scholarly journals Use of Seawater and Pesticides (Geunsami and Pullmagi Gold) for Suppressing Growth of Spartina anglica and Their Effects on Soil Stability

2021 ◽  
Vol 13 (8) ◽  
pp. 4229
Author(s):  
Fakher Abbas ◽  
Fang Lin ◽  
Zhaolong Zhu ◽  
Shaoshan An

As soil stability is a complex phenomenon, various methods and indexes were introduced to assess the strength of soils. Because of the limitations of different stability methods and indexes (including wet sieving-based), we aimed to presents a relative stability index (RI) that was based on the estimated components of the soil overall disruptive characteristic curve (SODC): (1) soil disruption constant (Ki, that is based upon dispersion energy of soils); (2) resulting change in mean weight diameter (ΔMWD). To evaluate the effectiveness and limitations of RI as well as to compare it with classical soil stability indexes of mean weight diameter (MWD) and geometric mean diameter (GMD). Ultrasonic agitation (UA) along with a wet sieving method (followed by dry sieving) was applied against four different soils named on the basis of sample location, Qingling soil (QL), Guanzhong soil (GZ), Ansai soil (AS), and Jingbian soil (JB). To evaluate the relative strength of soils at different applied energies (increase in sonication duration usually resulted in increased input energy and temperature of soil–water suspension), soils were subjected to six sonication durations (0, 30, 60, 120, 210, and 300 s) with a fixed (and exact) initial amplitude and temperature. Output energy was calculated based on the amplitude and temperature of the suspension, vessel, and system. The most abrupt and maximum disruption of soil aggregates was observed at a dispersion energy level of 0–200 J g−1. The MWD value of surface and subsurface ranged between 0.58 to 0.15 mm and 0.37 to 0.17 mm, respectively, while GMD was ranged from 0.14 to 0.33 mm overall. The results for MWD and GMD showed a similar trend. MWD and GMD showed more strong associations with physicochemical characteristics of soil than RI. A non-significant correlation was found between RI and MWD/GMD. Contrary to MWD and GMD, RI was significantly positively correlated with sand content; this finding indicated the influential role of sand in assessing the soil’s relative strength. The results indicated that JB soil possessed the least MWD and GMD but proved to be relatively stable because of having the highest RI value.


1970 ◽  
Vol 58 (2) ◽  
pp. 329 ◽  
Author(s):  
J. C. E. Hubbard

Agronomy ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 72
Author(s):  
Vilma Naujokienė ◽  
Daiva Rimkuvienė ◽  
Egidijus Šarauskis

Different bio-impacts affect the various properties and composition of soil, plant residues, harvests, and technological processes, as well as the interactions between different parts of the soil, working machine tools, energy consumption and environmental pollution with harmful gases. To summarize the wide-coverage investigations of various aspects of different bio-impact parameters, a multicriteria evaluation was conducted. Experimental research shows that different bioeffects such as those of agricultural practices can be oriented towards a reduction in fuel consumption, followed by reductions in CO2 emissions from machinery and changes in soil properties, dynamics of composition, yield and other parameters. A multicriteria assessment of the essential parameters would give farmers new opportunities to choose one optimal decision for reducing fuel consumption and increasing agricultural production, thereby reducing the negative environmental impact of soil cultivation processes, increasing yields and improving soil. Of all the properties investigated, from a practical point of view, the selection of the most important of all the essential links, such as reducing energy and expenditure, reducing environmental pollution, improving soil, and increasing yields and productivity, is reasonable. The evaluation of the bio-impact effects in agriculture by accounting for many criteria from several aspects was the main objective of the multicriteria assessment using the analytic hierarchy process. Based on the results of a multivariable research of fuel consumption—C1, C2, yield—C3, CO2 from soil—C4, density—C5, total porosity—C6, humus—C7, soil stability—C8, and soil moisture content—C9, the evaluation used experimental research data and the Simple Additive Weighting (SAW) mathematical method to find the best-case scenario. Multicriteria effectiveness was most pronounced after the first and third soil bio-impacts by using a solution of essential oils of plants, 40 species of various herbs extracts, marine algae extracts, mineral oils, Azospirillum sp. (N), Frateuria aurentia (K), Bacillus megaterium (P), seaweed extract. The most important goal was to achieve the best soil bio-impact effectiveness—minimized energy consumption from ploughing and disc harrowing operations, parallelly minimized harmful emissions from agricultural machinery, minimized CO2 from soil, soil density, maximized soil total porosity, soil humus, soil stability, yield and optimized soil moisture.


2019 ◽  
Vol 16 ◽  
pp. e00201 ◽  
Author(s):  
Adel Sepehr ◽  
Mahvan Hassanzadeh ◽  
Emilio Rodriguez-Caballero

PLoS ONE ◽  
2011 ◽  
Vol 6 (10) ◽  
pp. e25629 ◽  
Author(s):  
Hong-li Li ◽  
Guang-chun Lei ◽  
Ying-biao Zhi ◽  
Shu-qing An ◽  
He-ping Huang ◽  
...  

2010 ◽  
Vol 90 (1) ◽  
pp. 35-49
Author(s):  
Nedeljko Stojnic

Main goal of this investigation is to present a mechanism, terrain shaping of a certain slope during the sliding process, in time history, up to its final form. It means that except slope material movement what is the slope composed, in time of slope occurrence is emphasized becoming of a new terrain form as a result of the process itself, too. This way of investigation definitively opens a new approach in a terrain relief form prediction depends on terrain characteristics and expecting weather occurrence. Here is analyzed a process of land crumbing and sliding on a Neogene slope at Ubilci place (part of urban area of Smederevo city), which was triggered by humane activities (undercutting of slope) and weather influence (rainy period). To present continuity flow of the slope material movement, it is used extended distinct element method. Profile line of the terrain surface which is obtained by numerical analyzes is in very good agreement with the finale profile line of the slope where a real case of crumbing and soil sliding has occurred. .


2010 ◽  
Vol 87 (4) ◽  
pp. 553-560 ◽  
Author(s):  
Ralf Hübner ◽  
Roger J.H. Herbert ◽  
K. Brian Astin
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document