scholarly journals Optimization of pulverised coal combustion by means of CFD/CTA modeling

2006 ◽  
Vol 10 (3) ◽  
pp. 161-179 ◽  
Author(s):  
Risto Filkoski ◽  
Ilija Petrovski ◽  
Piotr Karas

The objective of the work presented in this paper was to apply a method for handling two-phase reacting flow for prediction of pulverized coal combustion in large-scale boiler furnace and to assess the ability of the model to predict existing power plant data. The paper presents the principal steps and results of the numerical modeling of power boiler furnace with tangential disposition of the burners. The computational fluid dynamics/computational thermal analysis (CFD/CTA) approach is utilized for creation of a three-dimensional model of the boiler furnace, including the platen superheater in the upper part of the furnace. Standard k-e model is employed for description of the turbulent flow. Coal combustion is modeled by the mixture fraction/probability density function approach for the reaction chemistry, with equilibrium assumption applied for description of the system chemistry. Radiation heat transfer is computed by means of the simplified P-N model, based on the expansion of the radiation intensity into an orthogonal series of spherical harmonics. Some distinctive results regarding the examined boiler performance in capacity range between 65 and 95% are presented graphically. Comparing the simulation predictions and available site measurements concerning temperature, heat flux and combustion efficiency, a conclusion can be drawn that the model produces realistic insight into the furnace processes. Qualitative agreement indicates reasonability of the calculations and validates the employed sub-models. After the validation and verification of the model it was used to check the combustion efficiency as a function of coal dust sieve characteristics, as well as the impact of burners modification with introduction of over fire air ports to the appearance of incomplete combustion, including CO concentration, as well as to the NOx concentration. The described case and other experiences with CFD/CTA stress the advantages of numerical modeling and simulation over a purely field data study, such as the ability to quickly analyze a variety of design options without modifying the object and the availability of significantly more data to interpret the results. .

Author(s):  
K.M. Moiseeva ◽  
◽  
A.Yu. Krainov ◽  
E.I. Rozhkova ◽  
◽  
...  

Swirling combustion is currently one of the most important engineering problems in physics of combustion. There is a hypothesis on the increase in the combustion efficiency of reacting gas mixtures in combustion chambers with swirling flows, as well as on the increase in the efficiency of fuel combustion devices. In this paper, it is proposed to simulate a swirling flow by taking into account the angular component of the flow velocity. The aim of the study is to determine the effect of the angular component of the flow velocity on the characteristics of the flow and combustion of an air suspension of coal dust in a pipe. The problem is solved in a twodimensional axisymmetric approximation with allowance for a swirling flow. A physical and mathematical model is based on the approaches of the mechanics of multiphase reacting media. A solution method involves the arbitrary discontinuity decay algorithm. The impact of the flow swirl and the size of coal dust particles on the gas temperature distribution along the pipe is determined.


2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Akram Mohammad ◽  

In the present computational study, the impact of strut positions and the effect of inlet Mach numbers on the combustion efficiency are investigated in a strut-based supersonic combustor. An experimentally investigated model combustor developed at the German Aerospace Center (DLR) is simulated and validated. Then, a model combustor with three struts placed at different positions is investigated. Two-dimensional, compressible, reacting-flow governing equations are solved along with single-step chemistry reaction and k-ω SST turbulence model using a commercial CFD code FLUENT. The oblique shock from the struts has a profound influence on the mixing and combustion process. The H2O mole fraction, H2 mole fraction contours, and combustion efficiency of various configurations are compared for finding better mixing and flame stabilization. The combustion efficiency reduces when the two struts are located in farther downstream or placed at the same downstream location. At higher Mach numbers, the combustion is delayed, and the mixing of fuel with the supersonic mainstream is incomplete.


2020 ◽  
Vol 59 (04) ◽  
pp. 294-299 ◽  
Author(s):  
Lutz S. Freudenberg ◽  
Ulf Dittmer ◽  
Ken Herrmann

Abstract Introduction Preparations of health systems to accommodate large number of severely ill COVID-19 patients in March/April 2020 has a significant impact on nuclear medicine departments. Materials and Methods A web-based questionnaire was designed to differentiate the impact of the pandemic on inpatient and outpatient nuclear medicine operations and on public versus private health systems, respectively. Questions were addressing the following issues: impact on nuclear medicine diagnostics and therapy, use of recommendations, personal protective equipment, and organizational adaptations. The survey was available for 6 days and closed on April 20, 2020. Results 113 complete responses were recorded. Nearly all participants (97 %) report a decline of nuclear medicine diagnostic procedures. The mean reduction in the last three weeks for PET/CT, scintigraphies of bone, myocardium, lung thyroid, sentinel lymph-node are –14.4 %, –47.2 %, –47.5 %, –40.7 %, –58.4 %, and –25.2 % respectively. Furthermore, 76 % of the participants report a reduction in therapies especially for benign thyroid disease (-41.8 %) and radiosynoviorthesis (–53.8 %) while tumor therapies remained mainly stable. 48 % of the participants report a shortage of personal protective equipment. Conclusions Nuclear medicine services are notably reduced 3 weeks after the SARS-CoV-2 pandemic reached Germany, Austria and Switzerland on a large scale. We must be aware that the current crisis will also have a significant economic impact on the healthcare system. As the survey cannot adapt to daily dynamic changes in priorities, it serves as a first snapshot requiring follow-up studies and comparisons with other countries and regions.


