scholarly journals FORMULATION AND OPTIMIZATION OF NIFEDIPINE LOADED NANOCARRIERS

2021 ◽  
pp. 311-317
Author(s):  
ASHWINI JADHAV ◽  
BINOY VARGHESE CHERIYAN
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Physicochemical Characteristics ◽  
Good Choice ◽  
The Stability

Objective: The main aim of this study to formulate a nifedipine-loaded nanocarrier for improving solubility and bioavailability. Methods: To improve the solubility of drug, nifedipine-loaded nanocarrier (lipotomes) were prepared by using the film lipid hydration technique. lipotomes were prepared by using tween 80, which is used for increasing solubility and cetyl alcohol for lipophilic environment. Drug excipients interaction determined by FTIR. lipotomes were characterized for particle size, Entrapment efficiency and zeta potential. lipotomes were optimized by using Design-Expert 12 software. Optimized formula further lyophilized by using different cyroproyectant to improve the stability and oral administration of the drug. Results: FTIR shows there was no interaction between formulation ingredients. Mean particle size, entrapment efficiency, zeta potential was determined and found to be 308.1 nm, 96.7%, 20.1mV, respectively. Surface morphology of lipotomes was observed by a scanning electron microscope (SEM). Optimized lipotomes was lyophilized with Mannitol (8% w/v) was the ideal cryoprotectant to retain the physicochemical characteristics of the OLT formulation after lyophilization. Conclusion: Nifedipine loaded nanocarrier was successfully prepared, using film hydration method. Which have good particle size, EE% and zeta potential. After lyophilization no significant changes was observed in particle size with good physical stability, so it could be a good choice for conventional drug delivery system by doing further investigation as in vitro and in vivo study

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

scholarly journals Nobiletin-loaded composite penetration enhancer vesicles restore the normal miRNA expression and the chief defence antioxidant levels in skin cancer

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mahitab Bayoumi ◽  
Mona G. Arafa ◽  
Maha Nasr ◽  
Omaima A. Sammour
Keyword(s):  
Particle Size ◽  
Skin Cancer ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Penetration Enhancer ◽  
Oxidative Stress Biomarkers ◽  
Skin Deposition

AbstractSkin cancer is one of the most dangerous diseases, leading to massive losses and high death rates worldwide. Topical delivery of nutraceuticals is considered a suitable approach for efficient and safe treatment of skin cancer. Nobiletin; a flavone occurring in citrus fruits has been reported to inhibit proliferation of carcinogenesis since 1990s, is a promising candidate in this regard. Nobiletin was loaded in various vesicular systems to improve its cytotoxicity against skin cancer. Vesicles were prepared using the thin film hydration method, and characterized for particle size, zeta potential, entrapment efficiency, TEM, ex-vivo skin deposition and physical stability. Nobiletin-loaded composite penetration enhancer vesicles (PEVs) and composite transfersomes exhibited particle size 126.70 ± 11.80 nm, 110.10 ± 0.90 nm, zeta potential + 6.10 ± 0.40 mV, + 9.80 ± 2.60 mV, entrapment efficiency 93.50% ± 3.60, 95.60% ± 1.50 and total skin deposition 95.30% ± 3.40, 100.00% ± 2.80, respectively. These formulations were selected for cytotoxicity study on epidermoid carcinoma cell line (A431). Nobiletin-loaded composite PEVs displayed the lowest IC50 value, thus was selected for the in vivo study, where it restored skin condition in DMBA induced skin carcinogenesis mice, as delineated by histological and immuno-histochemical analysis, biochemical assessment of skin oxidative stress biomarkers, in addition to miRNA21 and miRNA29A. The outcomes confirmed that nobiletin- loaded composite PEVs is an efficient delivery system combating skin cancer.

scholarly journals Development and Optimization of Proniosomal Gel Containing Etodolac: In-vitro, Ex-vivo and In-vivo Evaluation

2021 ◽  
Vol 62 (3) ◽  
pp. 290-304
Author(s):  
Moreshwar Patil ◽  
Prashant Pandit ◽  
Pavan Udavant ◽  
Sandeep Sonawane ◽  
Deepak Bhambere
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
In Vivo Evaluation ◽  
Vesicle Size ◽  
Skin Delivery ◽  
The Stability

