scholarly journals PREPARATION AND IN VITRO EVALUATION OF METOPROLOL-LOADED BOVINE SERUM ALBUMIN NANOPARTICLES

2021 ◽  
pp. 213-217
Author(s):  
SHIVA KUMAR YELLANKI ◽  
SAI MANOJ A ◽  
MANGILAL T
Keyword(s):  
Particle Size ◽  
Bovine Serum Albumin ◽  
Drug Release ◽  
Zeta Potential ◽  
Serum Albumin ◽  
Bovine Serum ◽  
Polymer Concentration ◽  
Entrapment Efficiency ◽  
Nanoprecipitation Method

Objective: The aim of the present research was to prepare metoprolol-loaded nanospheres. Metoprolol-loaded bovine albumin nanospheres were prepared by nanoprecipitation method. Metoprolol is beta-1-adrenergic receptor inhibitor specific to cardiac cells, thus producing negative chronotropic and ionotropic effect. Methods: Metoprolol nanospheres were prepared by nanoprecipitation method, using bovine serum albumin as polymer. The prepared nanospheres are evaluated for particle size evaluation, drug entrapment efficiency, and zeta potential. Drug-excipient compatibility was determined using Fourier-transform infrared spectroscopy. In vitro release and solubility of the drug from nanoparticles were determined. Results: The particle size of prepared metoprolol nanospheres was found to be always less than 200 nm. Maximum particle size was found to be 196±2.03 nm of batch 4 nanoparticles. Entrapment efficiency of prepared nanospheres was above 80% and maximum percentage entrapment efficiency was found to be 80.4±0.51%. It was found that the percentage entrapment efficiency and drug release were extended with increase in polymer concentration. Zeta potential of the optimized formulation was found to be −20.4 mV. In vitro drug release studies have shown the prolonged release of 94.5±0.54 up to 10 h. Drug release rate is extended with an increase in polymer concentration. Conclusion: Results have concluded that the albumin nanospheres loaded with metoprolol have reduced the blood pressure within 24 h and the prepared nanospheres are effective compared to other formulations and drug delivery.

Quality by Design Approach for Development and Optimization of Rifampicin Loaded Bovine Serum Albumin Nanoparticles and Characterization

2021 ◽  
Vol 18 ◽  
Author(s):  
Monica Joshi ◽  
Khushwant S. Yadav ◽  
Bala Prabhakar
Keyword(s):  
Particle Size ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Bovine Serum ◽  
Quality By Design ◽  
Entrapment Efficiency ◽  
Quality Attributes ◽  
Albumin Nanoparticles ◽  
Therapeutic Benefits ◽  
Intravenous Application

Background: Rifampicin is one of the first line drugs used for tuberculosis therapy. The therapy lasts for a long time. Thus, there is a need to develop sustained release formulation of rifampicin for intravenous application. Aim: This study is focused on preparing rifampicin loaded bovine serum albumin nanoparticles (RIF BSA NPs) suitable for intravenous application using systematic quality by design (QbD) approach. Objectives: The main objective of this study is optimizing particle size and entrapment efficiency of rifampicin loaded bovine serum albumin nanoparticles (RIF BSA NPs) and making it suitable for intravenous application using QbD approach. Methods: Quality target product profile was defined along with critical quality attributes (CQAs) for the formulation. 32 factorial design was used for achieving the predetermined values of CQAs, i.e., mean particle size <200 nm and percent entrapment efficiency>50%. Incubation time of drug with colloidal albumin solution and ratio of rifampicin: albumin, were selected as independent variables. Check point analysis was performed to confirm the suitability of regression model for optimization. Results: : The optimized RIF BSA NPs were characterized by FTIR, DSC, 1H NMR techniques. The NPs observed by transmission electron microscopy were spherical in shape. The rifampicin release could be sustained for 72 hours from BSA NPs matrix. RIF BSA NPs dispersion was stable at 5 ± 3°C for 72 hours. Non-toxicity of nanoparticles to RAW 264.7 cell line was proved by MTT assay. Conclusion: Development of RIF BSA NPs with desired quality attributes was possible by implementing QbD approach. The optimized formulation suitable for intravenous application can potentially improve the therapeutic benefits of rifampicin.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals Formulation, Optimization, and Characterization of Repaglinide Loaded Nanocrystal for Diabetes Therapy

