scholarly journals Спектры инфракрасного отражения пленок топологического изолятора Pb-=SUB=-1-x-=/SUB=-Sn-=SUB=-x-=/SUB=-Se (x=0.2, 0.34) на подложке ZnTe/GaAs и колебательные моды многослойных структур

2018 ◽  
Vol 52 (1) ◽  
pp. 38
Author(s):  
Н.Н. Новикова ◽  
В.А. Яковлев ◽  
И.В. Кучеренко ◽  
В.С. Виноградов ◽  
Ю.А. Алещенко ◽  
...  
Keyword(s):  
Room Temperature ◽  
Molecular Beam ◽  
Layer Structure ◽  
Dispersion Analysis ◽  
Ir Radiation ◽  
State Approximation ◽  
Steady State Approximation ◽  
The Right ◽  
Overlap Parameter ◽  
Interface Mode

AbstractThe reflectance spectra of the topological insulator Pb_1– x Sn_ x Se ( x = 0.2, 0.34) films grown by molecular-beam epitaxy on a ZnTe/GaAs substrate are measured in the range of 12–2500 cm^–1 at room temperature. Using dispersion analysis, the frequencies of transverse optical phonons, plasma frequencies, highfrequency permittivities, and layer thicknesses are determined. In the quasi-steady-state approximation, the interface mode frequencies of the four-layer structure are calculated as a function of the overlap parameter χ_1 (0 ≤ χ_1 ≤ 1). The parameter describes the degree of overlap of two interface modes localized at planes bounding the layer to the right and left. The existence of interacting interface modes in the structure makes its spectrum different from the sum of component spectra. These differences manifest themselves in the experiment. The conditions of the interaction of interface modes with IR radiation are discussed.

Evaluation of 99mTc-Label led Vitamin K4 as an Agent for Testicular Imaging

1991 ◽  
Vol 30 (01) ◽  
pp. 35-39 ◽  
Author(s):  
H. S. Durak ◽  
M. Kitapgi ◽  
B. E. Caner ◽  
R. Senekowitsch ◽  
M. T. Ercan
Keyword(s):  
Soft Tissue ◽  
Room Temperature ◽  
Normal Subjects ◽  
Left Testis ◽  
Wide Range ◽  
Activity Ratios ◽  
The Right ◽  
Radioactivity Levels

Vitamin K4 was labelled with 99mTc with an efficiency higher than 97%. The compound was stable up to 24 h at room temperature, and its biodistribution in NMRI mice indicated its in vivo stability. Blood radioactivity levels were high over a wide range. 10% of the injected activity remained in blood after 24 h. Excretion was mostly via kidneys. Only the liver and kidneys concentrated appreciable amounts of radioactivity. Testis/soft tissue ratios were 1.4 and 1.57 at 6 and 24 h, respectively. Testis/blood ratios were lower than 1. In vitro studies with mouse blood indicated that 33.9 ±9.6% of the radioactivity was associated with RBCs; it was washed out almost completely with saline. Protein binding was 28.7 ±6.3% as determined by TCA precipitation. Blood clearance of 99mTc-l<4 in normal subjects showed a slow decrease of radioactivity, reaching a plateau after 16 h at 20% of the injected activity. In scintigraphic images in men the testes could be well visualized. The right/left testis ratio was 1.08 ±0.13. Testis/soft tissue and testis/blood activity ratios were highest at 3 h. These ratios were higher than those obtained with pertechnetate at 20 min post injection.99mTc-l<4 appears to be a promising radiopharmaceutical for the scintigraphic visualization of testes.

Synthesis and Kinetics of Highly Substituted Piperidines in the Presence of Tartaric Acid as a Catalyst

2018 ◽  
Vol 21 (4) ◽  
pp. 302-311
Author(s):  
Younes Ghalandarzehi ◽  
Mehdi Shahraki ◽  
Sayyed M. Habibi-Khorassani
Keyword(s):  
Ambient Temperature ◽  
Tartaric Acid ◽  
Aromatic Aldehydes ◽  
One Pot ◽  
Rate Determining Step ◽  
State Approximation ◽  
Solvent Free Conditions ◽  
Steady State Approximation ◽  
Absorbance Changes ◽  
The One

Aim & Scope: The synthesis of highly substituted piperidine from the one-pot reaction between aromatic aldehydes, anilines and β-ketoesters in the presence of tartaric acid as a catalyst has been investigated in both methanol and ethanol media at ambient temperature. Different conditions of temperature and solvent were employed for calculating the thermodynamic parameters and obtaining an experimental approach to the kinetics and mechanism. Experiments were carried out under different temperature and solvent conditions. Material and Methods: Products were characterized by comparison of physical data with authentic samples and spectroscopic data (IR and NMR). Rate constants are presented as an average of several kinetic runs (at least 6-10) and are reproducible within ± 3%. The overall rate of reaction is followed by monitoring the absorbance changes of the products versus time on a Varian (Model Cary Bio- 300) UV-vis spectrophotometer with a 10 mm light-path cell. Results: The best result was achieved in the presence of 0.075 g (0.1 M) of catalyst and 5 mL methanol at ambient temperature. When the reaction was carried out under solvent-free conditions, the product was obtained in a moderate yield (25%). Methanol was optimized as a desirable solvent in the synthesis of piperidine, nevertheless, ethanol in a kinetic investigation had none effect on the enhancement of the reaction rate than methanol. Based on the spectral data, the overall order of the reaction followed the second order kinetics. The results showed that the first step of the reaction mechanism is a rate determining step. Conclusion: The use of tartaric acid has many advantages such as mild reaction conditions, simple and readily available precursors and inexpensive catalyst. The proposed mechanism was confirmed by experimental results and a steady state approximation.

