Formulation and Evaluation of Isabgol and Liquorice Based Nutraceuticals Floating Tablets for Management of Gastric Ulcer

2020 ◽  
Vol 01 ◽  
Author(s):  
Ritesh Kumar Tiwari ◽  
Lalit Singh ◽  
Shashi Verma ◽  
Vijay Sharma
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Magnesium Stearate ◽  
Gastric Ulcers ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Zero Order Kinetics ◽  
Liquorice Extract ◽  
Tablet Formulations

Background: Floating tablets extend drug residence time, enhance bioavailability and promote the delivery of local drugs to the stomach. With this objective, floating tablets were prepared for the treatment of gastric ulcers containing aqueous extract of liquorice and Isabgol. Methods: Tablets containing HPMC K100M (hydrophilic polymer), liquorice extract, sodium bicarbonate (gas generating agent), talc, and magnesium stearate were prepared using direct compression method. Physical parameters of formulations such as diameter, thickness, hardness, friability, weight uniformity, drug content, buoyancy time, dissolution, and mechanism for drug release, were assessed. The formulations have been optimized based on buoyancy time and in- vitro drug release. Results: The diameter of all formulations was in the range 11.310-11.833 mm; thickness was in the range 4.02-4.071 mm. The hardness ranged from 3.1 to 3.4 kg/cm. All formulations passed the USP requirements for friability and uniformity of weight. All tablet formulations had a buoyancy period of less than 5 min and throughout the research, the tablet stayed in floating condition. All tablet formulations were accompanied in drug discharge by zero-order kinetics and model Korsemeyer-Peppas. Conclusion: It was discovered that the optimized formulation was F7, which released 98.5 percent of the drug in 8 hr. invitro, while the buoyancy time was 3.5 min. For gastroretentive drug delivery systems, formulations containing Isabgol, sodium bicarbonate and HPMC K100 M in combination may be promising.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

Formulation and Evaluation of Gastro-Retentive Floating Extended Release Metoprolol Tablets using Sodium Alginate and HPMC K-100M Combination

2015 ◽  
Vol 8 (3) ◽  
pp. 2947-2954
Author(s):  
Ashok Thulluru ◽  
M. Mohan Varma ◽  
C M Setty ◽  
Pavan Kumar Chintamaneni ◽  
S. Sriharsha Vardhan
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Fickian Diffusion ◽  
Wet Granulation ◽  
Average Weight ◽  
Metoprolol Succinate ◽  
Floating Tablets ◽  
Zero Order Kinetics ◽  
Gastro Retentive

The present study was aimed to convert Metoprolol Succinate convert into Gastro Retentive Floating Tablet (GRFT). The gas generating floating tablets of Metoprolol Succinate were prepared to increase the gastric retention and to extend the drug release up to 12 hr. and thereby enhancing its bioavailability. The floating tablets were formulated using HPMCK 100M alone and with the combination of sodium alginate to the polymer of varying concentrations. The tablets were prepared by non-aqueous wet granulation method. The formulated granules were evaluated for pre-compression studies, after the compression of tablets they were subjected to various post-compression studies: Average weight, thickness, density, hardness, % friability, % drug content, (In vitro buoyancy studies: floating time, total floating time and matrix integrity up to 12 hr) and the In vitro drug release studies. The optimized formulation (F4) was found to follow a near perfect zero order kinetics (regression coefficient,      r2 = 0.978). Higuchi plot for formulation, F4, showed r2 value of 0.978, suggesting that the diffusion and erosion plays an important role in the controlled release of the drug. The data was fitted to the Korsemeyer-Peppa’s equation; and the value of the diffusion component (n=0.654), for the formulation F4, indicated that the drug release follows non-Fickian diffusion.  

scholarly journals Preparation and In vitro Evaluation of Theophylline Loaded Gastroretentive Floating Tablets of METHOCEL K4M

