scholarly journals Synthesis, Spectroscopic and Computational Studies of Some Metals Chelates with Chromene-2-one and Pyrazine-Based Ligands

2019 ◽  
Vol 20 (1) ◽  
pp. 160
Author(s):  
Taghreed Mohy Al-Deen Musa ◽  
Mahmoud Najim Abid Aljibouri ◽  
Bayader Fadhil Abbas ◽  
Nahid Hasani

The present paper deals with the synthesis of cobalt(II), nickel(II), copper(II) and cadmium(II) complexes with two bidentate ligands, L1 (3-(quinoxaline-2-yl)-coumarin) and L2 (2-methylene-2H-chromene-3-(methyl carbonimidic)thioanhydride). The L1 ligand was prepared by treating w-bromo-3-acetylcoumarin with 1,2-phenylenediamine whereas the ligand L2 was prepared through substitution reaction ofw-bromo-3-acetylcoumarin with potassium thiocyanate in ethanol medium. The confirmation of the structures for L1 and L2 were done by (C.H.N.S.) elemental analysis, FT-IR, NMR and mass spectra. The metal complexes of cobalt(II), nickel(II), copper(II) and cadmium(II), with L1 and L2, were prepared and isolated in the solid state then characterized by (C.H.N.M) elemental analysis, proton and carbon-13 NMR, FT-IR and mass spectra. Furthermore, the thermal analysis (TG-DSC) for some complexes assisted us in the elucidation of the suggested structures of complexes and confirmed their thermal stability. The results obtained from elemental analysis, magnetic susceptibility and thermal analysis confirmed that all metal complexes were formed in 2:1 molar ratio of ligand to metal with octahedral structures except cadmium(II) complexes which were in a tetrahedron geometry with 1:1 mole ratio. The complexes are found to be soluble in DMF and DMSO. The results obtained from TG-DSC analysis revealed that the metal complexes were thermally stable with point decomposition over 350 °C. The DFT/TDDFT calculations were carried out to provide the electronic structures and spectra of the compounds.

2010 ◽  
Vol 93-94 ◽  
pp. 13-16
Author(s):  
Khalil J. Asali

Reactions of the labile complex (Me3tach)M(CO)3 (Me3tach = 1,3,5-trimethyl-1,3,5-triazacyclohexane; M = W, Mo) with bis(phenylthio)alkanes ( = PhS(CH2)nSPh), (2:3 molar ratio) in CH2Cl2 as solvent (at 35 oC M = W, 0 oC M = Mo) afforded in good yields bimetallic tricarbonyl complexes triply- bridged by bis(phenylthio)alkanes of the type [M(CO)3]2(μ-PhS-(CH2)n-SPh)3 [n = 3 (a), 4 (b), 5 (c), 6 (d); M = W (1), Mo (2)]. These new triply-bridged complexes were characterized by 1H NMR, FT-IR and elemental analysis. Additionally, it has been observed that the thermodynamic stability of some of these new complexes in chlorinated hydrocarbons depends mainly on the nature of the metal center and varies in the order W >> Mo.


2016 ◽  
Vol 13 (2) ◽  
pp. 105-114
Author(s):  
Baghdad Science Journal

New metal ion complexes were synthesized with the general formula; K[PtLCl4], [ReLCl4] and K[ML(Cl)2] where M = Pd(II), Cd(II), Zn(II) and Hg(II), from the Azo ligand (HL) [2-Hydroxy-3-((5-mercapto-1,3,4-thiadiazol-2-yl)diazenyl)-1-naphth aldehyde] (HL) the ligand was synthesized from (2-hydroxy-1-naphthaldehyde) and (5-amino-1,3,4-thiadiazole-2-thiol). The ligand and its metal complexes are characterized by phisco- chemical spectroscopic techniques (FT.IR, UV-Vis and Mass spectra, elemental analysis, molar conductivity, Atomic Absorption, Chloride contain and magnetic susceptibility). The spectral data suggest that the (HL) behaves as a bidentate ligand in all complexes. These studies revealed tetrahedral geometries for all metal complexes, except square planar for Pd(II) complex and except octahedral geometry for Pt(IV) and Re(V) complexes. The study of complexes formation via molar ratio of (M:L) as (1:1). Theoretical treatment of this ligand and its metal complexes in gas phase using Hyper chem.8 was preformed.