Room‐temperature excitonic optical nonlinearities of molecular beam epitaxially grown ZnSe thin films

1988 ◽  
Vol 52 (3) ◽  
pp. 182-184 ◽  
Author(s):  
N. Peyghambarian ◽  
S. H. Park ◽  
S. W. Koch ◽  
A. Jeffery ◽  
J. E. Potts ◽  
...  
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Molecular Beam ◽  
Optical Nonlinearities ◽  
Znse Thin Films

scholarly journals Enzyme kinetics and metabolic control. A method to test and quantify the effect of enzymic properties on metabolic variables

1990 ◽  
Vol 269 (3) ◽  
pp. 697-707 ◽  
Author(s):  
L Acerenza ◽  
H Kacser
Keyword(s):  
Enzyme Concentration ◽  
Time Dependent ◽  
Experimental Systems ◽  
State Approximation ◽  
Metabolic Systems ◽  
Steady State Approximation ◽  
Before And After ◽  
Factor Alpha ◽  
Metabolic Variables ◽  
Time Invariant

It is usual to study the sensitivity of metabolic variables to small (infinitesimal) changes in the magnitudes of individual parameters such as an enzyme concentration. Here, the effect that a simultaneous change in all the enzyme concentrations by the same factor alpha (Co-ordinate-Control Operation, CCO) has on the variables of time-dependent metabolic systems is investigated. This factor alpha can have any arbitrary large value. First, we assume, for each enzyme measured in isolation, the validity of the steady-state approximation and the proportionality between reaction rate and enzyme concentration. Under these assumptions, any time-invariant variable may behave like a metabolite concentration, i.e. S alpha = Sr (S-type), or like a flux, i.e. J alpha = alpha Jr (J-type). The subscripts r and alpha correspond to the values of the variable before and after the CCO respectively. Similarly, time-dependent variables may behave according to S alpha (t/alpha) = Sr (t) (S-type) or to J alpha (t/alpha) = alpha J r (t) (J-type). A method is given to test these relationships in experimental systems, and to quantify deviations from the predicted behaviour. A positive test for deviations proves the violation of some of the assumptions made. However, the breakdown of the assumptions in an enzyme-catalysed reaction, studied in isolation, may or may not affect significantly the behaviour of the system when the component reaction is embedded in the metabolic network.

Room-temperature ferromagnetism in (Mn, N)-codoped TiO2 films grown by plasma assisted molecular beam epitaxy

2008 ◽  
Vol 104 (9) ◽  
pp. 093914 ◽  
Author(s):  
X. Y. Li ◽  
S. X. Wu ◽  
L. M. Xu ◽  
Y. J. Liu ◽  
X. J. Xing ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Room Temperature ◽  
Molecular Beam ◽  
Room Temperature Ferromagnetism ◽  
Tio2 Films ◽  
Codoped Tio2

The Quasi-Steady-State Approximation: Numerical Validation

1998 ◽  
Vol 75 (9) ◽  
pp. 1158 ◽  
Author(s):  
Richard A. B. Bond ◽  
Bice S. Martincigh ◽  
Janusz R. Mika ◽  
Reuben H. Simoyi
Keyword(s):  
Steady State ◽  
Quasi Steady State ◽  
Numerical Validation ◽  
State Approximation ◽  
Steady State Approximation

GalnAsSb Materials for Thermophotovoltaics

1996 ◽  
Vol 450 ◽  
Author(s):  
C. A. Wang ◽  
G. W. Turner ◽  
M. J. Manfra ◽  
H. K. Choi ◽  
D. L. Spears
Keyword(s):  
Room Temperature ◽  
Molecular Beam ◽  
Hole Concentration ◽  
Organometallic Vapor Phase Epitaxy ◽  
Room Temperature Photoluminescence ◽  
P Type ◽  
First Time ◽  
Lattice Matched ◽  
Comparable Quality ◽  
Peak Emission

ABSTRACTGai1−xInxASySb1-y (0.06 < x < 0.18, 0.05 < y < 0.14) epilayers were grown lattice-matched to GaSb substrates by low-pressure organometallic vapor phase epitaxy (OMVPE) using triethylgallium, trimethylindium, tertiarybutylarsine, and trimethylantimony. These epilayers have a mirror-like surface morphology, and exhibit room temperature photoluminescence (PL) with peak emission wavelengths (λP,300K) out to 2.4 μm. 4K PL spectra have a full width at half-maximum of 11 meV or less for λP,4K < 2.1 μm (λP,300K = 2.3 μm). Nominally undoped layers are p-type with typical 300K hole concentration of 9 × 1015 cm−3 and mobility ∼ 450 to 580 cm2/V-s for layers grown at 575°C. Doping studies are reported for the first time for GalnAsSb layers doped n type with diethyltellurium and p type with dimethylzinc. Test diodes of p-GalnAsSb/n-GaSb have an ideality factor that ranges from 1.1 to 1.3. A comparison of electrical, optical, and structural properties of epilayers grown by molecular beam epitaxy indicates OMVPE-grown layers are of comparable quality.

Sign in / Sign up

Export Citation Format

Share Document