COMBUSTION OF A GAS SUSPENSION OF COAL DUST IN A SWIRLING FLOW

2021 ◽  
pp. 139-147
Author(s):  
K.M. Moiseeva ◽  
◽  
A.Yu. Krainov ◽  
E.I. Rozhkova ◽  
◽  
...  
Keyword(s):  
Flow Velocity ◽  
Swirling Flow ◽  
Coal Dust ◽  
Combustion Efficiency ◽  
Dust Particles ◽  
Gas Temperature ◽  
Flow Swirl ◽  
Angular Component ◽  
Air Suspension ◽  
The Impact

Swirling combustion is currently one of the most important engineering problems in physics of combustion. There is a hypothesis on the increase in the combustion efficiency of reacting gas mixtures in combustion chambers with swirling flows, as well as on the increase in the efficiency of fuel combustion devices. In this paper, it is proposed to simulate a swirling flow by taking into account the angular component of the flow velocity. The aim of the study is to determine the effect of the angular component of the flow velocity on the characteristics of the flow and combustion of an air suspension of coal dust in a pipe. The problem is solved in a twodimensional axisymmetric approximation with allowance for a swirling flow. A physical and mathematical model is based on the approaches of the mechanics of multiphase reacting media. A solution method involves the arbitrary discontinuity decay algorithm. The impact of the flow swirl and the size of coal dust particles on the gas temperature distribution along the pipe is determined.

The Research of the Swirling Flow of the Power Fluid during its Passing through the Hydrodynamic Cavitator

2020 ◽  
pp. 53-71
Author(s):  
Ya. Ya. Yakymechko ◽  
Ya. М. Femiak
Keyword(s):  
Flow Rate ◽  
Vibration Frequency ◽  
Vortex Core ◽  
Swirling Flow ◽  
Theoretical Research ◽  
Theoretical Dependence ◽  
Flow Swirl ◽  
Precessing Vortex Core ◽  
Speed Fluctuation ◽  
The Impact

The article presents the theoretical research of the use of swirling flows with reverse jets and with developed precessing vortex core in cavitators and other devices. While describing the motion of the vortex core in the free swirling jet of the fluid it is necessary to take into account that according to the experimental data the vortex core can swirl along the length of the jet and moves around the jet axis in the zone between the area of reverse flows and the boundary outer layer. In this case, it is the vortex core which is under the influence of the basic swirling flow. Herewith, it is necessary to take into account that due to commensurate sizes of the vortex core and the jet, the impact on the core will be different owing to non-uniform distribution of speeds in the jet itself. On the basis of the known formulas, the authors have deduced the improved theoretical dependence of the degree of flow swirl on the flow rate, the vortex core vibration frequency and structural parameters under the conditions of the consistency of swirling flow itself. The theoretical dependence shows that the degree of flow swirl is directly proportional to the precessing vortex core vibration frequency and inversely proportional to the square of mass flow rate. Thus, ensuring the consistency of the swirling flow with varying flow-rate requires the corresponding change of the swirl degree or the influence on the frequency of vibrations of the precessing vortex core. On the basis of the deduced theoretical dependences, the authors have developed and implemented in the computer programs the following calculations: the dependence of the coefficient of the flow swirl on the vortex core vibration frequency; the simulation of the precession of the vortex core in the swirling flow; the research of speed fluctuation in the swirling flow; speed fluctuation during the interaction of swirling jets.  

scholarly journals Comparative Assessment of Spray Behavior, Combustion and Engine Performance of ABE-Biodiesel/Diesel as Fuel in DI Diesel Engine

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6521
Author(s):  
Sattar Jabbar Murad Algayyim ◽  
Andrew P. Wandel
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Engine Performance ◽  
Combustion Efficiency ◽  
Green Energy ◽  
Spray Parameters ◽  
Gas Temperature ◽  
Performance And Emission ◽  
The Impact ◽  
Ci Engines

