scholarly journals Camouflage treatment of skeletal Class III malocclusion with multiloop edgewise arch wire and modified Class III elastics by maxillary mini-implant anchorage

2013 ◽  
Vol 83 (4) ◽  
pp. 630-640 ◽  
Author(s):  
Shushu He ◽  
Jinhui Gao ◽  
Peter Wamalwa ◽  
Yunji Wang ◽  
Shujuan Zou ◽  
...  
Keyword(s):  
Principal Component ◽  
Open Bite ◽  
Control Group ◽  
Vertical Position ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Skeletal Class ◽  
Mini Implants ◽  
Experimental Group ◽  
Lower Incisors

ABSTRACT Objective: To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Materials and Methods: Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Results: Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. Conclusions: The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.

scholarly journals Skeletal Class III Malocclusion with Lateral Open Bite and Facial Asymmetry Treated with Asymmetric Lower Molar Extraction and Lingual Appliance: A Case Report

2021 ◽  
Vol 18 (10) ◽  
pp. 5381
Author(s):  
Vo Truong Nhu Ngoc ◽  
Nguyen Thi Thu Phuong ◽  
Nguyen Viet Anh
Keyword(s):  
Case Report ◽  
Open Bite ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Skeletal Class ◽  
Facial Esthetics ◽  
Lingual Appliance ◽  
Lower Incisors ◽  
Mandibular Incisors ◽  
Molar Extraction

A skeletal Class III malocclusion with open bite tendency is considered very difficult to treat orthodontically without surgery. This case report describes the lingual orthodontic treatment of an adult skeletal Class III patient with mandibular deviation to the left side, lateral open bite, unilateral posterior crossbite, zero overbite and negative overjet. The lower incisors were already retroclined to compensate with the skeletal discrepancy. The patient was treated by asymmetric molar extraction in the mandibular arch to retract the lower incisors and correct the dental midline, with the help of intermaxillary elastics. Lingual appliance was used with over-torqued lower anterior teeth’s brackets to control the torque of mandibular incisors. After a 30-month treatment, satisfactory smile and facial esthetics and good occlusion was achieved. A 12-month follow-up confirmed that the outcome was stable. Asymmetric molar extraction could be a viable option to retract mandibular incisors in Class III malocclusion with lower dental midline deviation.

scholarly journals Analysis of MYO1H Gene Polymorphism in Skeletal Class-III Malocclusion Due to Mandibular Prognathism

2021 ◽  
Author(s):  
Anjana Atteeri ◽  
Praveen Kumar Neela ◽  
Pavan Kumar Mamillapalli ◽  
Vasu M. Sesham ◽  
Sreekanth Keesara ◽  
...  
Keyword(s):  
Local Population ◽  
Research Work ◽  
Control Group ◽  
Study Group ◽  
Genome Wide Association Studies ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Mandibular Prognathism ◽  
Skeletal Class ◽  
Increased Risk

Abstract Background Mandibular prognathism (MP) is a craniofacial deformity resulting from the combined effects of environmental and genetic factors. Although various linkage and genome-wide association studies for mandibular prognathism have identified multiple strongly associated regions and genes, the causal genes and variants responsible for the deformity remained ambiguous. Aim This research work was aimed to study the association between polymorphism rs10850110 of the MYO1H gene and skeletal class-III malocclusion in our local population. Materials and Methods Thirty patients with skeletal class III due to mandibular prognathism in the study group and 30 patients with skeletal class I in the control group were selected for this study. These patients were from both sexes and above age 10 years. Based on the cephalometric values, patients were categorized into study and control groups. SNB (angle between sella, nasion and point B at nasion) greater than 82 degrees with an ANB (angle between point A, nasion and point B at nasion) of less than 0 degrees in the study group and ANB (angle between point A, nasion and point B at nasion) of 2 to 4 degrees in the control group were categorized. The polymorphism (rs10850110) of the MYO1H gene was genotyped using polymerase chain reaction and restriction fragment length polymorphism. Associations were tested with SNP exact test using SNPstats software. Results The single-nucleotide polymorphism rs10850110 showed a statistically significant association with mandibular prognathism. The G allele of marker rs10850110 (5′ of myosin1H - MYO1H) was overrepresented when compared with the “A” allele in mandibular prognathism cases (p < 0.0001), and this was very significant. Conclusion These results suggest that the rs10850110 polymorphism of the MYO1H gene is associated with an increased risk for mandibular prognathism.

