The Industrial Sector and the Debt Crisis in Latin America

1985 ◽  
Vol 27 (4) ◽  
pp. 95-110 ◽  
Author(s):  
Hugh Schwartz

The international debt crisis has received a great deal of attention at the macroeconomic and the political levels, but there have been few analyses of its impact upon individual sectors. Thus this article will consider the consequences of the Latin American debt crisis for manufacturing industry, particularly the adjustments that this sector has made in its response to the crisis.The adjustment process which the manufacturing sector has undergone has produced implications which depend partly upon factors exogenous to the sector and partly upon the nature, and degree of competitiveness, of the manufacturing activity in each of the countries. In turn, the latter factors have been influenced by those very macroeconomic and exogenous variables. Some variables, such as the exchange rate, play major roles in determining the competitiveness of industry, as has frequently been emphasized in recent years. This is true of a number of variables at the industry and enterprise level as well.

1986 ◽  
Vol 25 (1) ◽  
pp. 93-95
Author(s):  
Najam-us- Saqib

Jamaica, known in the world for her rich deposits of bauxite ore, is a small Caribbean country with an area of 10991 square kilometers and a population of just over two million individuals. This beautifu11and, which was described by Columbus as "The fairest isle that eyes have beheld" has developed a remarkably diversified manufacturing sector starting from a modest industrial base. Jamaica's manufacturing industry enjoyed a respectable growth rate of about 6 percent per annum during the good old days of the euphoric '50s and '60s. However, those bright sunny days ''when to live was bliss" were followed by the chilling winter of much subdued progress. The rise and fall of growth have aroused considerable interest among economists and policy• makers. The book under review probes the causes of this behaviour by analysing key characteristics of Jamaican manufacturing sector and tracing its path of evolution.


1990 ◽  
Vol 4 (1) ◽  
pp. 31-42 ◽  
Author(s):  
Jeremy Bulow ◽  
Kenneth Rogoff

Should taxpayers of wealthy countries finance a leveraged buyout of third world debt? The case for establishing an international debt discount facility rests on the belief that the overhang of foreign commercial bank debt is stifling growth in the Highly Indebted Countries, and that coordination problems among private sector banks are blocking efficiency-enhancing debt reduction schemes. Thus there is scope for a multilateral government agency to step in, buy up the debts, and pass on the efficiency gains to struggling debtors. Our contention is that a debt discount facility would in fact be a black hole for aid funds, and would yield only minimal efficiency benefits. Our assessment of the debt crisis suggests a very different approach. Development aid should be divorced from debt negotiations and instead should be tied to countries' performance in areas such as environmental policy, drug interdiction, and population control. Future aid allocations should not be disguised as loan guarantees, and the massive bond obligations of existing multilateral lenders ought to be placed on the books. Finally, we recommend reversing a number of legal and regulatory changes made in the 1970s that served to encourage the loans in the first place.


Author(s):  
José Antonio Ocampo ◽  
Gabriel Porcile

This chapter analyses the evolution of industrial policy in the four largest Latin American economies—Brazil, Mexico, Argentina, and Colombia—using Korea as a benchmark. Three phases in industrial policy and industrial transformation are identified: a period of state-led industrialization between the end of the Second World War and around 1980, which came to an end with the debt crisis of the 1980s; the 1990s, when the region abandoned industrial policy and embraced the structural reform agenda; and the commodity boom after 2004, when the region witnessed a timid return of industrial policy, while at the same time world demand favoured the reprimarization of its export structure. The outcomes of these policies in terms of building technological capabilities and diversifying the industrial sector towards knowledge-intensive activities, are analysed using different indicators. The importance of the interactions between structural change, industrial policy, and macroeconomic policies (especially exchange rate and capital account management) are highlighted.


