scholarly journals Optimisation of the 2.2 liter high speed diesel engine for proposed Bharat stage 5 emission norms in India

2014 ◽  
Vol 18 (1) ◽  
pp. 169-178 ◽  
Author(s):  
Pundlik Ghodk ◽  
Jiwak Suryawanshi
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Direct Injection ◽  
Engine Performance ◽  
Piston Crown ◽  
High Speed Diesel ◽  
Crown Shape ◽  
Performance And Emissions ◽  
Egr Cooler ◽  
Engine Emission

Direct injection diesel engine combustion system offers improvements in performance and fuel economy benefits. 4 valves per cylinder, turbocharged and intercooled diesel engine became trustworthy for automobile application. Electronic diesel control, use of common rail with increase in injection pressures, and flexibility in injection control has changed the image of diesel engine. Evolutions in piston crown shape, intake ports with different swirl level helped to enhance mixing of air and fuel for better performance and emissions. In this describe the work done on 4 cylinder diesel engine, upgraded to BS5 (Bharat stage 5) emission norms with 20% power increase. A systematic approach of engine development was fallowed. Engine performance prediction was done using AVL Boost software. Boost Model was validated with existing engine cylinder pressure. Combustion parameters have been varied to predict higher power. Vehicle model has been build using AVL cruise software and used to obtain steady state load- speed points. Engine emission development has been done on engine test bench. Typical hardware like piston crown, turbocharger, EGR system with EGR cooler and various combustion parameters were tested and optimized. Suitable after-treatment system was selected optimized for precious metal loading reach Bharat stage 5 emissions.

scholarly journals Influence of Ultra Injection Pressure with Dynamic Injection Timing on CRDI Engine Performance Using Simarouba Biodiesel Blends

2018 ◽  
Vol 15 (4) ◽  
pp. 5748-5759
Author(s):  
Srinath Pai ◽  
Abdul Sharief ◽  
Shiva Kumar
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Direct Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Injection Timing ◽  
Brake Thermal Efficiency ◽  
High Speed Diesel ◽  
Performance And Emissions ◽  
Smoke Opacity

A single cylinder diesel engine upgraded to operate Common Rail Direct Injection (CRDI) system and employed in this investigation. Tests were conducted on this engine using High-Speed diesel (HSD) and Simarouba biodiesel (SOME) blends to determine the influence of Injection Pressure (IP) and Injection Timing (IT) on the performance and emissions. Four unique IP of 400 bar to 1000 bar, in steps of 200 bar and four differing ITs of 10°, 13°, 15° and 18° before Top Dead Center (bTDC) combinations were attempted for the 25% to full load. Compression Ratio (CR) of 16.5 and Engine speed of 1500 RPM was kept constant during all trails. Critical performance parameter like Brake Thermal Efficiency (BTE) and Brake Specific Fuel Consumption (BSFC) were analyzed, primary emission parameters of the diesel engine The NOx and Smoke opacity were recorded. Finally, the outcomes of each combination were discussed.

Characteristics of performance and emissions in high-speed direct injection diesel engine fueled with diethyl ether/diesel fuel blends

Energy ◽  
2012 ◽  
Vol 43 (1) ◽  
pp. 214-224 ◽  
Author(s):  
Dimitrios C. Rakopoulos ◽  
Constantine D. Rakopoulos ◽  
Evangelos G. Giakoumis ◽  
Athanasios M. Dimaratos
Keyword(s):  
Diesel Engine ◽  
Diethyl Ether ◽  
Diesel Fuel ◽  
High Speed ◽  
Direct Injection ◽  
Direct Injection Diesel Engine ◽  
Fuel Blends ◽  
Performance And Emissions

Detecting and Correcting Cylinder Imbalance in Direct Injection Engines

2000 ◽  
Vol 123 (3) ◽  
pp. 413-424 ◽  
Author(s):  
M. J. van Nieuwstadt ◽  
I. V. Kolmanovsky
Keyword(s):  
High Pressure ◽  
Diesel Engine ◽  
High Speed ◽  
Fuel Injection ◽  
Direct Injection ◽  
Direct Injection Engines ◽  
High Speed Diesel ◽  
On Line ◽  
Manufacturing Accuracy ◽  
Adaptation Scheme

Modern direct injection engines feature high pressure fuel injection systems that are required to control the fuel quantity very accurately. Due to limited manufacturing accuracy these systems can benefit from an on-line adaptation scheme that compensates for injector variability. Since cylinder imbalance affects many measurable signals, different sensors and algorithms can be used to equalize torque production by the cylinders. This paper compares several adaptation schemes that use different sensors. The algorithms are evaluated on a cylinder-by-cylinder simulation model of a direct injection high speed diesel engine. A proof of stability and experimental results are reported as well.

Investigating the Effect of Utilizing New Induction Manifold Designs on the Combustion Characteristics and Emissions of a Direct Injection Diesel Engine

2018 ◽  
Vol 140 (12) ◽  
Author(s):  
Mohamed A. Bassiony ◽  
Abdellatif M. Sadiq ◽  
Mohammed T. Gergawy ◽  
Samer F. Ahmed ◽  
Saud A. Ghani
Keyword(s):  
Diesel Engine ◽  
Peak Pressure ◽  
Direct Injection ◽  
Three Dimensional ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Maximum Pressure ◽  
Performance And Emissions ◽  
Di Diesel Engine ◽  
Dynamics Simulations