This study investigates the impact of an acetone-butanol-ethanol (ABE) mixture on spray parameters, engine performance and emission levels of neat cottonseed biodiesel and neat diesel blends. The spray test was carried out using a high-speed camera, and the engine test was conducted on a variable compression diesel engine. Adding an ABE blend can increase the spray penetration of both neat biodiesel and diesel due to the low viscosity and surface tension, thereby enhancing the vaporization rate and combustion efficiency. A maximum in-cylinder pressure value was recorded for the ABE-diesel blend. The brake power (BP) of all ABE blends was slightly reduced due to the low heating values of ABE blends. Exhaust gas temperature (EGT), nitrogen oxides (NOx) and carbon monoxide (CO) emissions were also reduced with the addition of the ABE blend to neat diesel and biodiesel by 14–17%, 11–13% and 25–54%, respectively, compared to neat diesel. Unburnt hydrocarbon (UHC) emissions were reduced with the addition of ABE to diesel by 13%, while UHC emissions were increased with the addition of ABE to biodiesel blend by 25–34% compared to neat diesel. It can be concluded that the ABE mixture is a good additive blend to neat diesel rather than neat biodiesel for improving diesel properties by using green energy for compression ignition (CI) engines with no or minor modifications.

scholarly journals Optimization of pulverised coal combustion by means of CFD/CTA modeling

2006 ◽  
Vol 10 (3) ◽  
pp. 161-179 ◽  
Author(s):  
Risto Filkoski ◽  
Ilija Petrovski ◽  
Piotr Karas
Keyword(s):  
Numerical Modeling ◽  
Coal Combustion ◽  
Large Scale ◽  
Coal Dust ◽  
Mixture Fraction ◽  
Combustion Efficiency ◽  
Reacting Flow ◽  
Three Dimensional Model ◽  
Boiler Furnace ◽  
The Impact

The objective of the work presented in this paper was to apply a method for handling two-phase reacting flow for prediction of pulverized coal combustion in large-scale boiler furnace and to assess the ability of the model to predict existing power plant data. The paper presents the principal steps and results of the numerical modeling of power boiler furnace with tangential disposition of the burners. The computational fluid dynamics/computational thermal analysis (CFD/CTA) approach is utilized for creation of a three-dimensional model of the boiler furnace, including the platen superheater in the upper part of the furnace. Standard k-e model is employed for description of the turbulent flow. Coal combustion is modeled by the mixture fraction/probability density function approach for the reaction chemistry, with equilibrium assumption applied for description of the system chemistry. Radiation heat transfer is computed by means of the simplified P-N model, based on the expansion of the radiation intensity into an orthogonal series of spherical harmonics. Some distinctive results regarding the examined boiler performance in capacity range between 65 and 95% are presented graphically. Comparing the simulation predictions and available site measurements concerning temperature, heat flux and combustion efficiency, a conclusion can be drawn that the model produces realistic insight into the furnace processes. Qualitative agreement indicates reasonability of the calculations and validates the employed sub-models. After the validation and verification of the model it was used to check the combustion efficiency as a function of coal dust sieve characteristics, as well as the impact of burners modification with introduction of over fire air ports to the appearance of incomplete combustion, including CO concentration, as well as to the NOx concentration. The described case and other experiences with CFD/CTA stress the advantages of numerical modeling and simulation over a purely field data study, such as the ability to quickly analyze a variety of design options without modifying the object and the availability of significantly more data to interpret the results. .

An Investigation of the Influence of Fluidics Insertion Technique on Acetylene/Argon Gas Additives to LPG on the Turbulent Lean Premixed Flame Characteristics for an EV Burner

2018 ◽  
Author(s):  
Sameh H. Hassan ◽  
Ahmed A. Emara ◽  
Mahmoud A. Elkady
Keyword(s):  
Combustion Efficiency ◽  
Flame Stabilization ◽  
Operating Conditions ◽  
Experimental Program ◽  
Temperature Profiles ◽  
Liquefied Petroleum Gas ◽  
Gas Temperature ◽  
Lean Premixed ◽  
The Impact ◽  
Ev Burner

A series of experiments were performed on a vertical EV burner with a constant coflow air of 873 L /min to generate turbulent lean premixed flow in order to study the impact of the addition of Acetylene/Argon mixture to the liquefied petroleum gas (LPG) on the temperature field and flame structure. The fluidics mechanism was inserted at a fixed position inside the entry section of the EV burner assembly. The flow rates of fuel (LPG/C2H2/ Ar) and air were measured using calibrated rotameters. The different volume ratios of the fuel constituents (at a specified fuel flow rate) were admitted via three solenoid valves at the entry section of each stream prior to mixing and monitored using a labview program. The axial temperature profiles at different operating conditions were measured using a bare wire Pt-Pt -10% Rh (type S) thermocouple of wire diameter 250 μm. Flame images were obtained — before and after fluidics insertion — using a high resolution Canon 6D 20MP digital camera. The selection of the different considerated cases was based on flame stability. The experimental program aims at identifying and analyzing the changes in flame characteristics (flame length, axial profiles of mean gas temperature, NOx concentration and overall combustion efficiency) resulting from the insertion of fluidics while considering different proportions of the fuel constituents) (including pure LPG, as a reference case). In all experiments flame stabilization was ensured. The results obtained indicate the following: it was noticed that in most cases of pure LPG only, and other mixtures the images shows increase in both the length and luminosity of the flame as a result of higher degrees of swirl due to the fluidics insertion while the temperature profiles of the different flames were changed. It was indicated that NOx trend was decreased by 52% while the combustion efficiency was improved by 2.5%.

