scholarly journals Effects of remineralization procedures on shear bond strengths of brackets bonded to demineralized enamel surfaces with self-etch systems

2015 ◽  
Vol 86 (4) ◽  
pp. 661-667 ◽  
Author(s):  
Zeliha Müge Baka ◽  
Mehmet Akin ◽  
Zehra Ileri ◽  
Faruk Ayhan Basciftci
Keyword(s):  
Surface Roughness ◽  
Adhesive System ◽  
Orthodontic Brackets ◽  
Control Group ◽  
Scanning Electron Microscopy Data ◽  
Group I ◽  
Demineralized Enamel ◽  
Previously Treated ◽  
Bond Strengths ◽  
Microscopy Data

ABSTRACT Objective:  To compare the effects of different remineralization procedures on the surface roughness of teeth, shear bond strengths (SBSs), and Adhesive Remnant Index scores of self-etching primer (SEP) used to bond orthodontic brackets to previously treated demineralized enamel surfaces. Materials and Methods:  A total of 140 extracted human premolar teeth were randomly divided into seven equal groups. Group I was the control group. A demineralization procedure was performed in the other six groups. A remineralization procedure was performed before bonding by using casein phosphopeptide-amorphous calcium phosphate, fluoride, a microabrasion mixture (18% hydrochloric acid-fine pumice), a microabrasion agent, and resin infiltration in groups III to VII. Brackets were bonded using a self-etching primer/adhesive system. The specimens were tested for SBS. The roughness and morphology of the enamel surfaces were analyzed using profilometer and scanning electron microscopy. Data were analyzed with analysis of variance, Tukey, and G-tests at the α  =  .05 level. Results:  Significant differences were found in the SBS values among the seven groups (F  =  32.69, P  =  .003). The lowest SBS value was found in group II (2.62 ± 1.46 MPa). No significant differences were found between groups I, III, and VII, between groups III and IV, or between groups V and VI. The differences in the roughness values were statistically significant among the groups (P  =  .002). Conclusions:  Remineralization procedures restore the decreased SBS of orthodontic brackets and decrease surface roughness caused by enamel demineralization. SEPs provide clinically acceptable SBS values for bonding orthodontic brackets to previously treated demineralized enamel surfaces.

scholarly journals Shear bond strength of orthodontic brackets to enamel after application of a caries infiltrant

2014 ◽  
Vol 85 (4) ◽  
pp. 645-650 ◽  
Author(s):  
Laura Mews ◽  
Matthias Kern ◽  
Robert Ciesielski ◽  
Helge Fischer-Brandies ◽  
Bernd Koos
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Force ◽  
Shear Bond Strength ◽  
Orthodontic Brackets ◽  
Enamel Defects ◽  
Adhesive Remnant Index ◽  
Demineralized Enamel ◽  
Kolmogorov Smirnov ◽  
Bond Strengths

ABSTRACT Objective:  To examine differences in the shear bond strength of orthodontic brackets on differently mineralized enamel surfaces after applying a caries infiltrant or conventional adhesive. Materials and Methods:  A total of 320 bovine incisors were assigned to eight pretreated groups, and the shear force required for debonding was recorded. Residual adhesive was evaluated by light microscopy using the adhesive remnant index. Statistical analysis included Kolmogorov-Smirnov, analysis of variance (ANOVA), and Scheffé tests. Results:  The highest bond strength (18.8 ± 4.4 MPa) was obtained after use of the caries infiltrant. More residual adhesive and fewer enamel defects were observed on infiltrated enamel surfaces. Brackets on demineralized enamel produced multiple enamel defects. Conclusions:  Acceptable bond strengths were obtained with all material combinations. A caries-infiltrant applied before bracket fixation has a protective effect, especially on demineralized enamel.

scholarly journals The Impact of Chlorhexidine Mouth Rinse on the Bond Strength of Polycarbonate Orthodontic Brackets

2014 ◽  
Vol 15 (6) ◽  
pp. 688-692 ◽  
Author(s):  
Sukumaran Anil ◽  
Farouk Ahmed Hussein ◽  
Mohammed Ibrahim Hashem ◽  
Elna P Chalisserry
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Test Group ◽  
Orthodontic Brackets ◽  
Control Group ◽  
Mouth Rinse ◽  
Significant Difference ◽  
Bond Strengths ◽  
The Impact