Introduction: Etodolac is used in the treatment of acute pain and inflammation. It has low solubility because of high hydrophobicity and it is reported that upon oral administration shows gastric disturbances. This encourages the development of topical vesicular formulation. Method: In this work we used coacervation-phase separation method for the development of etodolac loaded vesicular system by using non-ionic surfactants, cholesterol and soya lecithin. Central composite design (rotatble) was used to optimize the concentrations of soy lecithin, surfactant and cholesterol. The prepared formulations were characterized by number of vesicles formed, vesicle size, zeta potential, entrapment efficiency, in-vitro permeation, ex-vivo permeation and anti-inflammatory study. Results: Etodolac was successfully entrapped in all formulations having efficiency in the range of 74.36% to 90.85%, which was more at 4 °C than room temperature. When hydrated with water; niosome in the range of 54 to 141 (per cubic mm) were spontaneously produced. The results of in-vitro diffusion study revealed that etodolac was released in the range of 71.86 to 97.16% over a period of 24 hrs. The average vesicle size of optimized formulation was found 211.9 nm with PDI of 0.5. The observed responses i.e. % encapsulation efficiency and drug release were 74.12 and 95.08 respectively. The zeta potential was -19.4mV revealed the stability of formulation which was further confirmed by no changes in drug content and drug release after stability studies. The % inhibition in paw volume was 40.52% and 43.61% for test and marketed proniosomal gel. Conclusion: Proniosomal gel formulation was stable and could enhance skin delivery of etodolac because of excellent permeation capability of vesicular system.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Optimization of Hydroxypropyl Methylcellulose and Dextrin in Development of Dried Nanosuspension for Poorly Water-Soluble Drug

2020 ◽  
Vol 20 (9) ◽  
pp. 5813-5818
Author(s):  
Eun-Ji Heo ◽  
Sang Yeob Park ◽  
Hye-In Kim ◽  
Ji-Hun Sung ◽  
Hyeok Jin Kwon ◽  
...  
Keyword(s):  
Particle Size ◽  
Dissolution Rate ◽  
Oral Absorption ◽  
Drug Loading ◽  
Hydroxypropyl Methylcellulose ◽  
Physical Stability ◽  
Tween 80 ◽  
Water Soluble

The purpose of this study is to identify the effects of a stabilizer and matrix former in the development of a celecoxib dried nanosuspension (DNS) for high dissolution rate and drug loading. Tween 80 and Hydroxypropyl Methylcellulose (HPMC) were used as stabilizers in the bead-milling process and dextrin was used as the matrix former in the spray-drying. Various nanosuspensions (NS) were prepared by varying the ratio of HPMC and dextrin, and the physicochemical properties of each formulation were evaluated for particle size, morphology, drug loading, crystallinity, redispersibility, physical stability and dissolution rate. HPMC efficiently stabilized the NS system and reduced the particle size of NS. The mean particle size of the NS with 0.5% HPMC (w/v) was the smallest (248 nm) of all formulations. Dextrin has been shown to inhibit the increase of particle size efficiently, which is known to occur frequently when NS is being solidified. As the dextrin increased in DNS, the dissolution rates of reconstituted NS were significantly improved. However, it was confirmed that more than the necessary amount of dextrin in DNS reduced the dissolution and drug loading. The dissolution of celecoxib in DNS prepared at the ratio (drug:dextrin, 1:2.5) was almost the highest. The dissolution of optimal formulation was 95.8% at 120 min, which was 2.0-fold higher than that of NS dried without dextrin. In conclusion, these results suggest that the formulation based on Tween 80, HPMC and dextrin may be an effective option for DNS to enhance its in vitro dissolution and in vivo oral absorption.

scholarly journals Development of Ritonavir Loaded Nanostructured Lipid Carriers Employing Quality By Design (QbD) As A Tool: Characterizations, Permeability, And Bioavailability Studies

2021 ◽  
Author(s):  
Vishal Gurumukhi ◽  
Sanjaykumar Bari
Keyword(s):  
Particle Size ◽  
Quality By Design ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
Formulation Development ◽  
Enhanced Solubility ◽  
Formulation Variables

Abstract The objective of the present work was to optimize ritonavir (RTV) loaded nanostructured lipid carriers (NLCs) to improve bioavailability using quality by design (QbD) based technique. Risk assessment was studied using ‘cause and effect’ diagram followed by failure mode effect analysis (FMEA) to identify the effective high-risk variables for the formulation development. Quality target product profile (QTPP) and critical quality attributes (CQAs) were initially assigned for the proposed product. Central composite rotatable design (CCRD) was used to identify the individual and combined interactions of formulation variables. RTV loaded NLC (RTV-NLC) was prepared using emulsification-ultrasonication method. The effect of formulation variables like ultrasound amplitude, lipid concentration, surfactant concentration on their responses like particle size, polydispersity index (PDI), and entrapment efficiency (EE) were studied by CCRD. The optimized formulation was subjected to lyophilization to obtain dry NLCs for solid-state analysis. DSC and PXRD investigations showed RTV was molecularly dispersed in lipid matrix indicating amorphous form present in the formulation. FESEM and AFM depicted the spherical and uniform particles. The enhanced solubility and dissolution may be attributed due to the reduced particle size. The optimized NLCs showed good physical stability during storage for six months. RTV-NLC was further subjected to in vitro studies and found a successful sustained release rate of 92.37±1.03 %. The parallel artificial membrane permeability assay (PAMPA) and everted gut sac model have demonstrated the permeation enhancement of RTV. In vivo study observed the enhanced bioavailability with 2.86 fold suggesting optimized NLC successfully overcome the issue of solubility.