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Gajanan Shinde ◽  
Mitesh Patel ◽  
Manan Mehta ◽  
Rajesh Kesarla ◽  
Ganesh Bangale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymer Concentration ◽  
Study Data ◽  
Stability Study ◽  
Diabetes Therapy ◽  
Peg 4000 ◽  
Number Of Cycles

The aim of the present investigation was to formulate and characterize nanocrystal formulation of Repaglinide for diabetes therapy. Formulation was done by high pressure homogenization. HPH pressure and cycles range were screened by preliminary batches (T1 and T2). 5, 8, and 10 cycles and 500 to 1500 bar pressure range had kept for further investigation. Taguchi design was used to optimize type of polymer, % polymer concentration, number of cycles, and HPH pressure for nanocrystal formulation. Formulations were characterized for particle size, zeta potential, and in vitro drug release. Optimized formulation (NC 3) showed particle size of 187 nm, zeta potential of −29.4 mv, and % drug release of 80.58% and it was used for further study. Data analysis proved significant effects of factors on responses. Polydispersity index (PDI) Analysis of optimized formulation were found to be 0.248. SEM showed nanocrystal aggregation of drug, may be due to water removal process. DSC showed slight change in crystallinity, may be due to the presence of PEG 4000. Stability study was carried out for 3 months. It indicated no significant change in particle size and zeta potential. However, further studies in higher animals and human being need to be performed before this formulation can be commercially exploited.

scholarly journals Development and Evaluation of Floating Microspheres of Sumatriptan Succinate using Ethyl Cellulose and Mucilage Extracted from Vigna Mungo

2021 ◽  
pp. 24-36
Author(s):  
Nilesh S. Kulkarni ◽  
Mukta A. Kulkarni ◽  
Rahul H. Khiste ◽  
Mohini C. Upadhye ◽  
Shashikant N. Dhole
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Polymer Concentration ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Vigna Mungo ◽  
Average Particle ◽  
Sumatriptan Succinate

Aim: The present investigation is to formulate and evaluate gastroretentive floating microspheres for sumatriptan succinate. Gastric retention is widely used approach to retain dosage form in stomach and to enhance absorption of drugs. Methods: The gastroretentive floating microspheres was prepared by two different techniques as solvent evaporation and W/O/W multiple emulsion technique. Ethyl cellulose, HPMC K4M polymer and mucilage extracted from Vigna Mungo in various proportions were used for formulation of microspheres. Combination of ethyl acetate and acetone in different proportion was used as organic phase and the microspheres were characterized for particle size, shape, morphology, percentage yield, entrapment efficiency, drug loading, In-Vitro Floating/Buoyancy study, In-vitro Floating/Buoyancy study and release kinetics. Results: The average particle size of all batches was found in the range 100 to 210 μm and the entrapment efficiency of all formulations was found in the range of 17.46 % to 59.28 %.Total floating time for Sumatriptan succinate floating microspheres was observed more than 12 h. The In-Vitro drug release study was performed for all formulations showed drug release in controlled manner. Conclusion: The particle size was increased with increased polymer concentration and it showed that polymer concentration has an impact on the entrapment efficiency. Ethyl cellulose microspheres showed more entrapment and sustained delivery of sumatriptan Succinate than microspheres prepared by combination of Ethyl cellulose: HPMC K4M and Ethyl cellulose: Vigna mungo mucilage.

scholarly journals FORMULATION, DEVELOPMENT AND CHARACTERISATION OF NIMODIPINE LOADED SOLID LIPID NANOPARTICLES

2020 ◽  
pp. 265-271
Author(s):  
REMYA P. N. ◽  
DAMODHARAN N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Stearic Acid ◽  
Palmitic Acid ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release