ABSTRACT Objective The purpose of the current in-vivo study was to assess the effect of using 0.12% chlorhexidine (CHX) mouth rinse, before bonding, on shear bond strength of polycarbonate brackets bonded with composite adhesive. Subjects and methods Eighteen orthodontic patients with a mean age 21.41 ± 1.2 years, who were scheduled to have 2 or more first premolars extracted, were included in this study. Patients were referred for an oral prophylaxis program which included, in part, the use of a mouth rinse. Patients were divided into 2 groups, a test group of 9 patients who used 0.12% CHX gluconate mouth rinse twice daily and a control group of 9 patients who used a mouth rinse without CHX, but with same color. After 1 week, polycarbonate brackets were bonded to first premolars with Transbond XT composite adhesive. Premolars were extracted after 28 days and tested for shear bond strength on a universal testing machine. Student's t-test was used to compare shear bond strengths of both groups. Results No statistically significant difference was found in bond strengths’ values between both groups. The test group (with CHX) has mean shear bond strength of 14.21 ± 2.42 MPa whereas the control group (without CHX) revealed a mean strength of 14.52 ± 2.31 MPa. Conclusion The use of 0.12% CHX mouth rinse, for one week before bonding, did not affect the shear bond strength of polycarbonate brackets bonded with Transbond composite. Furthermore, these brackets showed clinically acceptable bond strength. How to cite this article Hussein FA, Hashem MI, Chalisserry EP, Anil S. The Impact of Chlorhexidine Mouth Rinse on the Bond Strength of Polycarbonate Orthodontic Brackets. J Contemp Dent Pract 2014;15(6):688-692.

scholarly journals Effects of different bleaching methods on shear bond strengths of orthodontic brackets

2012 ◽  
Vol 83 (4) ◽  
pp. 686-690 ◽  
Author(s):  
Ahmet Yalcin Gungor ◽  
Erhan Ozcan ◽  
Huseyin Alkis ◽  
Hakan Turkkahraman
Keyword(s):  
Shear Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Group Iii ◽  
Group I ◽  
Human Enamel ◽  
Significant Difference ◽  
Bond Strengths ◽  
Group Ii ◽  
Method Group

ABSTRACT Objective: To evaluate the effects of different bleaching methods on the shear bond strength (SBS) of orthodontic brackets. Materials and Methods: Forty-five freshly extracted premolars were randomly divided into three groups (n  =  15 per group). In group I, bleaching was performed with the office bleaching method. In group II, bleaching was performed with the home bleaching method. Group III served as the control. Orthodontic brackets were bonded with a light cure composite resin and cured with an LED light. After bonding, the SBS of the brackets were tested with a Universal testing machine. Results: Analysis of variance indicated a significant difference between groups (P < .001). The highest values for SBS were measured in group III (20.99 ± 2.32 MPa). The SBS was significantly lower in groups I and II than in group III (P < .001). The lowest values for SBS were measured in group II (6.42 ± 0.81 MPa). SBS was significantly higher in group I than in group II (P < .001). Conclusions: Both of the bleaching methods significantly affected the SBS of orthodontic brackets on human enamel. Bleaching with the home bleaching method affected SBS more adversely than did bleaching with the office bleaching method.

scholarly journals Evaluation of permeability of root dentin after different irrigation protocols

2018 ◽  
Vol 146 (9-10) ◽  
pp. 492-497 ◽  
Author(s):  
Ljiljana Bjelovic ◽  
Jelena Krunic ◽  
Nikola Stojanovic ◽  
Jelena Eric ◽  
Tatjana Kanjevac
Keyword(s):  
New Combination ◽  
Control Group ◽  
Scanning Electron Microscopy Data ◽  
Test Results ◽  
Dye Penetration ◽  
Dentin Permeability ◽  
Significant Difference ◽  
Root Dentin ◽  
Microscopy Data ◽  
And Control

