Promising use of high-strength nitrogen steel for the ice belt of marine machinery operating in the extreme arctic conditions

2021 ◽  
pp. 229-237
Author(s):  
A. A. Deev ◽  
G. Yu. Kalinin ◽  
K. E. Sadkin
Keyword(s):  
Physical And Mechanical Properties ◽  
High Strength ◽  
The Arctic ◽  
Welded Steel ◽  
Corrosion Resistant ◽  
Critical Elements ◽  
Steel Sheets ◽  
Nitrogen Steel ◽  
Arctic Conditions ◽  
Clad Steel

This article shows the possibility of using high-strength nitrogen-containing corrosion-resistant steel grade 04Kh20N6G11M2AFB for the construction of critical elements and units of marine equipment operating at low temperatures, including the Arctic. The advantages of nitrogen-containing steel over clad steel AB2 + 08Kh18N10T always used in shipbuilding and welded steel of F500W category are considered. According to the assessment of testing of homogeneous nitrogen steel sheets, the level of its physical and mechanical properties exceeds the analogous parameters of traditional AB2 + 08Kh18N10T steels in a wide temperature range, up to –90°C.

Physical, Chemical, and Crystallographic Characterization of Anodic Coatings on High Strength Aluminum Base Alloys

1976 ◽  
Vol 34 ◽  
pp. 636-637
Author(s):  
R. E. Herfert ◽  
N. T. McDevitt
Keyword(s):  
Sulfuric Acid ◽  
Salt Spray ◽  
High Strength ◽  
Environmental Stability ◽  
Anodic Films ◽  
Sodium Dichromate ◽  
Corrosion Resistant ◽  
Aerospace Applications ◽  
Bond Strengths ◽  
Adhesive Bonded Joints

Durability of adhesive bonded joints in moisture and salt spray environments is essential to USAF aircraft. Structural bonding technology for aerospace applications has depended for many years on the preparation of aluminum surfaces by a sulfuric acid/sodium dichromate (FPL etch) treatment. Recently, specific thin film anodizing techniques, phosphoric acid, and chromic acid anodizing have been developed which not only provide good initial bond strengths but vastly improved environmental durability. These thin anodic films are in contrast to the commonly used thick anodic films such as the sulfuric acid or "hard" sulfuric acid anodic films which are highly corrosion resistant in themselves, but which do not provide good initial bond strengths, particularly in low temperature peel.The objective of this study was to determine the characteristics of anodic films on aluminum alloys that make them corrosion resistant. The chemical composition, physical morphology and structure, and mechanical properties of the thin oxide films were to be defined and correlated with the environmental stability of these surfaces in humidity and salt spray. It is anticipated that anodic film characteristics and corrosion resistance will vary with the anodizing processing conditions.

COMPARATIVE CHARACTERISTICS OF PHYSICAL AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS AND HIGH-STRENGTH STEEL 30FGSN2A

2020 ◽  
Author(s):  
I.R. Antypes ◽  
◽  
V.V. Zaitsev ◽  
Keyword(s):  
Composite Materials ◽  
High Strength Steel ◽  
Critical Stress ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Aviation Industry ◽  
Specific Strength ◽  
Aircraft Landing ◽  
Carbon Plastics ◽  
Aircraft Landing Gear

Currently, the use of composite materials is increasingly used in various areas of the national economy, including the aviation industry. The materials of this article are devoted to the study of the use of composite materials for the manufacture of aircraft landing gear in comparison with the traditionally used brand of steel. As a result of the work carried out, it was found that the slope made of carbon fiber showed a critical stress twice as high as its design made of 30xgsn2a steel. In addition, carbon plastics are superior to high-strength steel in terms of specific strength, stiffness, and tensile strength.

SANICRO 41

Alloy Digest ◽  
1995 ◽  
Vol 44 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Oil And Gas ◽  
High Strength ◽  
Heat Treating ◽  
Gas Production ◽  
Oil And Gas Production ◽  
Corrosion Resistant ◽  
Corrosion Resistant Alloy ◽  
Nickel Base

Abstract SANDVIK SANICRO 41 is a nickel-base corrosion resistant alloy with a composition balanced to resist both oxidizing and reducing environments. A high-strength version (110) is available for oil and gas production. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-475. Producer or source: Sandvik.

ALCOA 7150-T7751 and T77511

Alloy Digest ◽  
2015 ◽  
Vol 64 (4) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
High Strength ◽  
Static Strength ◽  
Corrosion Resistant ◽  
Overaged Condition

Abstract This producer has pioneered the development of the -T77 temper, a high strength corrosion resistant temper for Alloy 7150 plate and extrusions. Alloy 7150-T77 provides weight savings opportunities in structure governed by static strength requirements but where "overaged" condition corrosion resistance is required. This datasheet provides information on composition, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as forming. Filing Code: Al-442. Producer or source: Alcoa Mill Products Inc..

NIBRON SPECIAL

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Marine Environments ◽  
Corrosion Resistant

Abstract Nibron Special is an extra high-strength nickel bronze that is corrosion resistant in both marine environments and industrial media. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Cu-844. Producer or source: Columbia Metals Ltd.

EVERDUR-637

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant

Abstract EVERDUR-637 is a high-strength, corrosion resistant copper alloy containing silicon and aluminum. It is also characterized by its good forging and machining qualities. It is recommended for fasteners, valve stems, marine hardware, cable connectors, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-183. Producer or source: Anaconda American Brass Company.

PROMET 115N

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Nickel Aluminum ◽  
Corrosion Resistant ◽  
Nickel Aluminum Bronze

Abstract PROMET-115N is a heat treatable nickel-aluminum bronze recommended for corrosion resistant, high strength bearings, gears and castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-175. Producer or source: American Crucible Products Company.

REYNOLDS R-301

Alloy Digest ◽  
1954 ◽  
Vol 3 (5) ◽  
Keyword(s):  
Composite Material ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Bearing Strength ◽  
High Strength Aluminum Alloy

Abstract Reynolds R301 is a composite material, constituted of a core of high strength aluminum alloy, clad with a corrosion-resistant aluminum alloy. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-16. Producer or source: Reynolds Metals Company.

AISI No. 633

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Martensitic Stainless Steels ◽  
Steel Mills ◽  
Temperature Performance ◽  
Structural Applications

Abstract AISI No. 633 is a chromium-nickel-molybdenum stainless steel whose properties can be changed by heat treatment. It bridges the gap between the austenitic and martensitic stainless steels; that is, it has some of the properties of each. Its uses include high-strength structural applications, corrosion-resistant springs and knife blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-389. Producer or source: Stainless steel mills.

ALLEGHENY LUDLUM AL 29-4C

Alloy Digest ◽  
1993 ◽  
Vol 42 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Exchangers ◽  
Power Plants ◽  
High Strength ◽  
Corrosion Resistant ◽  
Resistant Alloy ◽  
Corrosion Resistant Alloy ◽  
Geothermal Power

Abstract AL 29-4C is a highly corrosion resistant alloy with a relatively high strength. This combination allows the use of lighter gage tubes, and has led to its use in the brine heat exchangers of geothermal power plants. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-554. Producer or source: Allegheny Ludlum Corporation.

Sign in / Sign up

Export Citation Format

Share Document