scholarly journals Characteristic Study of Visible Light Communication and Influence of Coal Dust Particles in Underground Coal Mines

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 883
Author(s):  
Fawad Javaid ◽  
Anyi Wang ◽  
Muhammad Usman Sana ◽  
Asif Husain ◽  
Imran Ashraf
Keyword(s):  
Visible Light ◽  
Light Transmission ◽  
Coal Dust ◽  
Coal Mines ◽  
Visible Light Communication ◽  
Underground Mines ◽  
Dust Particles ◽  
Delay Spread ◽  
Underground Coal Mines ◽  
The Impact

The critical environment of the underground mines is a risky zone for mining applications and it is very hazardous to engage the miners without a sophisticated communication system. The existing wired networks are susceptible to damage and the wireless radio systems experience severe fading that restricts the complete access to the entire assembly of a mine. Wireless optical communication is a better approach that can be incorporated in the erratic atmosphere of underground mines to overcome such issues, as lights are already used to illuminate the mine galleries. This study is focused on investigating the characteristics of visible light communication (VLC) in an underground coal mine. The entire scope of VLC is elaborated along with the influence of coal dust particles and the scattering model. The impact of coal dust clouds on visibility and attenuation is analyzed for visible light transmission. The shadowing effect generated by the pillars and mining machinery is estimated by employing the bimodal Gaussian distribution (BGD) approach in coal mines. The characteristic model of VLC for underground coal mines is presented by classifying the area of the mine into mine gallery and sub-galleries. The transmission links of VLC are categorized as the line of sight (LOS) link for direct propagation and the non-LOS (NLOS) link for reflected propagation. The scenarios of LOS and NLOS propagation are considered for each evaluating parameter. Furthermore, the performance of the proposed framework is examined by computing the received signal power, path loss, delay spread (DS), and signal to noise ratio (SNR).

INFLUENCE OF FLOW SWIRLING ON COMBUSTION OF ALUMINUM POWDER AEROSUSPENSION IN A CHAMBER WITH EXTENSION

2020 ◽  
Author(s):  
A. Yu. Krainov ◽  
◽  
K. M. Moiseeva ◽  
V. A. Poryazov ◽  
◽  
...  
Keyword(s):  
Dynamic Model ◽  
Aluminum Powder ◽  
Swirling Flow ◽  
Numerical Study ◽  
Mathematical Formulation ◽  
Expansion Chamber ◽  
Flow Swirling ◽  
Air Suspension

A numerical study of combustion of the aluminum-air suspension in the swirling flow in the expansion chamber has been performed. The physical and mathematical formulation of the problem is based on the dynamic model of the multiphase reacting media.

scholarly journals The Impact of Ambient Atmospheric Mineral-Dust Particles on the Calcification of Lungs

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 125
Author(s):  
Mariola Jabłońska ◽  
Janusz Janeczek ◽  
Beata Smieja-Król
Keyword(s):  
Mineral Dust ◽  
Smoking Habit ◽  
Lower Lobe ◽  
Ambient Air ◽  
Dust Particles ◽  
Masking Effect ◽  
Amorphous Calcium Carbonate ◽  
Calcium Salts ◽  
The Impact ◽  
First Time