scholarly journals USE OF LACTIC ACID AND SPAN 80 IN THE FORMULATION OF LIPID BASED IMIQUIMOD VESICLES FOR GENITAL WARTS

2017 ◽  
Vol 9 (2) ◽  
pp. 292
Author(s):  
Saroj Jain ◽  
Anupama Diwan ◽  
Satish Sardana
Keyword(s):  
Particle Size ◽  
Lactic Acid ◽  
Zeta Potential ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Genital Warts ◽  
Formulation Development ◽  
Span 80

<p><strong>Objective: </strong>The objective of present study was formulation development of imiquimod using lactic acid and span 80 for topical delivery to cure genital warts.</p><p><strong>Methods: </strong>Lipid based vesicles (LBV) of 2% imiquimod were prepared with phospholipoin 90G, ethanol, lactic acid and span 80 using central composite design. The prepared vesicles were optimized statistically and characterized for particle size, zeta potential, percentage entrapment efficiency (% EE) and transmission electron microscopy (TEM). The optimized LBV were incorporated into gel formulation which was evaluated and compared with control gel and marketed formulation.</p><p><strong>Results: </strong>The optimized vesicles had particle size 394.8±9.6 nm, zeta potential-16.5±2.5 mV, % EE 88.27±0.45 and TEM study confirmed the formation of vesicular structure with spherical shape. The gel formulation of imiquimod vesicles showed positive results like spreadability 14.3±0.34 gcm/s, viscosity 13500±1.67 cp, consistency 6.1±0.14 mm and extrudability 16.47±0.11 g/cm<sup>2</sup>. <em>In vitro</em> permeation amount of drug was remarkably lower (10.13 %) than control (87.17 %) and marketed formulation (27.46 %). Results of retained drug for both <em>in vitro</em> as well as <em>in vivo</em> permeation study and local accumulation efficiency (4.021±0.2292) were considerably higher for LBV gel than control (0.1008±0.002513) and marketed formulation (0.8314±0.0300). To understand the mechanism of interaction between skin and vesicles, fourier transform infra-red spectroscopy studies were also done. Results of skin irritancy test and histological examination revealed biocompatible nature of formulation.</p><p><strong>Conclusion: </strong>Results of <em>in vitro </em>and <em>in vivo</em> studies indicated that this vesicle gel formulation provided efficient and site specific dermal delivery of imiquimod for cure of genital warts.</p>

scholarly journals COMPARATIVE MUCOPENETRATION ABILITY OF METRONIDAZOLE LOADED CHITOSAN AND PEGYLATED CHITOSAN NANOPARTICLES

2017 ◽  
Vol 10 (6) ◽  
pp. 125
Author(s):  
Sukhbir Kaur ◽  
Chawla V ◽  
Narang R K ◽  
Aggarwal G
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Chitosan Nanoparticles ◽  
Methyl Cellulose ◽  
Fluorescein Isothiocyanate ◽  
Entrapment Efficiency ◽  
Spherical Particles ◽  
Detachment Force

Objective: The objective of this study is to compare the mucopenetration ability of metronidazole loaded chitosan (CS) and pegylated CS nanoparticles.Methods: Nanoparticles were prepared by ionic gelation technique using negatively charged pH sensitive polymer, hydroxyl propyl methyl cellulose phthalate with positively charged CS and methoxy polyethylene glycol-grafted-CS (mPEG-g-CS). mPEG-g-CS was synthesized by formaldehyde linkage method and characterized by Fourier transform infrared spectroscopy. The optimized formulations were compared for morphology, particle size, polydispersity index (PDI), entrapment efficiency, bioadhesion detachment force, in vitro and in vivo mucopenetration for CS-mPEG-g-CS nanoparticles.Results: The morphological assessment revealed smooth spherical particles with uniform dispersions. The optimized formulations particle size was found to be 202.7±27 nm and 294.1±46 nm, zeta potential 26.94±2.4 mV and 6.0±1.3 mV. PDI 0.231 and 0.268, entrapment efficiency 79.8±5.4% and 83.6±9.7%, bio-adhesion detachment force 14.98*103 dyne/cm2 and 10.67*103 dynes/cm2, in vitro mucopenetration 78% and 98% for CS-mPEG-g-CS, respectively. The qualitative in vivo mucopenetration result confirms retention of fluorescein isothiocyanate (FITC) labeled mPEG-g-CS nanoparticles till 24 hrs.Conclusion: Nanoparticles with lesser zeta potential and mucoadhesion showed higher mucosal penetration which is evident from FITC labeled histopathological mucus penetration test. Studies thus provided evidence that planned pharmaceutical strategies open new vistas for effective treatment of mucosal infections.