2007 ◽  
Vol 21 (1) ◽  
pp. 135-160
Author(s):  
Thomas J. Trebat

The Argentine debt crisis of 2001–2002 and its aftermath are examined in the light of the moral framework of Catholic social teaching on the debt problems of poor countries. The author, a former practitioner in emerging-markets finance, seeks to bring together and interpret the church's teaching (which was mostly worked out in the 1980s) in the particular economic and social circumstances of Argentina in the early 2000s. The key question is how closely the outcome of the debt crisis in Argentina conformed to what social justice, in the Church's interpretation, would have required. The main conclusion is that the resolution of the crisis was broadly consistent with that teaching. The crisis was managed with pragmatism rooted in shared (by debtor and creditors) concerns for social justice—more so than had been possible in the earlier Latin American debt crises in the 1980s, which the author had also witnessed. For that, many factors are responsible, including the emergence of civil society in Argentina and changes in the system of emerging markets finance. The author argues, however, that the moral framework of the Catholic Church on matters of international debt may deserve some of the credit.


2017 ◽  
Vol 29 (69) ◽  
Author(s):  
Lourdes Alicia Gonzalez Torres ◽  
Manuel Alejandro Ibarra Cisneros ◽  
Karla Emilia Cervantes Collado

Resumen: en este artículo se analizó el comportamiento de la adopción de las tecnologías de la información y comunicación en los subsectores manufactureros de Baja California, para determinar sus efectos en los resultados económicos y los cambios que generan en las empresas. Para ello se utilizaron seis dimensiones del modelo desarrollado por Karmarkar y Mangal (2004), y con la tau-b de Kendall se calculó la correlación entre el grado de adopción de dichas tecnologías y los resultados económicos. Aunque éstos no se compararon con los de otros estudios, puesto que aquí sólo se seleccionó cierto tipo de empresas, se logró exponer la situación del sector manufacturero estatal, en relación con el uso de las tecnologías. Por lo que se puede concluir que la adopción de éstas influye positivamente en los resultados de las empresas.Palabras clave: correlación; industrias manufactureras; industria-innovaciones tecnológicas; sector industrial; pequeña y mediana empresa; investigación cualitativa.  The impact of information and communication technologies on the manufacturing industry of Baja CaliforniaAbstract: this paper analyzes the performance of the adoption of information and communication technologies in manufacturing sub-sectors of Baja California in order to determine their effects on the economic results and the changes generated in the companies. For this purpose, six dimensions of the model developed by Karmarkar and Mangal (2004) were utilized, and using the Kendall’s tau-b the correlation between the level of adoption of such technologies and the economic results was calculated. Although these were not compared to those of other studies, since only certain types of companies were selected, the situation of state manufacturing sector was set out in relation to the use of these technologies. Therefore, it can be concluded that the adoption of such technologies has a positive influence on the performance of companies. Key words: correlation; manufacturing industries; industry-technological innovations; industrial sector; small and medium-sized enterprises; qualitative research.


JEJAK ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 200-217
Author(s):  
Bayu Hariyanto

Indonesia is involved in the global effort to alleviate the deterioration of the environment due to climate change. Given that the manufacturing industry accounts for the second-highest share of national energy consumption, efficiency energy in the industrial sector is crucial. This research examines which industrial subsector has to be prioritized to improve energy efficiency and what are the determinant factors that influence energy efficiency in Indonesia manufacturing. This study analyzes energy intensity as an approach to measure energy efficiency. Focusing on the 2010 - 2015 period, this research employs two methods, namely input-output and panel data regression analysis. The empirical finding shows that textiles and textile products; pulp, paper, paper products, printing, and publishing; and rubber and plastics sectors are the first priority subsectors that must implement green industry standards. The next priority is the subsectors at the second level but have no green industrial standards, namely electrical and optical equipment. Furthermore, there were four variables that statistically increase energy intensity, namely lagged energy intensity, technology intensity, lagged value added, and location of plant. However, other two variables, the price of electricity and company size, can reduce energy intensity.