Objective: The aim of the present study is to develop solid lipid nanoparticles (SLNs) of Nimodipine using hot homogenization followed by ultrasonication technique and to improve the dissolution characteristics of the drug. Methods: The Nimodipine-loaded SLN was prepared using palmitic acid and stearic acid as a lipid matrix and Tween-80 as an emulsifier by a hot homogenization and ultra-sonication method. The physicochemical characteristics of SLN were investigated for entrapment efficiency, zeta potential, in vitro drug release, particle size analysis, Fourier transform infrared studies, scanning electron microscopy, and stability studies. Results: The mean particle size, PDI, Zeta potential and entrapment efficiency of optimized Nimodipine SLN formulation of stearic acid was found to be 119.54 nm, 0.165,-17.60mV, 85% and for palmitic acid was found to be 132.54 nm, 0.155,-17.0mV, 81% respectively. In vitro drug release studies indicated that after an initial burst release, SLN could provide prolonged release of Nimodipine. The selected SLNs have shown good stability for a period of 180 d. Conclusion: SLN formulations showed the best results in EE as well as in vitro drug release and therefore, these results indicate that SLN might be a promising delivery system to enhance the release of Nimodipine.

scholarly journals Design, Development and Evaluation Of Anti-Hypertensive Drug Solid Lipid Nano Particles

2021 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Wide Range

Recently, solid lipid Nano-particles have received much attention by the researchers owing to its biodegradability, biocompatibility and the ability to deliver a wide range of drugs. The aim of the present study was to design Diltiazem solid lipid Nano-particles and to evaluate them. Diltiazem solid lipid Nano-particles were prepared by hot homogenization technique using different lipids (Tristearin, GMS and Comprital), soy lecithin as stabilizers and tween 80, Poloxamer as surfactants. The Nano-particles were evaluated for particle size & PDI, zeta potential, entrapment efficiency and in vitro drug release. The particle size ranged from 49.7 to 523.7 nm. PDI of all formulations were good within the range of 0.189 to 0.427. The zeta potential ranged from -10.5 to -29.6 Mv, Entrapment efficiency of all formulations were observed was in the range of 78.68 to 95.23 %. The cumulative percentage release of Diltiazem from different Diltiazem Nano-particles varied from 53.36 to 88.74% depending upon the drug lipid ratio and the type of lipid used. The average percentage of drug released from different SLNs after 24 hours showed in the following order: F9 (53.35%) < F6 (56.75%) < F4 (61.74%) < F7 (63.8%) < F5(67.77%) < F8(69.04%) < F3(75.31%) < F1(79.36%) <F2 (88.74%) respectively. The release kinetic studies showed that the release was first order diffusion controlled and the n values obtained from the Korsmeyer-Peppa’s model indicated the release mechanism was Quasi-Fickian type (n-value of 0.47). Keywords: Diltiazem, solid lipid Nano-particles, FTIR, in vitro drug release.

scholarly journals The Bovine Serum Albumin Coated Copper Oxide Nanoparticle for Curcumin Delivery in Biological Environment: In-vitro Drug Release

2021 ◽  
Author(s):  
Tahmineh Atloo ◽  
Ramin Mohammadkhani ◽  
Ali Mohammadi ◽  
Kasra Arbabi Zaboli ◽  
Saeed Kaboli ◽  
...  
Keyword(s):  
Bovine Serum Albumin ◽  
Drug Release ◽  
Serum Albumin ◽  
Copper Oxide ◽  
Cell Line ◽  
Bovine Serum ◽  
Copper Oxide Nanoparticles ◽  
Buffer Solution ◽  
Biological Environment

Abstract In this work, first, copper oxide nanoparticles (CUO NPs) were synthesized by physical methods and then coated with the bovine serum albumin (BSA) via biologically meditated minerals to form CUO@BSA NPs. Finally, curcumin (CUR) as an anticancer drug were immobilized on the surface of CUO@BSA NPS. The properties of CUO@BSA-CUR NPS were investigated by FTIR, UV-Vis, TEM, and AFM spectroscopes. It was found that the synthesized CUO@BSA-CUR nanoparticles were spherical with a particle size of 20 to 30 nm and have a sustained release of CUR at 37°C in buffer solution. Also, the result of release in biological environment showed that maximum drug release rate for this nanocarrier in pH 7.4 was measured 75% after 48 hours. The cytotoxicity of CUO@BSA-CUR on MDA-MB-231 cell line was studied. The results showed that CUO@BSA-CUR nanoparticles have significant cytotoxic activity on this cell line, while the results of MTT assay indicated the CUO@BSA NPs have no toxicity effect on the cancer cells.

Sign in / Sign up

Export Citation Format

Share Document