scholarly journals Numerical study on heat transfer and flow resistance characteristics of multi-head twisted spiral tube

2021 ◽  
pp. 206-206
Author(s):  
Zhiqun Zheng ◽  
Fayi Yan ◽  
Lei Shi
Keyword(s):  
Heat Transfer ◽  
Numerical Calculation ◽  
Cross Section ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Smooth Tube ◽  
Transfer Performance ◽  
Spiral Tube ◽  
Inside Diameter ◽  
The Cross

A numerical calculation model of multihead twisted spiral tube (MTST) was established. In the range of Reynolds number from 5000 to 35000, the influence of different twisted structure on the flow and heat transfer characteristics of the MTST was studied by numerical calculation. Numerical calculation results indicate that the Nusselt number and friction coefficient increase with the increase in the ratio of outside and inside diameter of the cross-section, the increase in the number of twisted nodes, and the increase in the number of twisted spiral tube heads. Under the condition of the same spiral structure and the same hydraulic diameter, the heat transfer performance of the MTST is better than that of the spiral smooth tube. In addition, through artificial neural network (ANN) analysis, the ratio of outside and inside diameter of the cross-section, number of twisted nodes, and the number of twisted spiral tube heads were optimized to promote the comprehensive heat transfer performance. The performance evaluation criterion is the highest when the ratio of outside and inside diameter of the cross-section is 25/22.5, the number of twisted nodes is 3, and the number of twisted spiral tube heads is 3, which is 1.849 of the spiral smooth tube.

scholarly journals Numerical study of flow patterns and heat transfer in mini twisted oval tubes

2015 ◽  
Vol 26 (12) ◽  
pp. 1550140 ◽  
Author(s):  
Amin Ebrahimi ◽  
Ehsan Roohi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Critical Role ◽  
Reynolds Numbers ◽  
Flow Patterns ◽  
Working Fluid ◽  
Transfer Performance ◽  
Temperature Dependent ◽  
Overall Performance

Flow patterns and heat transfer inside mini twisted oval tubes (TOTs) heated by constant-temperature walls are numerically investigated. Different configurations of tubes are simulated using water as the working fluid with temperature-dependent thermo-physical properties at Reynolds numbers ranging between 500 and 1100. After validating the numerical method with the published correlations and available experimental results, the performance of TOTs is compared to a smooth circular tube. The overall performance of TOTs is evaluated by investigating the thermal-hydraulic performance and the results are analyzed in terms of the field synergy principle and entropy generation. Enhanced heat transfer performance for TOTs is observed at the expense of a higher pressure drop. Additionally, the secondary flow generated by the tube-wall twist is concluded to play a critical role in the augmentation of convective heat transfer, and consequently, better heat transfer performance. It is also observed that the improvement of synergy between velocity and temperature gradient and lower irreversibility cause heat transfer enhancement for TOTs.

scholarly journals Heat transfer performance of R1234yf for convective boiling in horizontal micro-fin and smooth tubes

2020 ◽  
Vol 207 ◽  
pp. 01009
Author(s):  
Thanh Nhan Phan ◽  
Van Hung Tran ◽  
Nikola Kaloyanov ◽  
Momchil Vassilev
Keyword(s):  
Heat Transfer ◽  
Flow Pattern ◽  
Mass Flux ◽  
Heat Transfer Performance ◽  
Smooth Tube ◽  
Outer Diameter ◽  
Transfer Performance ◽  
Convective Boiling ◽  
Penalty Factor ◽  
Smooth Tubes

This study analyses the performance of heat transfer process which occurs in the convective boiling of Hydro fluoro Olefin (HFO) refrigerant, R1234yf, in horizontal tube. Heat transfer and pressure drop of R1234yf are analyzed and computed at the same working conditions on the same size of outer diameter of tube do = 9.52 mm with difference of inner surface, one is a smooth surface and microfin for other. The flow pattern maps were built at 5°C saturation temperature with 8.62 kW/m2 of heat flux, it is presented that flow pattern of helix flow occurs at very low mass flux and low quality, while at that condition on smooth tube the flow is still stratified wavy flow. The comparison of heat transfer performance between microfin and smooth tube would be evaluated on enhancement factor E, penalty factor P and efficiency index I. With the mass flux on the range G = 111 -- 333 kg/m2s for 5°C boiling temperature, the results show that, average value of E is 2.18; 1.45 of P and 1.54 of I. One more impressing thing is that, at the quality “x” larger than 0.8, the dryout phenomenon takes place on smooth tubes while microfin tubes do not have this phenomenon.

scholarly journals Numerical Study on Heat Transfer Performance in Packed Bed

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 414 ◽  
Author(s):  
Shicheng Wang ◽  
Chenyi Xu ◽  
Wei Liu ◽  
Zhichun Liu
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Transfer Process ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Continuous Phase ◽  
Heat Transfer Process ◽  
Packed Beds ◽  
Transfer Performance ◽  
Entransy Dissipation

Packed beds are widely used in industries and it is of great significance to enhance the heat transfer between gas and solid states inside the bed. In this paper, numerical simulation method is adopted to investigate the heat transfer principle in the bed at particle scale, and to develop the direct enhanced heat transfer methods in packed beds. The gas is treated as continuous phase and solved by Computational Fluid Dynamics (CFD), while the particles are treated as discrete phase and solved by the Discrete Element Method (DEM); taking entransy dissipation to evaluate the heat transfer process. Considering the overall performance and entransy dissipation, the results show that, compared with the uniform particle size distribution, radial distribution of multiparticle size can effectively improve the heat transfer performance because it optimizes the velocity and temperature field, reduces the equivalent thermal resistance of convection heat transfer process, and the temperature of outlet gas increases significantly, which indicates the heat quality of the gas has been greatly improved. The increase in distribution thickness obviously enhances heat transfer performance without reducing the equivalent thermal resistance in the bed. The result is of great importance for guiding practical engineering applications.

Sign in / Sign up

Export Citation Format

Share Document