Introduction/Objective. This study was aimed at evaluating dentin permeability after irrigation with sodium hypochlorite (NaOCl) and final rinse with chlorhexidine (CHX), ethylenediamine tetraacetic acid (EDTA) + CHX, and new combination products: QMiX or MTAD. Methods. Roots of 60 maxillary incisors were randomly divided into five groups (n = 12) before instrumentation and irrigation with NaOCl according to the final irrigation regimen: CHX (2% CHX), EDTA + CHX (17% EDTA + 2% CHX), QMiX, MTAD, and control group (distilled water). After final irrigation, ten roots of each group were horizontally sectioned and dye penetration was evaluated in the coronal, middle, and apical thirds. Remaining samples were subjected to scanning electron microscopy. Data were analyzed with ANOVA/Tukey?s test. Results. Less dye penetration was found in CHX group compared with control as well as with QMiX and MTAD group in all thirds (p < 0.05). A significant difference between the control and EDTA + CHX, QMiX or MTAD group was observed only in the apical root third (p < 0.05). Conclusion. Dentin permeability was significantly reduced after final irrigation with CHX, but not after use of other final irrigation solutions, except in the apical third of the root canal.

scholarly journals Orthodontic brackets’ shear bond strengths after applying remineralizing agents

2021 ◽  
Vol 11 (2) ◽  
pp. 67-74
Author(s):  
Yusuf Özant ◽  
Yazgı Ay Ünüvar
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Orthodontic Brackets ◽  
Fluoride Varnish ◽  
Demineralized Enamel ◽  
Bond Strengths ◽  
Group 5 ◽  
Group 2 ◽  
Casein Phosphopeptide

Aim: The aim of this in vitro study was to measure the effects of white spot lesions treatment agents on the shear bond strengths (SBSs) and adhesive residual indexes (ARIs) of orthodontic brackets. Methodology: This study used 100 human premolar teeth randomly divided into five groups. Group 1 comprised those with intact enamel, Group 2 comprised those with demineralized enamel and Groups 3–5 comprised those demineralized enamel that was treated with casein phosphopeptide amorphous calcium phosphate fluoride (CPP-ACPF), fluoride varnish and a resin infiltrant, respectively. Brackets were bonded to the teeth using the conventional method, then the samples were thermocycled and tested for SBS using a universal testing machine. The adhesive remnant indexes (ARI) of the brackets were also evaluated. One-way ANOVA and post-hoc Tukey tests were used to compare the groups’ SBSs and the Kruskal–Wallis test was used to evaluate the groups’ ARI scores. Results were considered statistically significant if p was less than 0.05. Results: Statistically significant differences were found between the groups (F was 6.895 and p was less than 0.001). The SBSs of the brackets in Group 4 were significantly lower than those of the other groups (the mean was 13.44 ± 6.37 MPa). Group 5 had the highest mean SBS value (22.11 ± 6.56 MPa). Additionally, the ARI scores of the four groups were significantly different (p was less than 0.001). Conclusion: Resin infiltration and CPP-ACPF applications can improve bonds to demineralized enamel, while fluoride varnish applications are not recommended for such enamel.   How to cite this article: Özant Y, Ay Ünüvar Y. Orthodontic brackets’ shear bond strengths after applying remineralizing agents. Int Dent Res 2021;11(2):67-74. https://doi.org/10.5577/intdentres.2021.vol11.no2.3   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

Fracture Resistance of Premolar Teeth Restored with Different Filling Techniques

2005 ◽  
Vol 6 (3) ◽  
pp. 62-69 ◽  
Author(s):  
Luís Roberto Marcondes Martins ◽  
Fabiana Mantovani Gomes França ◽  
Luís Alexandre Maffei Sartini Paulillo ◽  
Claudia Cia Worschech ◽  
José Roberto Lovadino
Keyword(s):  
Fracture Resistance ◽  
Composite Resin ◽  
Adhesive System ◽  
Group Iv ◽  
Control Group ◽  
Steel Sphere ◽  
Group Iii ◽  
Group I ◽  
A Minor ◽  
Placement Technique