1971 ◽  
Vol 26 (12) ◽  
pp. 1232-1235 ◽  
Author(s):  
Herbert W. Roesky ◽  
Olaf Petersen

Pyrosulfonyldifluoride reacts with waterfree hydrazine in a molar ratio of 2 : 3 to give hydrazine -1,2-bis(sulfonylfluoride) in a low yield.. The reaction of N-fluorosulfonylamide and SOCl2 yields NH4⊕⊖ N(SO2F)2. This salt is converted to (C6H5)4P⊕⊖N(SO2F)2 in water by (C6H5)4PCl. (CH3)2NNH2 reacts with PSF3, PSF2Br, PSF2CH3 or PSF2C2H5 to yield the following compounds: (CH3)2NNHPSF2, (CH3)2NN (PSF2)2, (CH3)2NNHPSFCH3 and (CH3)2NNHPSFC2H5. The properties and the chemical behaviour of these substances are described. Results of ir-spectra, as well as 31P-, 19F- and 1H-nmr- and mass-spectra and elemental analysis characterize the compounds.


2014 ◽  
Vol 79 (3) ◽  
pp. 291-302 ◽  
Author(s):  
Vukadin Leovac ◽  
Ljiljana Vojinovic-Jesic ◽  
Sonja Ivkovic ◽  
Marko Rodic ◽  
Ljiljana Jovanovic ◽  
...  

The synthesis and structural characterization of a square-planar copper(II) complex with pyridoxal S-methylisothiosemicarbazone (PLITSC) of the formula [Cu(PLITSC?H)H2O]Br?H2O (1) as the first Cu(II) complex with monoanionic form of this ligand were described. Complex 1 together with two previously synthesized complexes [Cu(PLITSC)Br2] (2) and [Cu(PLITSC)Br(MeOH)]Br (3) were characterized by elemental analysis, IR and electronic spectra and also by the methods of thermal analysis, conductometry and magnetochemistry.


2011 ◽  
Vol 228-229 ◽  
pp. 919-924 ◽  
Author(s):  
Feng Yuan Huang

Cellulose Stearate (CS) was synthesized by acylating microcrystalline cellulose (MCC) in homogeneous system with p-toluenesulfonyl chloride (Tos-Cl) and stearic acid (SA). The reactive conditions were discussed. The molar ratio of AGU:SA:Tos-Cl was the key factor which affected the degree of substitution (DS) of CS. In the present paper, CSs with DS ranging from 0.64 to 2.35 were prepared under mild condition. The structure of CS was characterized by FT-IR and 1H-NMR, and DS of CS was determined by traditional saponification method and 1H-NMR, respectively. The solubility of CS was also investigated; the results showed that the higher DS of CS was, the easier CS dissolved in organic solvents. The thermal analysis was measured with DSC, and the results indicated that the glass transition temperature (Tg) and the maximum temperature of thermal decomposition (Tmax) of CS were dependent on DS.


2013 ◽  
Vol 749 ◽  
pp. 521-526
Author(s):  
Si Jiao Wang ◽  
Xiang Rong Liu ◽  
Chao Chao Song ◽  
Shun Shen Zhao ◽  
Lan Ying Yan ◽  
...  

The 2-carboxybenzaldehyde-1H-benzotriazol-1-aceylhydrazone (C16H13N5O3) has been synthesized and used in preparing thirteen novel rare earth complexes. The complexes were characterized by elemental analysis, FT-IR, and UV-Vis, and the formula is RE (C16H11N5O3)·NO3·xH2O·yC2H5OH (RE=La, Ce, Pr, Nd, Sm, Eu, Tb, Ho, Er, Yb) and RE(C16H12N5O3)2·NO3·5H2O (RE=Gd, Dy, Y) .The thermal decomposition processes of the thirteen complexes were studied by thermal gravimetric technology and their apparent activation energy values were calculated by Kissingers and Ozawass method.