1970 ◽  
Vol 7 (1) ◽  
pp. 65-70 ◽  
Author(s):  
Ferdous Khan ◽  
Md Shaikhul Millat Ibn Razzak ◽  
Md Ziaur Rahman Khan ◽  
Kazi Rashidul Azam ◽  
Sams Mohammad Anowar Sadat ◽  
...  
Keyword(s):  
Citric Acid ◽  
Drug Release ◽  
Sodium Bicarbonate ◽  
Release Rate ◽  
Lag Time ◽  
Release Mechanism ◽  
Drug Release Profile ◽  
Floating Tablets ◽  
Time Required

This investigation describes the preparation and in vitro evaluation of gastroretentive floating tablets of theophylline. Hydrophilic polymer METHOCEL K4M was used for its gel forming and release controlling properties. Sodium bicarbonate and citric acid were incorporated as gas generating agents. The effects of soluble components (sodium bicarbonate and citric acid), gel forming agent (METHOCEL K4M) and dose variation on drug release profile and floating properties were investigated. It has been observed that in all cases increase of the amount of floating agent caused a decrease of the floating lag time. Increase of theophylline load showed an increase of the floating lag time, which was independent of floating agent content. The release mechanisms were explored and explained with zero order, first order, Higuchi, Korsmeyer and Hixon-Crowell equations. The release rate, extent and mechanisms were found to be governed by the content of polymer and floating agent. The content of active ingredient was also a vital factor in controlling drug release pattern. It was found that polymer content and amount of floating agent significantly affected the time required for 50% of drug release (T50%), percentage drug release after 8 hours, release rate constant, and diffusion exponent (n). Kinetic modeling of dissolution profiles revealed that the drug release mechanism could range from diffusion controlled to case II transport, which was mainly dependent on presence of relative amount of theophylline, polymer and floating agent. Key words: Gastroretention, Floating tablet, Theophylline  DOI = 10.3329/dujps.v7i1.1220 Dhaka Univ. J. Pharm. Sci. 7(1): 65-70, 2008 (June)

scholarly journals Formulation and evaluation of matrix tablets of Eperisone hydrochloride

2020 ◽  
Vol 1 (4) ◽  
pp. 131-136
Author(s):  
Peruboina Neelima ◽  
Maddula Venkata Ramana
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Hepatic Metabolism ◽  
Magnesium Stearate ◽  
Matrix Tablets ◽  
Spinal Reflexes ◽  
Wet Granulation ◽  
Physical Parameters ◽  
Weight Variation

The aim of the present research is to develop and optimize Eperisone Hydrochloride extended release matrix tablets. Eperisone Hydrochloride is an antispasmodic drug mainly used to relieve pains it acts by relaxing the skeletal and smooth vascular muscles by blocking spinal reflexes drug which has oral bioavailability of 70% due to hepatic metabolism. Sustained release matrix tablets of Eperisone Hydrochloride were prepared through wet granulation technique by using HPMC K4M and EC as polymers, PVPK30 as binder, Magnesium stearate as lubricant and Talc as glidant. The granules of different formulations were determined for pre compression parameters. The prepared granules along with the excipients were then compressed. The formulated tablets were evaluated for physical characteristics viz. Hardness, Thickness, % Weight variation, Friability and the drug content. Furthermore the tablets evaluated for the in vitro release studies. Out of all the 8 formulations F7 showed desired characteristics in the physical parameters and in vitro drug release of 85.48% in 12hrs.The F7 dissolution data was best fitted to the Zero order model. The prepared Eperisone Hydrochloride matrix tablets found to be having a potential extended drug release.

scholarly journals Formulation and Evaluation of Gastroretentive Floating Tablets of Quetiapine Fumarate

2021 ◽  
Vol 11 (3-S) ◽  
pp. 65-73
Author(s):  
Keyur S. Patel ◽  
Akshar N. Rao ◽  
Deepa R. Patel ◽  
Dhaval M. Patel ◽  
Advaita B. Patel
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Factorial Design ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Lag Time ◽  
Quetiapine Fumarate ◽  
Floating Tablets ◽  
Vitro Release

