± 3.2 after 4 h.Conclusion: The F1 batch showed most promising results compared to other. No significant change was found during one month’s stability study of final batch (F1).

scholarly journals LORNOXICAM-LOADED NANOSPONGES FOR CONTROLLED ANTI-INFLAMMATORY EFFECT: IN VITRO/IN VIVO ASSESSMENT

2020 ◽  
pp. 217-223
Author(s):  
SEHAM M. SHAWKY ◽  
MAHA K. A. KHALIFA ◽  
HEBA A. EASSA
Keyword(s):  
Skin Permeation ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Inflammatory Activity ◽  
Carboxymethyl Cellulose Sodium ◽  
Anti Inflammatory

Objective: To design a controlled topical delivery system of lornoxicam (LX) in order to enhance skin permeation and treatment efficacy. Nanosponges were selected as a novel carrier for this purpose. Methods: Nanosponges were formulated via the emulsion solvent evaporation method using ethyl cellulose (polymer) and polyvinyl alcohol (surfactant). Nanosponge dispersions were characterized for colloidal properties, entrapment efficiency and in vitro release study. The nanosponge formulation (LS1) was then incorporated into carboxymethyl cellulose sodium hydrogels and evaluated for pH, viscosity and in vitro drug release. Skin irritation was evaluated, and anti-inflammatory activity was assessed via rat hind paw edema method. Results: Nanosponges were in the nano-sized range and attained a uniform round shape with a spongy structure. LS1exhibited the highest LX release after 6 h, so it was incorporated as hydrogel. Formulated hydrogels showed acceptable physicochemical parameters (pH, drug content and rheological properties). Skin irritation testing proved LX-loaded nanosponge hydrogel formulation (G1) to be non-irritant. In vivo study revealed an enhanced anti-inflammatory activity of G1 for 6 h (p<0.001). Conclusion: The developed nanosponge hydrogel is an efficient nanocarrier for improved and controlled topical delivery of LX.

scholarly journals TRIVALENT ION CROSS-LINKED AND ACETALATED GELLAN GUM MICROSPHERES OF GLIMEPIRIDE

2020 ◽  
pp. 66-68
Author(s):  
SUDIPTA DAS ◽  
RIMI DEY
Keyword(s):  
In Vitro Release ◽  
Microscopic Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Release Profile ◽  
Gellan Gum ◽  
Long Term Stability ◽  
Vitro Release

Objectives: A novel formulation was developed with glimepiride loaded trivalent ion Al+3 cross-linked and acetalated gellan gum microspheres. Methods: The glimepiride loaded microspheres were formulated using sodium alginate and gellan gum. Cross-linking agents used for the microspheres were aluminum chloride (AlCl3) and glutaraldehyde (GA). The evaluation processes of prepared microspheres were carried out by in-vitro release study, swelling index, microscopic analysis, and entrapment efficiency. Results: All the formulations show good entrapment efficiency and the maximum entrapment 84.6% was governed by the formulation (F3) cross-linked by AlCl3 and GA and their obtained mean particle size were 12.46±3.21 μm. Release profile of the formulations revealed the sustained design of the drug, particularly this formulation (F3), releasing approximately 40% over 4 h. Conclusions: From this experiment, it can be accustomed that F3 possesses higher standard formulation than the rest due to good release profile and entrapment efficiency. Therefore, the long term stability study is required for future development of this formulation.

scholarly journals Preparation, In Vitro characterization and stability studies of ropinirole lipid nanoparticles enriched hydrogel for treatment of neurodegeneration diseases

2021 ◽  
Vol 11 (2-S) ◽  
pp. 66-75
Author(s):  
Kumara Swamy Samanthula ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Solid Lipid ◽  
Release Studies ◽  
Vitro Release

Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that might improve efficacy in PD treatment. RP nanoparticles were prepared by homogenization aided probe sonication method and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), assay, entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h and were stable over three months at 4ºC and 25ºC storage conditions. Keywords: Parkinson’s disease, Ropinirole, Solid lipid nanoparticles, Nanostructured lipid carriers, Hydrogel.

Sign in / Sign up

Export Citation Format

Share Document