2012 ◽  
Vol 9 (3) ◽  
pp. 1135-1144 ◽  
Author(s):  
Mohammad Hossein Nasirtabrizi ◽  
L. Zargin ◽  
S. Khodabandlou ◽  
S. Rostamzadeh Mansour

Free radical polymerization of the resulting monomers methyl methacrylate (MMA), ethyl methacrylate (EMA), methylacrylate (MA) and ethylacrylate (EA) with 2-hydroxyethyl methacrylate (HEMA) (in 1:1 mole ratio) were carried out using azobis(isoboutyronitrile) (AIBN) as initiator at the temperature ranges 60-70°C. The modification of polymers were carried out by 9-anthracenecarboxylic acid (9-ACA) via the esterification reaction between —OH of poly(HEMA) and —COOH of 9-ACA, in presence of N,N′-dicyclohexyl-carbodiimide (DCC), 4-(dimethylamino) pyridine (DMAP) and N,N-dimethyl formamid (DMF). It was found that the molar ratio acid/alcohol/catalysts= 0.02: 0.02: 0.02 and 0.002, optimal for preparation of the ester. As demonstrated by FT-IR,1H-NMR and dynamic mechanical thermal analysis (DMTA). The Tg value of methacrylate and acrylate copolymers containing 9-ACA groups was found to increase with incorporation of 9-ACA groups in polymer structures. The presence of 9-ACA groups in the polymer side chains created new polymers with novel modified properties that find some applications in polymer industry. These anthracenic factors could take part in cyclo addition reaction with other factors such as anhydrides and kinons.


Author(s):  
Ankita A. Bhalu ◽  
Kalpesh Vilapara ◽  
Minaxi Maru ◽  
Manish Shah

N-(3-Bromo-4-hydroxy-5-methoxybenzylidene)-4-Bromobenzenamine was synthesized. This was further used to synthesize Co(II), Ni(II) and Co(II) based metal complexes and characterized by FT-IR, Elemental analysis, ESI Mass and UV spectroscopy.


2021 ◽  
Vol 11 (1) ◽  
pp. 3249-3260

Herein, we describe the synthesis and characterization of a Schiff base ligand (E)-N'-(2-hydroxybenzylidene)-4-methoxybenzohydrazide (HBMB) and its Mn(II), Ni(II), and Cu(II) metal complexes (C1-C3) respectively. The ligand HBMB was synthesized by reacting condensation of salicylaldehyde and 4-methoxy benzohydrazide in a 1:1 molar ratio. The structure of HBMB and its metal complexes (C1-C3) were evaluated by using UV-Vis, FT-IR, 1H-NMR, mass spectroscopy as well as on the basis of elemental analysis, conductivity measurements, and thermogravimetric techniques (TGA). The synthesized molecules' tumoricidal properties were performed against human breast cancer (MCF-7) and colon cancer (HT 29) cell lines. The biological results indicated that the ligand, HBMB, and metal complexes possess dose-dependent selective cytotoxicity against the tested carcinoma cells. The synthesized compounds were further evaluated for their in vitro antimicrobial activities against Gram-positive bacteria (Staphylococcus aureus), Gram-negative bacteria (Escherichia coli), and fungal strains (Aspergillus niger).


2020 ◽  
Vol 2020 ◽  
pp. 1-8 ◽  
Author(s):  
F. K. Ommenya ◽  
E. A. Nyawade ◽  
D. M. Andala ◽  
J. Kinyua

A new series of Mn (II), Co (II), Ni (II), Cu (II), and Zn (II) complexes of the Schiff base ligand, 4-chloro-2-{(E)-[(4-fluorophenyl)imino]methyl}phenol (C13H9ClFNO), was synthesized in a methanolic medium. The Schiff base was derived from the condensation reaction of 5-chlorosalicylaldehyde and 4-fluoroaniline at room temperature. Elemental analysis, FT-IR, UV-Vis, and NMR spectral data, molar conductance measurements, and melting points were used to characterize the Schiff base and the metal complexes. From the elemental analysis data, the metal complexes formed had the general formulae [M(L)2(H2O)2], where L = Schiff base ligand (C13H9ClFNO) and M = Mn, Co, Ni, Cu, and Zn. On the basis of FT-IR, electronic spectra, and NMR data, “O” and “N” donor atoms of the Schiff base ligand participated in coordination with the metal (II) ions, and thus, a six coordinated octahedral geometry for all these complexes was proposed. Molar conductance studies on the complexes indicated they were nonelectrolytic in nature. The Schiff base ligand and its metal (II) complexes were tested in vitro to evaluate their bactericidal activity against Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive bacteria (Bacillus subtilis and Staphylococcus typhi) using the disc diffusion method. The antibacterial evaluation results revealed that the metal (II) complexes exhibited higher antibacterial activity than the free Schiff base ligand.


Sign in / Sign up

Export Citation Format

Share Document