The objective of the present study was to develop gastroretentive floating tablets of quetiapine fumarate. The gastroretentive floating tablets of quetiapine fumarate were formulated using natrosol 250 HHX as a sustained release polymer and sodium bicarbonate as a gas forming agents.  A 32 factorial design was employed to study the influence of concentration of natrosol HHX 250 (X1) and concentration of sodium bicarbonate (X2) on the dependent variables % drug release at 1h (Y1), % drug release at 8 h (Y2) and floating lag time (Y3). The optimized formulation (O1) showed floating lag time 49 ± 3 sec and % drug release 99.54± 0.81 at 12 h. The in vitro release of F1-F9 batches were found in between 99.95 ± 1.18 %  to  86.32 ±1.71 % at 12 h. Floating lag time of F1-F9 batches were found to be 25± 2 sec to 178 ± 3 sec. FTIR studies shown that there was no  interaction between quetiapine fumarate and excipients. From the factorial design batches it was found that floating lag time was decreased with increasing the amount of sodium bicarbonate and decreasing the amount of natrosol 250 HHX. Here % release of drug was decreased with increase the extent of natrosol 250 HHX. The in-vitro release kinetics revealed Korsmeyer-Peppas model is followed and drug release is by anomalous diffusion. Keywords: Quetiapine fumarate, Natrosol 250 HHX, Sodium bicarbonate, Gastroretentive floating tablets

scholarly journals Osmotic release tablets formulation and evaluationof ace inhibitor molecule

2021 ◽  
pp. 24-35
Author(s):  
Prachetha Kolli ◽  
Sudhakar Kancharla ◽  
Dr.K.Venkata Gopaiah
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Magnesium Stearate ◽  
Wet Granulation ◽  
Inhibitor Molecule ◽  
In Vitro Drug Release ◽  
Zero Order Kinetics ◽  
Manufacturing Procedure ◽  
Release Data

In the present study the Suitable analytical methods were developed for the drug using UV – visible spectrophotometer. From the Preformulation study and thermal analysis (DSC), the interference was verified and found that the drug did not interfere with the excipient use.Core tablet was successfully prepared by wet granulation using Polyethylene oxide WSR N80, Mannitol 25C, silicon dioxide, magnesium stearate, Polyethylene WSR 303, sodium chloride, hydroxypropyl methylcellulose (HPMC E5), Iron oxide red. Isopropyl cellulose was found to be suitable granulating fluid for binder.Formulation of the drug coating was optimized by using 22 factorial design of experiment.The coated tablets were evaluated for various physicochemical parameter. About  79 to 95% of drug was released from the formulation A-E in 24 hr in 6.8 phosphate buffer.The in vitro drug release data were plotted in zero order kinetics and optimized batch were evaluated on the basis of regression coefficient.The in-vitro drug release from the optimized formulation in the dissertation was directly proportional to the concentration of plasticizer and concentration of cellulose acetate.The manufacturing procedure was standardized and reproducible

Formulation and In-vitro Evaluation of Chewable Tablets of Montelukast Sodium

2015 ◽  
Vol 5 (3) ◽  
Author(s):  
Laxman Devkota ◽  
Bhupendra Poudel ◽  
Junu Silwal
Keyword(s):  
In Vitro Release ◽  
Magnesium Stearate ◽  
Physical Parameters ◽  
Artificial Sweetener ◽  
Leukotriene Receptor Antagonist ◽  
Montelukast Sodium ◽  
Chewable Tablets ◽  
Leukotriene Receptor ◽  
Vitro Release

The objective of the present study is to develop chewable tablets containing different pharmaceutical compositions with simple manufacturing procedures using different excipients. Mannitols, L-HPC 11, Aspartame, Crospovidone, Crospovidone, Aerosil, and Magnesium Stearate are used as excipients for effective formulation of anti-asthmatic drug Montelukast. Montelukast is a selective, orally acting leukotriene receptor antagonist that is used for the treatment of asthma and seasonal allergic rhinitis. Montelukast chewable tablets were prepared by Direct Compression methods using suitable excipients. The chewable tablets were better presented using artificial sweetener Aspartame as flavouring agent. A total of forteen formulations were prepared and the granules were evaluated for pre-compression parameters. The formulated tablets were evaluated for post-compression parameters .The results showed that all the physical parameters were within the acceptable limits. The in vitro release study of all the formulations showed good release. The study concludes that aforementioned excipients can be used to design chewable montelukast sodium tablets.