New induction manifold designs have been developed in this work to enhance the turbulence intensity and improve the mixing quality inside diesel engine cylinders. These new designs employ a spiral-helical shape with three different helical diameters (1D, 2D, 3D; where D is the inner diameter of the manifold) and three port outlet angles: 0 deg, 30 deg, and 60 deg. The new manifolds have been manufactured using three-dimensional printing technique. Computational fluid dynamics simulations have been conducted to estimate the turbulent kinetic energy (TKE) and the induction swirl generated by these new designs. The combustion characteristics that include the maximum pressure raise rate (dP/dθ) and the peak pressure inside the cylinder have been measured for a direct injection (DI) diesel engine utilizing these new manifold designs. In addition, engine performance and emissions have also been evaluated and compared with those of the normal manifold of the engine. It was found that the new manifolds with 1D helical diameter produce a high TKE and a reasonably strong induction swirl, while the ones with 2D and 3D generate lower TKEs and higher induction swirls than those of 1D. Therefore, dP/dθ and peak pressure were the highest with manifolds 1D, in particular manifold m (D, 30). Moreover, this manifold has provided the lowest fuel consumption with the engine load by about 28% reduction in comparison with the normal manifold. For engine emissions, m (D, 30) manifold has generated the lowest CO, SO2, and smoke emissions compared with the normal and other new manifolds as well, while the NO emission was the highest with this manifold.

Effects of the Re-Entrant Bowl Geometry on a DI Turbocharged Diesel Engine Performance and Emissions—A CFD Approach

2010 ◽  
Vol 132 (12) ◽  
Author(s):  
S. Pasupathy Venkateswaran ◽  
G. Nagarajan
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Maximum Diameter ◽  
Diffusion Combustion ◽  
Turbocharged Diesel Engine ◽  
Performance And Emissions ◽  
Di Diesel Engine ◽  
Fuel Mixing

The purpose of this study is to investigate the influence of re-entrant bowl geometry on both engine performance and combustion efficiency in a direct injection (DI), turbocharged diesel engine for heavy-duty applications. The piston bowl design is one of the most important factors that affect the air–fuel mixing and the subsequent combustion and pollutant formation processes in a DI diesel engine. The bowl geometry and dimensions, such as the pip region, bowl lip area, and toroidal radius, are all known to have an effect on the in-cylinder mixing and combustion processes. Based on the idea of enhancing diffusion combustion at the later stage of the combustion period, three different bowl geometries, namely, bowl 1 (baseline), bowl 2, and bowl 3 were selected and investigated. All the other relevant parameters, namely, compression ratio, maximum diameter of the bowl, squish clearance and injection rate were kept constant. A commercial CFD code STAR-CD was used to model the in-cylinder flows and combustion process, and experimental results of the baseline bowl were used to validate the numerical model. The simulation results show that, bowl 3 enhance the turbulence and hence results in better air-fuel mixing among all three bowls in a DI diesel engine. As a result, the indicated specific fuel consumption and soot emission reduced although the NOx emission is increased owing to better mixing and a faster combustion process. Globally, since the reduction in soot is larger (−46% as regards baseline) than the increase in NOx (+15% as regards baseline), it can be concluded that bowl 3 is the best trade-off between performance and emissions.

Research on the Compression-Ignition Engine and its Fuels

1950 ◽  
Vol 162 (1) ◽  
pp. 13-19 ◽  
Author(s):  
P. E. B. Vaile
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Engine Performance ◽  
Lubricating Oil ◽  
Future Research ◽  
Compression Ignition Engine ◽  
Short Account ◽  
Beneficial Effects ◽  
High Speed Diesel ◽  
Fuel Characteristics

This paper, an abstract of the original, is intended to provide information concerning the present status of Diesel fuel research. The paper is divided into two parts, the first of which concerns the types of fuel in use, describing briefly their sources and properties. A short account is also given of the existing fuel situation and how this may influence future research. Part II deals with the effects of fuel characteristics on engine performance, wear, and fouling. The methods of overcoming any deleterious effects caused by the fuel are discussed, and particular reference is made to the beneficial effects of lubricating oil additives. It must be emphasized that most of the work described refers to the high-speed Diesel engine, owing to the unsuitability of large units for laboratory testing. However, this is beneficial since the high-speed Diesel is most sensitive to fuel characteristics, and it serves to disclose the majority of defects that can arise in a Diesel engine.

scholarly journals Performance and Exhaust Gas Emission of Biodiesel Fuel with Palm Oil Based Additive in Direct Injection Compression Ignition Engine

2019 ◽  
Vol 16 (1) ◽  
pp. 6173-6187
Author(s):  
C. B. How ◽  
N. M. Taib ◽  
M. R. A. Mansor
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Palm Oil ◽  
Direct Injection ◽  
Engine Performance ◽  
Compression Ignition ◽  
Exhaust Gas Emission ◽  
And Performance ◽  
Engine Emission ◽  
Emission And Performance

Blending biodiesel in the diesel would increase the tendency of having a high viscosity fuel. For this reason, the addition of a small amount of additives into the blends may improve the engine performance and lead to better fuel consumption. The purpose of this paper is to experimentally investigate the performance and emissions generated by various mixtures of biodiesel and diesel with palm oil based additive in the compression ignition direct injection diesel engine of Yanmar TF90. Experiments were also conducted to identify the ideal biodiesel, diesel and the additive mixture that produces the optimum engine emission and performance. The experiment was conducted by using mixtures that consisted of 10%, 20% and 30% of biodiesel with and without the additives. From the results of the experiments, PB10 with 0.8 ml additives produced the highest braking power and lowest fuel consumption as compared to the diesel and the rest of the biodiesel blends. The presence of biodiesel and additives were found to not only improve the engine performance, but also led to the reduction of carbon emission. Although all the diesel, biodiesel and additive demonstrated low smoke emission with a complete combustion, a slight increase however, was observed in the NOx emission. In conclusion, PB10 is seen as the most ideal blend for diesel engine in terms of providing the most optimum engine emission and performance.

Sign in / Sign up

Export Citation Format

Share Document