scholarly journals Analysis of Tongue Function from the Orthodontist’s Point of View: Not Only a Matter of Deglutition

2021 ◽  
Vol 11 (6) ◽  
pp. 2520
Author(s):  
Andrea Deregibus ◽  
Simone Parrini ◽  
Maria Chiara Domini ◽  
Jacopo Colombini ◽  
Tommaso Castroflorio
Keyword(s):  
Point Of View ◽  
Control Group ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Maxillary Hypoplasia ◽  
Skeletal Class ◽  
Posterior Crossbite ◽  
Rest Position ◽  
Functional Aspects ◽  
Angle Class Iii Malocclusion

Many studies report that maxillofacial growth is influenced by genetic and environmental elements and that incorrect breathing, chewing, sucking, and swallowing are promoting factors of malocclusion. This study aims to evaluate the function and the influence of the tongue positions in patients with Angle class III malocclusion, maxillary hypoplasia, and posterior crossbite. One hundred patients, aged between 6 and 12 years old, were enrolled for the study. In the first group, patients with a diagnosis of class III malocclusion, affected by maxillary hypoplasia, skeletal class III, and posterior dental crossbite were recruited. In the control group, not treated patients with no malocclusion, skeletal class I, and without posterior dental crossbite were selected. Regarding atypical deglutition, no statistical differences were reported between the two groups, and 14% of patients reported ankyloglossia. Statistical differences were found in tongue rest position and during the execution of “hold and pull” and “chuck” exercises. Results obtained in this observational study showed that the clinician (orthodontist or general dentist) should analyze the presence/absence of atypical swallowing, the anatomical and functional aspects, and the tongue behavior in the rest position.

scholarly journals Management of an Adult with Spaced Dentition, Class III Malocclusion and Open-bite Tendency

2011 ◽  
Vol 05 (01) ◽  
pp. 121-129 ◽  
Author(s):  
Demet Kaya ◽  
Tulin Ugur Taner
Keyword(s):  
Treatment Plan ◽  
Open Bite ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Skeletal Class ◽  
Anterior Teeth ◽  
Old Adult ◽  
Facial Pattern ◽  
Set Up ◽  
Tongue Thrust

ABSTRACTThe aim of this case report was to present the orthodontic treatment of an adult with spaced dentition, Class III malocclusion, and open-bite tendency. A 28.4-year-old adult woman was concerned about the unesthetic appearance of her spaced dentition localized at both upper and lower arches while smiling. She had a mild tongue thrust, hypertropic upper frenum, and mild speech difficulty while pronouncing “s”. Her profile was straight with prominent lips. Molar relationship was Class III on both sides. Anterior teeth were in an end-to-end relationship. Lower dental midline was deviated to the left side. Cephalometric analysis revealed a skeletal Class III relationship with hyperdivergent facial pattern. The treatment plan included myotherapeutic exercises for the tongue thrust habit and a diagnostic set-up for closure of diastemas. A strict retention protocol was followed combined with gingivoplasty, fiberotomy, and frenectomy procedures. All spaces were closed successfully, adequate overbite and overjet relationships were obtained, and tongue thrust habit and speech difficulty while pronouncing “s” were eliminated. Clinical and cephalometric results indicated the maintenance of the treatment outcome at 6-months post-retention period. (Eur J Dent 2011;5:121-129)

scholarly journals Characteristics of soft tissue profile in patients with skeletal class III

2006 ◽  
Vol 53 (3) ◽  
pp. 166-173 ◽  
Author(s):  
Zorana Stamenkovic ◽  
Nenad Nedeljkovic
Keyword(s):  
Soft Tissue ◽  
Clinical Examination ◽  
Vertical Direction ◽  
Control Group ◽  
Class Iii ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Soft Tissue Profile ◽  
School Of Dentistry ◽  
Experimental Group