3 (2) Factorial Design Assisted Crushed Puffed Rice-HPMC-Chitosan based Hydrodynamically Balanced System of Metoprolol Succinate

2020 ◽  
Vol 10 (3) ◽  
pp. 237-249
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Hydroxypropyl Methylcellulose ◽  
Batch Size ◽  
Metoprolol Succinate ◽  
Zero Order Kinetics ◽  
Two Factors ◽  
Puffed Rice ◽  
Model Drug

Introduction: Hydrodynamically balanced system (HBS) possesses prolonged and continuous delivery of the drug to the gastrointestinal tract which improves the rate and extent of medications that have a narrow absorption window. The objective of this work was to develop a Hydrodynamically Balanced System (HBS) of Metoprolol Succinate (MS) as a model drug for sustained stomach specific delivery. Materials and Methods: Experimental batches were designed according to 3(2) Taguchi factorial design. A total of 9 batches were prepared for batch size 100 capsules each. Formulations were prepared by physically blending MS with polymers followed by encapsulation into hard gelatin capsule shell of size 0. Polymers used were Low Molecular Weight Chitosan (LMWCH), Crushed Puffed Rice (CPR), and Hydroxypropyl Methylcellulose K15 M (HPMC K15M). Two factors used were buoyancy time (Y1) and time taken for 60% drug release (T60%; Y2). Results: The drug excipient interaction studies were performed by the thermal analysis method which depicts that no drug excipient interaction occurs. In vitro buoyancy studies and drug release studies revealed the efficacy of HBS to remain gastro retentive for a prolonged period and concurrently sustained the release of MS in highly acidic medium. All formulations followed zero-order kinetics. Conclusion: Developed HBS of MS with hydrogel-forming polymers could be an ideal delivery system for sustained stomach specific delivery and would be useful for the cardiac patients where the prolonged therapeutic action is required.

FORMULATION AND CHARACTERIZATION OF MEDICATED CHEWING GUMS OF DEXTROMETHORPHAN HYDROBROMIDE

INDIAN DRUGS ◽  
2012 ◽  
Vol 49 (12) ◽  
pp. 29-35
Author(s):  
N.G.N Swamy ◽  
◽  
P Shilpa ◽  
Z. Abbas
Keyword(s):  
Drug Release ◽  
Systemic Absorption ◽  
Chewing Gum ◽  
Release Mechanism ◽  
Physical Parameters ◽  
In Vitro Drug Release ◽  
Chewing Gums ◽  
Dextromethorphan Hydrobromide ◽  
Spray Dried

Chewing gums are mobile drug delivery systems, with a potential for administering drugs either for local action or for systemic absorption via buccal route. Dextromethorphan hydrobromide chewing gum formulations were made employing Pharmagum M as the base with an aim to overcome the firstpass effect, reducing the risk of overdosing, ease of administration and for achieving faster systemic absorption. Dextromethorphan hydrobromide was further transformed into spray dried form and incorporated into Pharmagum M base with the object of solubility enhancement and masking the bitter taste of the drug. The prepared medicated chewing gums were evaluated for various precompression and postcompression parameters. The in vitro drug release profiles were carried out employing Erweka DRT chewing apparatus. It was observed that increasing the chewing gum base concentration resulted in a decreased drug release profile. The drug in the spray dried form revealed improved performance in comparison to the directly contained drug. The drug release data were fitted into various kinetic models. It was observed that the drug release was matrix diffusion controlled and revealed a non-Fickian drug release mechanism. Accelerated stability studies were carried out on select formulations as per ICH guidelines. The formulations were found to be stable in respect to physical parameters and no significant deviations were seen in respect to in vitro drug release characteristics.

Sign in / Sign up

Export Citation Format

Share Document