For the first time, it is shown that inhaled ambient air-dust particles settled in the human lower respiratory tract induce lung calcification. Chemical and mineral compositions of pulmonary calcium precipitates in the lung right lower-lobe (RLL) tissues of 12 individuals who lived in the Upper Silesia conurbation in Poland and who had died from causes not related to a lung disorder were determined by transmission and scanning electron microscopy. Whereas calcium salts in lungs are usually reported as phosphates, calcium salts precipitated in the studied RLL tissue were almost exclusively carbonates, specifically Mg-calcite and calcite. These constituted 37% of the 1652 mineral particles examined. Mg-calcite predominated in the submicrometer size range, with a MgCO3 content up to 50 mol %. Magnesium plays a significant role in lung mineralization, a fact so far overlooked. The calcium phosphate (hydroxyapatite) content in the studied RLL tissue was negligible. The predominance of carbonates is explained by the increased CO2 fugacity in the RLL. Carbonates enveloped inhaled mineral-dust particles, including uranium-bearing oxides, quartz, aluminosilicates, and metal sulfides. Three possible pathways for the carbonates precipitation on the dust particles are postulated: (1) precipitation of amorphous calcium carbonate (ACC), followed by its transformation to calcite; (2) precipitation of Mg-ACC, followed by its transformation to Mg-calcite; (3) precipitation of Mg-free ACC, causing a localized relative enrichment in Mg ions and subsequent heterogeneous nucleation and crystal growth of Mg-calcite. The actual number of inhaled dust particles may be significantly greater than was observed because of the masking effect of the carbonate coatings. There is no simple correlation between smoking habit and lung calcification.

scholarly journals Evaluation of Marblewood Dust’s (Marmaroxylon racemosum) Effect on Ignition Risk

2021 ◽  
Vol 11 (15) ◽  
pp. 6874
Author(s):  
Miroslava Vandličkova ◽  
Iveta Markova ◽  
Katarina Holla ◽  
Stanislava Gašpercová
Keyword(s):  
Particle Size ◽  
Dust Particles ◽  
Wood Dust ◽  
Sieve Analysis ◽  
Granulometric Analysis ◽  
Analysis Measurement ◽  
Risk Research ◽  
Minimum Ignition Temperature ◽  
The Impact

The paper deals with the selected characteristics, such as moisture, average bulk density, and fraction size, of tropical marblewood dust (Marmaroxylon racemosum) that influence its ignition risk. Research was focused on sieve analysis, granulometric analysis, measurement of moisture level in the dust, and determination of the minimum ignition temperatures of airborne tropical dust and dust layers. Samples were prepared using a Makita 9556CR 1400W grinder and K36 sandpaper for the purpose of selecting the percentages of the various fractions (<63, 63, 71, 100, 200, 315, 500 μm). The samples were sized on an automatic vibratory sieve machine Retsch AS 200. More than 65% of the particles were determined to be under 100 μm. The focus was on microfractions of tropical wood dust (particles with a diameter of ≤100 µm) and on the impact assessment of particle size (particle size <100 µm) on the minimum ignition temperatures of airborne tropical dust and dust layers. The minimum ignition temperature of airborne marblewood dust decreased with the particle size to the level of 400 °C (particle size 63 μm).

scholarly journals Determination of Zero Dimensional, Apparent Devolatilization Kinetics for Biomass Particles at Suspension Firing Conditions

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1018
Author(s):  
Anna Espekvist ◽  
Tian Li ◽  
Peter Glarborg ◽  
Terese Løvås ◽  
Peter Arendt Jensen
Keyword(s):  
Aspect Ratio ◽  
Particle Density ◽  
Fluid Dynamic ◽  
Particle Radius ◽  
Biomass Combustion ◽  
Least Squares Regression ◽  
Gas Temperature ◽  
Density Maximum ◽  
Parameter Ranges ◽  
The Impact

As part of the strive for a carbon neutral energy production, biomass combustion has been widely implemented in retrofitted coal burners. Modeling aids substantially in prediction of biomass flame behavior and thus in boiler chamber conditions. In this work, a simple model for devolatilization of biomass at conditions relevant for suspension firing is presented. It employs Arrhenius parameters in a single first order (SFOR) devolatilization reaction, where the effects of kinetics and heat transfer limitations are lumped together. In this way, a biomass particle can be modeled as a zero dimensional, isothermal particle, facilitating computational fluid dynamic calculations of boiler chambers. The zero dimensional model includes the effects of particle aspect ratio, particle density, maximum gas temperature, and particle radius. It is developed using the multivariate data analysis method, partial least squares regression, and is validated against a more rigorous semi-2D devolatilization model. The model has the capability to predict devolatilization time for conditions in the parameter ranges; radius (39–1569 μμm), density (700–1300 kg/m3), gas temperature (1300–1900 K), aspect ratio (1.01–8). Results show that the particle radius and gas phase temperature have a large influence on the devolatilization rate, and the aspect ratio has a comparatively smaller effect, which, however, cannot be neglected. The impact of aspect ratio levels off as it increases. The model is suitable for use as stand alone or as a submodel for biomass particle devolatilization in CFD models.

Sign in / Sign up

Export Citation Format

Share Document