Introduction: Patients with skeletal class III have typical characteristics of soft tissue profile. Aim: The aim of this study was to determine characteristics of soft tissue profile in patients with skeletal class III and to find possible significant differences between these patients and patients in the control group (without malocclusion in sagittal direction). Methods: Twenty patients of the Department of Orthodontics, Belgrade School of Dentistry, were included in this study. Average age in this group was 8 years and 5 months. In experimental group there were 13 girls and 7 boys. Changes in soft tissue profile by clinical examination, photographic and cephalometric analysis were determinated during the whole diagnostic procedure. In the clinical examination, type of profile, characteristics of lips, facial harmony in vertical direction and the angle of mandibular plane were analyzed. On lateral cephalometrics, the following parameters were measured and analyzed: sagittal parameters SNA, SNB and ANB and parameters in Schwarz, Ricketts and Holdaway analysis of soft tissue profile. Results: Patients in the experimental group had significantly different changes in soft tissue profile. It was the consequence of existing skeletal malocclusion in sagittal direction. Statistically, differences were significant (p<0.01) Conclusion: Measurements and analysis showed that patients had typical severe concave profile. Most often, the position of soft tissue structures did not compensate skeletal anomalies.

scholarly journals Nonsurgical treatment of a hyperdivergent skeletal Class III patient with mini-screw–assisted mandibular dentition distalization and flattening of the occlusal plane

2021 ◽  
Author(s):  
Yiruo He ◽  
Yangyang Wang ◽  
Xinghai Wang ◽  
Jiangyue Wang ◽  
Ding Bai ◽  
...  
Keyword(s):  
Treatment Plan ◽  
Open Bite ◽  
Nonsurgical Treatment ◽  
Occlusal Plane ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Anterior Open Bite ◽  
Skeletal Class ◽  
Posterior Crossbite ◽  
Mandibular Plane

ABSTRACT Treatment of hyperdivergent skeletal Class III malocclusion is challenging for orthodontists, and orthognathic-orthodontic treatment is usually required. This report presents the successful nonsurgical treatment of a 20-year-old man who had a skeletal Class III malocclusion with anterior open bite, anterior and posterior crossbite, hyperdivergent growth pattern, steep occlusal plane, early loss of three first molars, and an uncommon convex profile with a retruded chin. An orthodontic camouflage treatment plan was chosen based on the etiology and the patient's complaints. Tooth #37 was extracted. Miniscrews were used for uprighting and intruding of the lower molars, distalization of the lower dentition, and flattening of the occlusal plane. After 34 months of active treatment, Class I relationships, proper anterior overjet and overbite, flat occlusal plane, and an esthetic facial profile were achieved. The results demonstrated that the biomechanics involved in the nonsurgical treatment assisted with miniscrews to distalize the mandibular dentition and flatten the occlusal plane while keeping the mandibular plane stable was effective for treating this hyperdivergent skeletal Class III patient with a convex profile and anterior open bite.

scholarly journals Multiloop Edgewise Arch-wire Technique for Skeletal Class III Openbite: A Case Report

2018 ◽  
Vol 7 (2) ◽  
pp. 56-59
Author(s):  
Dharma Laxmi Basukala
Keyword(s):  
Case Report ◽  
Morphological Characteristics ◽  
Open Bite ◽  
Occlusal Plane ◽  
Fourth Quadrant ◽  
Third Molars ◽  
Class Iii ◽  
High Angle ◽  
Class Iii Malocclusion ◽  
Skeletal Class

Skeletal Class III with openbite is one of the most difficult malocclusion to treat orthodontically. Generally, the morphological characteristics of this malocclusion are poor antero-posterior growth of the maxilla or excessive growth of the mandible with high angle. An 18-year-old male had Class III malocclusion with retrognathic maxilla and normal mandible with high angle. All third molars except on fourth quadrant were extracted to eliminate the posterior crowding. Multiloop Edgewise Arch-wire (MEAW) technique was used to upright the mesially inclined buccal teeth and to correct occlusal plane. In nine month time,  anterior cross bite and open bite were corrected; normal overjet, overbite and Class I canine relation were achieved.