scholarly journals PHYSICAL STABILITY TESTING OF P-SYNEPHRINE PREPARED AS TRANSFERSOME GEL

2017 ◽  
Vol 9 ◽  
pp. 124
Author(s):  
Amelia Luthfiah ◽  
Erny Sagita ◽  
Iskandarsyah Iskandarsyah
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Oral Bioavailability ◽  
Lipolytic Activity ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Polydispersity Index ◽  
Stability Testing ◽  
Span 80

Objectives: While p-synephrine exhibits lipolytic activity, it also has a low oral bioavailability as well as hydrophilic characteristic, so it is difficult forit to penetrate the epidermis if it is made into transdermal preparation. The purpose of this research was to increase the penetration of p-synephrineby preparing it as transfersome gel.Materials and Methods: Three transfersome formulas were prepared—F1, F2, and F3—with the surfactants used at Tween 80, Span 80, and thecombination of Tween 80 and Span 80 with a ratio of 1:1, respectively.Results: The results showed that F1 was the best formula, with the highest entrapment efficiency, of 64.058±0.754%, a particle size average of103.3 nm, polydispersity index 0.269±0.05, and zeta potential of −36.2±0.64 mV, so this formula was employed for the gel formulation. Two gelformulas were then prepared, transfersome gel (GT) and non transfersome gel (GNT).Conclusions: The two gels were evaluated for their physical stability, and GT was found to be more stable than GNT.

scholarly journals Andrographolide-loaded ethosomal gel for transdermal application: Formulation and in vitro penetration study

2021 ◽  
Author(s):  
Nooryza Martihandini ◽  
Silvia Surini ◽  
Anton Bahtiar
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Transdermal Delivery ◽  
Weight Ratio ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Transmission Electron Micrograph ◽  
C 30 ◽  
The Stability

Background: Andrographolide is a phytoconstituent with anti-inflammatory activity, however, the compound’s poor oral bioavailability has hindered its effective formulation for oral administration. This study, therefore, aims to develop an ethosome for improving andrographolide penetration through the transdermal delivery system. Methods: This study developed 3 ethosome formulas with different andrographolide-phospholipid weight ratios (1:8, 1:9; 1:10), using the thin-layer dispersion-sonication method. Subsequently, the ethosomes were evaluated for particle size, polydispersity index, zeta potential, morphology, as well as entrapment efficiency, and incorporated into a gel dosage form. Subsequently, an in vitro penetration study was performed using Franz diffusion cells for 24 hours and the stability of the gels at 5 ± 2°C, 30 ± 2°C, and 40 ± 2°C, were studied for 3 months. Results: The results showed the optimal formula was E2, a 1:9 weight ratio formula of andrographolide and phospholipid. Based on the transmission electron micrograph, E2 possessed unilamellar, as well as spherical-shaped vesicles, and exhibited superior characteristics for transdermal delivery, with a particle size of 89.95 ± 0.75 nm, polydispersity index of 0.254 ± 0.020, a zeta potential of -39.3 ± 0.82 mV, and entrapment efficiency of 97.89 ± 0.02%. Furthermore, the cumulative andrographolide penetration and transdermal flux for the ethosomal gel of E2 (EG2) were 129.25 ± 4.66 µg/cm2 and 5.16 ± 0.10 µg/cm2/hours, respectively. All the ethosomal gel formulations exhibited improved penetration enhancement of andrographolide, compared to the nonethosomal formulations. Also, the andrographolide levels in the ethosomal and nonethosomal gels after 3 months ranged from 98.13 to 104.19%, 97.93 to 104.01%, and 97.23 to 102.26% at storage temperatures of 5 ± 2°C, 30 ± 2°C/RH 65% ± 5%, and 40 ± 2°C/RH 75% ± 5%, respectively. Conclusions: This study concluded that encapsulation into ethosome enhances andrographolide delivery through the skin.

Sign in / Sign up

Export Citation Format

Share Document