2021 ◽  
Vol 10 (3) ◽  
pp. 1154-1163
Author(s):  
Dana Marsetiya Utama ◽  
Dian Setiya Widodo

The energy crisis has become an environmental problem, and this has received much attention from researchers. The manufacturing sector is the most significant contributor to energy consumption in the world. One of the significant efforts made in the manufacturing industry to reduce energy consumption is through proper scheduling. Energy-efficient scheduling (EES) is a problem in scheduling to reduce energy consumption. One of the EES problems is in a flow shop scheduling problem (FSSP). This article intends to develop a new approach to solving an EES in the FSSP problem. Hybrid Harris hawks optimization (hybrid HHO) algorithm is offered to resolve the EES issue on FSSP by considering the sequence-dependent setup. Swap and flip procedures are suggested to improve HHO performance. Furthermore, several procedures were used as a comparison to assess hybrid HHO performance. Ten tests were exercised to exhibit the hybrid HHO accomplishment. Based on numerical experimental results, hybrid HHO can solve EES problems. Furthermore, HHO was proven more competitive than other algorithms.


2018 ◽  
Vol 7 (2.29) ◽  
pp. 170 ◽  
Author(s):  
Shiau Wei Chan ◽  
M F. Ahmad ◽  
Izzuddin Zaman ◽  
Woan Shin Ko

Employability skills are among the important soft skills that should be acquired by employees in the industrial sector today. Unfortunately, Malaysian graduates do face obstacles when looking for employment upon graduation due to the absence of employability skills among them. The main aim of this study is to identify employers’ perceptions of the most important employability skills in the manufacturing industry. The study is also aimed to determine the differences between the important employability skills from the perspective of employers based on their gender, their company’s size, and types of companies in the manufacturing industry. In this study, a total of 182 employers from the manufacturing industry in Batu Pahat were chosen randomly. Questionnaires were administered to the employers. The data generated were statistically analysed using descriptive and inferential analyses. The analysis shows that employers’ perception of the most important employability skills in manufacturing industry is communication skills. The independent variables chosen are gender, company size, and types of manufacturing sector, while the dependent variable is the perceptions of important employability skills in the manufacturing industry. Results show that the perceptions of important employability skills in the manufacturing industry have no significant difference according to employers’ gender and type of manufacturing sector, but there is a significant difference for company size. This quantitative study provides key insights that enable future employees to have more understanding of the employment demand in the manufacturing industry nowadays and for employees to develop their employability skills before getting ready to enter the labour market.  


2021 ◽  
Vol 13 (4) ◽  
pp. 1600
Author(s):  
Weijiang Liu ◽  
Mingze Du ◽  
Yuxin Bai

As the world’s largest developing country, and as the home to many of the world’s factories, China plays a crucial role in the sustainable development of the world economy regarding environmental protection, energy conservation, and emission reduction issues. Based on the data from 2003–2015, this paper examined the green total factor productivity and the technological progress in the Chinese manufacturing industry. A slack-based measure (SBM) Malmquist productivity index was used to measure the bias of technological change (BTC), input-biased technological change (IBTC), and output-biased technological change (OBTC) by decomposing the technological progress. It also investigated the mechanism of environmental regulation, property right structure, enterprise-scale, energy consumption structure, and other factors on China’s technological progress bias. The empirical results showed the following: (1) there was a bias of technological progress in the Chinese manufacturing industry during the research period; (2) although China’s manufacturing industry’s output tended to become greener, it was still characterized by a preference for overall CO2 output; and (3) the impact of environmental regulations on the Chinese manufacturing industry’s technological progress had a significant threshold effect. The flexible control of environmental regulatory strength will benefit the Chinese manufacturing industry’s technological development. (4) R&D investment, export delivery value, and structure of energy consumption significantly contributed to promoting technological progress. This study provides further insight into the sustainable development of China’s manufacturing sector to promote green-biased technological progress and to achieve the dual goal of environmental protection and healthy economic growth.


1989 ◽  
Vol 21 (1-2) ◽  
pp. 221-239 ◽  
Author(s):  
Eva Paus

Since 1982, most Latin American countries have witnessed slow economic growth and a persistent net transfer of funds to the rest of the world as a result of sharply reduced inflows of private international bank lending and large debt payment obligations. Against this background direct foreign investment (DFI) has received increasing attention as one important element in overcoming the present stagnation-cum-debt crisis as well as in contributing to renewed economic growth. This article explores the possible contributions of DFI to the future economic growth and development of the region.1


Sign in / Sign up

Export Citation Format

Share Document