Abstract The aim of this study is to verify the fracture resistance of premolars with large mesiocclusodistal (MOD) preparations with composite resin using different incremental techniques when subjected to an occlusal load. Forty maxillary premolar teeth were randomly divided into four groups (n=10). Class II MOD cavities were prepared in all specimens with parallel walls and no approximal boxes. The resulting isthmus width was 1/3 the distance between the cusp tips and 3/4 the height of the crown. Teeth in group I, the control group, were not restored. Specimens in group II were restored in three incremental vertical layers. Group III specimens were restored in three horizontal layers, and finally, specimens in group IV were restored in oblique layers. With exception of the placement technique, specimens in groups II, III and IV were restored using the Single Bond adhesive system and P60 composite resin following manufacturer's recommendations. A 4 mm diameter steel sphere contacted the buccal and lingual cusps of the tested teeth at a crosshead speed of 0.5 mm/min until fracture occurred. The values obtained in this study were subjected to Analysis of Variance (ANOVA) and a Tukey–Kramer test. Only group I (non-restored) obtained a minor means of fracture resistance. No significant differences among groups II, III, and IV were found. This study shows on large MOD cavities the incremental filling techniques do not influence the fracture resistance of premolar teeth restored with composite resin. Citation França FMG, Worschech CC, Paulillo LAMS, Martins LRM, Lovadino JR. Fracture Resistance of Premolar Teeth Restored with Different Filling Techniques. J Contemp Dent Pract 2005 August;(6)3:062-069.

scholarly journals Bonding brackets on white spot lesions pretreated by means of two methods

2016 ◽  
Vol 21 (2) ◽  
pp. 39-44 ◽  
Author(s):  
Julia Sotero Vianna ◽  
Mariana Marquezan ◽  
Thiago Chon Leon Lau ◽  
Eduardo Franzotti Sant'Anna
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Adhesive System ◽  
White Spot ◽  
Control Group ◽  
White Spot Lesions ◽  
Demineralized Enamel ◽  
Infiltrant Resin

Abstract Objective: The aim of this study was to evaluate the shear bond strength (SBS) of brackets bonded to demineralized enamel pretreated with low viscosity Icon Infiltrant resin (DMG) and glass ionomer cement (Clinpro XT Varnish, 3M Unitek) with and without aging. Methods: A total of 75 bovine enamel specimens were allocated into five groups (n = 15). Group 1 was the control group in which the enamel surface was not demineralized. In the other four groups, the surfaces were submitted to cariogenic challenge and white spot lesions were treated. Groups 2 and 3 were treated with Icon Infiltrant resin; Groups 4 and 5, with Clinpro XT Varnish. After treatment, Groups 3 and 5 were artificially aged. Brackets were bonded with Transbond XT adhesive system and SBS was evaluated by means of a universal testing machine. Statistical analysis was performed by one-way analysis of variance followed by Tukey post-hoc test. Results: All groups tested presented shear bond strengths similar to or higher than the control group. Specimens of Group 4 had significantly higher shear bond strength values (p < 0.05) than the others. Conclusion: Pretreatment of white spot lesions, with or without aging, did not decrease the SBS of brackets.

scholarly journals The Effect of Different Storage Conditions on the Physical Properties of Pigmented Medical Grade I Silicone Maxillofacial Material

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Ayman A. Al-Dharrab ◽  
Seham B. Tayel ◽  
Mona H. Abodaya
Keyword(s):  
Surface Roughness ◽  
Physical Properties ◽  
Storage Conditions ◽  
Sem Analysis ◽  
Prosthetic Material ◽  
Control Group ◽  
Color Changes ◽  
Group I ◽  
Significant Difference ◽  
Before And After

Objective. This study aimed to evaluate the effect of different storage solutions that simulate acidic, alkaline, and sebum conditiions on the physical properties of pigmented (colorant elastomer) cosmesil M511 maxillofacial prosthetic material. Materials and Methods. Sixty specimens were prepared according to the manufacturer's instructions and were tested before and after immersion of different storage conditions for six months at 37 °C. The following tests were performed: color changes (group I), solution absorption (group II), surface roughness (group III), and scanning electron microscopy (group IV). Results. There were no significant changes observed in the color and solution absorption tests while surface roughness revealed significant difference between control group and other testing storage medium groups, and this result was supported by SEM analysis that revealed limited surface changes. Conclusions. Cosmaseil material is an acceptable cross-linked formulation that withstands storage in different solutions with variable pH. The addition of pigment cannot vary the physical properties of these materials. Surface roughness test as well as SEM microscopic study showed moderate changes indicating a limited effect on the surface of the material.