scholarly journals Three-dimensional analysis of molar compensation in patients with facial asymmetry and mandibular prognathism

2015 ◽  
Vol 86 (3) ◽  
pp. 421-430 ◽  
Author(s):  
Svetlana Tyan ◽  
Hong-Sik Park ◽  
Munkhshur Janchivdorj ◽  
Sun-Ho Han ◽  
Su-Jung Kim ◽  
...  
Keyword(s):  
Facial Asymmetry ◽  
Root Apex ◽  
Occlusal Plane ◽  
Control Group ◽  
Class Iii ◽  
Mandibular Prognathism ◽  
Skeletal Class ◽  
Mandibular Asymmetry ◽  
Experimental Group ◽  
Maxillary Arch

ABSTRACT Objective:  To evaluate the characteristic transverse dental compensations in patients with facial asymmetry and mandibular prognathism and to compare features of dental compensations between two types of mandibular asymmetry using 3-dimensional (3D) cone-beam computed tomography (CBCT). Materials and Methods:  Seventy-eight adult patients with skeletal Class I (control group; n  =  33; 19 men and 14 women) or skeletal Class III with facial asymmetry (experimental group; n  =  45; 23 men and 22 women) were included. The experimental group was subdivided into two groups according to the type of mandibular asymmetry: translation type (T-type; n  =  20) and roll type (R-type; n  =  19). CBCT images were acquired before orthodontic treatment and 3D analyses were performed. Results:  The transverse dental distance was significantly different between the two groups only at the palatal root apex of the maxillary first molar (P &lt; .05). In the experimental group, the first molar axes were compensated significantly on both arches except the maxillary nondeviated side. The vertical molar heights were different between the two groups only on the maxillary arch (P &lt; .001). The R-type showed greater mandibular ramal length difference and menton deviation than the T-type (P &lt; .001). In the R-type, transverse compensation of the maxillary first molars was more obvious than with the T-type, which resulted in canting in the maxillary occlusal plane. Conclusions:  Mandibular asymmetry with prognathism showed a characteristic transverse dental compensation pattern. The mandibular asymmetry type influenced the amount and direction of molar compensation on the maxillary arch.

scholarly journals Stability Factors After Double-Jaw Surgery in Class III Malocclusion

2008 ◽  
Vol 78 (6) ◽  
pp. 1141-1152 ◽  
Author(s):  
Manuela Mucedero ◽  
Antonella Coviello ◽  
Tiziano Baccetti ◽  
Lorenzo Franchi ◽  
Paola Cozza
Keyword(s):  
Clinical Trials ◽  
Treatment Strategies ◽  
Control Group ◽  
Quality Level ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Medical Subject Headings ◽  
Method Error ◽  
Skeletal Class ◽  
Jaw Surgery

Abstract Objective: To identify the stability factors of skeletal Class III malocclusion after double-jaw surgery by a systematic review of the literature. Materials and Methods: The survey covered the period from September 1959 to October 2007 and used the MeSH, Medical Subject Headings. The inclusion criteria were stability of bimaxillary surgery of the permanent dentition, adult patients with skeletal Class III malocclusion, a follow-up of at least 12 months, randomized and nonrandomized controlled clinical trials (RCCTs; CCTs), prospective and retrospective studies with and without concurrent untreated as well as normal controls, and clinical trials (CTs) comparing at least two treatment strategies without any untreated or normal control group. Results: The search strategy resulted in 1783 articles. After selection according to the inclusion/ exclusion criteria, 15 articles qualified for the final review analysis. Quality was low in two studies, medium in twelve, and medium/high in one article, which was represented by a RCT (randomized clinical trial). Most of the studies had sufficient sample size, method error analysis, and adequate statistical methods. Thus, the quality level of the studies was sufficient to draw evidence-based conclusions. Conclusions: Surgical correction of skeletal Class III malocclusion after combined maxillary and mandibular procedures appears to be stable for maxillary advancements up to 5 mm and for the correction of presurgical sagittal intermaxillary discrepancies smaller than 7 mm.

Sign in / Sign up

Export Citation Format

Share Document