2020 ◽  
Vol 6 (5) ◽  
pp. 1183-1189
Author(s):  
Dr. Tridibesh Tripathy ◽  
Dr. Umakant Prusty ◽  
Dr. Chintamani Nayak ◽  
Dr. Rakesh Dwivedi ◽  
Dr. Mohini Gautam

The current article of Uttar Pradesh (UP) is about the ASHAs who are the daughters-in-law of a family that resides in the same community that they serve as the grassroots health worker since 2005 when the NRHM was introduced in the Empowered Action Group (EAG) states. UP is one such Empowered Action Group (EAG) state. The current study explores the actual responses of Recently Delivered Women (RDW) on their visits during the first month of their recent delivery. From the catchment area of each of the 250 ASHAs, two RDWs were selected who had a child in the age group of 3 to 6 months during the survey. The response profiles of the RDWs on the post- delivery first month visits are dwelled upon to evolve a picture representing the entire state of UP. The relevance of the study assumes significance as detailed data on the modalities of postnatal visits are available but not exclusively for the first month period of their recent delivery. The details of the post-delivery first month period related visits are not available even in large scale surveys like National Family Health Survey 4 done in 2015-16. The current study gives an insight in to these visits with a five-point approach i.e. type of personnel doing the visit, frequency of the visits, visits done in a particular week from among those four weeks separately for the three visits separately. The current study is basically regarding the summary of this Penta approach for the post- delivery one-month period.     The first month period after each delivery deals with 70% of the time of the postnatal period & the entire neonatal period. Therefore, it does impact the Maternal Mortality Rate & Ratio (MMR) & the Neonatal Mortality Rates (NMR) in India and especially in UP through the unsafe Maternal & Neonatal practices in the first month period after delivery. The current MM Rate of UP is 20.1 & MM Ratio is 216 whereas the MM ratio is 122 in India (SRS, 2019). The Sample Registration System (SRS) report also mentions that the Life Time Risk (LTR) of a woman in pregnancy is 0.7% which is the highest in the nation (SRS, 2019). This means it is very risky to give birth in UP in comparison to other regions in the country (SRS, 2019). This risk is at the peak in the first month period after each delivery. Similarly, the current NMR in India is 23 per 1000 livebirths (UNIGME,2018). As NMR data is not available separately for states, the national level data also hold good for the states and that’s how for the state of UP as well. These mortalities are the impact indicators and such indicators can be reduced through long drawn processes that includes effective and timely visits to RDWs especially in the first month period after delivery. This would help in making their post-natal & neonatal stage safe. This is the area of post-delivery first month visit profile detailing that the current article helps in popping out in relation to the recent delivery of the respondents.   A total of four districts of Uttar Pradesh were selected purposively for the study and the data collection was conducted in the villages of the respective districts with the help of a pre-tested structured interview schedule with both close-ended and open-ended questions.  The current article deals with five close ended questions with options, two for the type of personnel & frequency while the other three are for each of the three visits in the first month after the recent delivery of respondents. In addition, in-depth interviews were also conducted amongst the RDWs and a total 500 respondents had participated in the study.   Among the districts related to this article, the results showed that ASHA was the type of personnel who did the majority of visits in all the four districts. On the other hand, 25-40% of RDWs in all the 4 districts replied that they did not receive any visit within the first month of their recent delivery. Regarding frequency, most of the RDWs in all the 4 districts received 1-2 times visits by ASHAs.   Regarding the first visit, it was found that the ASHAs of Barabanki and Gonda visited less percentage of RDWs in the first week after delivery. Similarly, the second visit revealed that about 1.2% RDWs in Banda district could not recall about the visit. Further on the second visit, the RDWs responded that most of them in 3 districts except Gonda district did receive the second postnatal visit in 7-15 days after their recent delivery. Less than half of RDWs in Barabanki district & just more than half of RDWs in Gonda district received the third visit in 15-21 days period after delivery. For the same period, the majority of RDWs in the rest two districts responded that they had been entertained through a home visit.


e-Finanse ◽  
2018 ◽  
Vol 14 (4) ◽  
pp. 67-76
Author(s):  
Piotr Bartkiewicz

AbstractThe article presents the results of the review of the empirical literature regarding the impact of quantitative easing (QE) on emerging markets (EMs). The subject is of interest to policymakers and researchers due to the increasingly larger role of EMs in the world economy and the large-scale capital flows occurring after 2009. The review is conducted in a systematic manner and takes into consideration different methodological choices, samples and measurement issues. The paper puts the summarized results in the context of transmission channels identified in the literature. There are few distinct methodological approaches present in the literature. While there is a consensus regarding the direction of the impact of QE on EMs, its size and durability have not yet been assessed with sufficient precision. In addition, there are clear gaps in the empirical findings, not least related to relative underrepresentation of the CEE region (in particular, Poland).


Sign in / Sign up

Export Citation Format

Share Document