scholarly journals Effects of Potassium Nitrate and Oxalate Desensitizer Agents on Shear Bond Strengths of Orthodontic Brackets

2007 ◽  
Vol 77 (6) ◽  
pp. 1096-1100 ◽  
Author(s):  
Hakan Türkkahraman ◽  
Necdet Adanir
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Potassium Nitrate ◽  
Orthodontic Brackets ◽  
Group Iii ◽  
Group I ◽  
Halogen Light ◽  
Significant Difference ◽  
Bond Strengths

Abstract Objective: To evaluate the effects of potassium nitrate and oxalate desensitizer agents on shear bond strengths of orthodontic brackets. Materials and Methods: Forty-five extracted human premolar teeth were randomly assigned to three groups of 15 each. UltraEZ potassium nitrate desensitizer was applied on teeth in the first group, while BisBlock oxalate desensitizer was applied on teeth in the second group. The third group served as a control. Orthodontic brackets were bonded with a light cure composite resin and cured with a halogen light. After bonding, the shear bond strength of the brackets was tested with a universal testing machine. Results: The highest shear bond strengths were measured in Group III. The shear bond strength in Groups I and II was significantly lower than in Group III (P &lt; .001). Significant difference was also found between Group I and Group II (P &lt; .01). Conclusions: Orthodontic brackets bonded to enamel treated with potassium nitrate and oxalate desensitizers showed significantly lower bond strengths than did brackets bonded to untreated enamel.

scholarly journals Effects of an Antioxidant on the Shear Bond Strengths of Orthodontic Brackets After Conventional and Laser-Assisted Extra-Coronal Bleaching

2018 ◽  
Vol 20 (3) ◽  
pp. 71-79
Author(s):  
Funda Fundaoĝlu Küçükekenci DDS ◽  
Ahmet Serkan Küçükekenci DDS, PhD ◽  
Süleyman Kutalmiş Büyük DDS, PhD
Keyword(s):  
Bond Strength ◽  
Orthodontic Brackets ◽  
Sodium Ascorbate ◽  
Control Group ◽  
Bleaching Procedure ◽  
Human Enamel ◽  
Negative Effect ◽  
Group 3 ◽  
Bond Strengths ◽  
Group 2

Purpose: The purpose of this study was to evaluate the effects of the application of antioxidant on the shear bond strengths (SBS) of orthodontic brackets bonded to human enamel after extra-coronal bleaching with hydrogen peroxide (HP). Materials and methods: Fifty freshly extracted premolars were randomly divided into three groups. One group (Group 1) was bleached with 40% HP (n=20), another group (Group 2) was bleached with 40% HP and activated with an Nd: YAG laser (n=20), and a control group (Group 3) received no treatment (n=10). After the bleaching procedure, Groups 1 and 2 were further divided into two subgroups (Group 1a, Group 1b, Group 2a, and Group 2b). Specimens in Groups 1a and 2a (n=10) received no antioxidant application. A 10% sodium ascorbate solution was applied to specimens in Groups 1b and 2b (n=10). The brackets were then bonded with light-cure adhesive paste to the enamel surfaces of all experimental groups. Specimens were subjected to SBS tests for debonding. Results: The SBS of brackets bonded in Groups 1 and 2 were significantly lower than those of brackets bonded to the control group (p<0.001); however, no statistically significant differences in SBS were noted in Groups 1 and 2 (p>0.001). The antioxidant-treated SBS of brackets in Groups 1b and 2b were significantly higher than those of Groups 1a and 2a (p<0.001). Conclusions: The application of 40% HP had a negative effect on the bond strength. The use of antioxidant for 15 min resulted in the reversal of failed bond strength.

Sign in / Sign up

Export Citation Format

Share Document