scholarly journals Stability Factors After Double-Jaw Surgery in Class III Malocclusion

2008 ◽  
Vol 78 (6) ◽  
pp. 1141-1152 ◽  
Author(s):  
Manuela Mucedero ◽  
Antonella Coviello ◽  
Tiziano Baccetti ◽  
Lorenzo Franchi ◽  
Paola Cozza

Abstract Objective: To identify the stability factors of skeletal Class III malocclusion after double-jaw surgery by a systematic review of the literature. Materials and Methods: The survey covered the period from September 1959 to October 2007 and used the MeSH, Medical Subject Headings. The inclusion criteria were stability of bimaxillary surgery of the permanent dentition, adult patients with skeletal Class III malocclusion, a follow-up of at least 12 months, randomized and nonrandomized controlled clinical trials (RCCTs; CCTs), prospective and retrospective studies with and without concurrent untreated as well as normal controls, and clinical trials (CTs) comparing at least two treatment strategies without any untreated or normal control group. Results: The search strategy resulted in 1783 articles. After selection according to the inclusion/ exclusion criteria, 15 articles qualified for the final review analysis. Quality was low in two studies, medium in twelve, and medium/high in one article, which was represented by a RCT (randomized clinical trial). Most of the studies had sufficient sample size, method error analysis, and adequate statistical methods. Thus, the quality level of the studies was sufficient to draw evidence-based conclusions. Conclusions: Surgical correction of skeletal Class III malocclusion after combined maxillary and mandibular procedures appears to be stable for maxillary advancements up to 5 mm and for the correction of presurgical sagittal intermaxillary discrepancies smaller than 7 mm.

Author(s):  
Anjana Atteeri ◽  
Praveen Kumar Neela ◽  
Pavan Kumar Mamillapalli ◽  
Vasu M. Sesham ◽  
Sreekanth Keesara ◽  
...  

Abstract Background Mandibular prognathism (MP) is a craniofacial deformity resulting from the combined effects of environmental and genetic factors. Although various linkage and genome-wide association studies for mandibular prognathism have identified multiple strongly associated regions and genes, the causal genes and variants responsible for the deformity remained ambiguous. Aim This research work was aimed to study the association between polymorphism rs10850110 of the MYO1H gene and skeletal class-III malocclusion in our local population. Materials and Methods Thirty patients with skeletal class III due to mandibular prognathism in the study group and 30 patients with skeletal class I in the control group were selected for this study. These patients were from both sexes and above age 10 years. Based on the cephalometric values, patients were categorized into study and control groups. SNB (angle between sella, nasion and point B at nasion) greater than 82 degrees with an ANB (angle between point A, nasion and point B at nasion) of less than 0 degrees in the study group and ANB (angle between point A, nasion and point B at nasion) of 2 to 4 degrees in the control group were categorized. The polymorphism (rs10850110) of the MYO1H gene was genotyped using polymerase chain reaction and restriction fragment length polymorphism. Associations were tested with SNP exact test using SNPstats software. Results The single-nucleotide polymorphism rs10850110 showed a statistically significant association with mandibular prognathism. The G allele of marker rs10850110 (5′ of myosin1H - MYO1H) was overrepresented when compared with the “A” allele in mandibular prognathism cases (p < 0.0001), and this was very significant. Conclusion These results suggest that the rs10850110 polymorphism of the MYO1H gene is associated with an increased risk for mandibular prognathism.


2021 ◽  
Vol 11 (6) ◽  
pp. 2520
Author(s):  
Andrea Deregibus ◽  
Simone Parrini ◽  
Maria Chiara Domini ◽  
Jacopo Colombini ◽  
Tommaso Castroflorio

Many studies report that maxillofacial growth is influenced by genetic and environmental elements and that incorrect breathing, chewing, sucking, and swallowing are promoting factors of malocclusion. This study aims to evaluate the function and the influence of the tongue positions in patients with Angle class III malocclusion, maxillary hypoplasia, and posterior crossbite. One hundred patients, aged between 6 and 12 years old, were enrolled for the study. In the first group, patients with a diagnosis of class III malocclusion, affected by maxillary hypoplasia, skeletal class III, and posterior dental crossbite were recruited. In the control group, not treated patients with no malocclusion, skeletal class I, and without posterior dental crossbite were selected. Regarding atypical deglutition, no statistical differences were reported between the two groups, and 14% of patients reported ankyloglossia. Statistical differences were found in tongue rest position and during the execution of “hold and pull” and “chuck” exercises. Results obtained in this observational study showed that the clinician (orthodontist or general dentist) should analyze the presence/absence of atypical swallowing, the anatomical and functional aspects, and the tongue behavior in the rest position.


2008 ◽  
Vol 78 (3) ◽  
pp. 561-573 ◽  
Author(s):  
Laura De Toffol ◽  
Chiara Pavoni ◽  
Tiziano Baccetti ◽  
Lorenzo Franchi ◽  
Paola Cozza

Abstract Objective: To assess the scientific evidence on the effectiveness of early orthopedic treatment in Class III subjects. Materials and Methods: A literature survey was performed by applying the Medline database (Entrez PubMed). The survey covered the period from January 1966 to December 2005 and used the Medical Subject Headings (MeSH). The following study types that reported data on the effects of Class III treatment with orthopedic appliances (facial mask, chincup, FR-3) on intermaxillary sagittal and vertical relationships were included: randomized clinical trials (RCTs), and prospective and retrospective longitudinal controlled clinical trials (CCTs) with untreated Class III controls. Results: The search strategy resulted in 536 articles. After selection according to criteria for inclusion and exclusion, 19 articles qualified for the final review analysis. One RCT and 18 CCTs were retrieved. Conclusion: The quality standard of the retrieved investigations ranged from low (four studies) to medium/high (five studies). Data derived from medium/high quality research described over 75% of success of orthopedic treatment of Class III malocclusion (RME and facial mask therapy) at a follow-up observation 5 years after the end of orthopedic treatment.


2010 ◽  
Vol 21 (2) ◽  
pp. 332-338 ◽  
Author(s):  
Seung-Hak Baek ◽  
Hyo-Won Ahn ◽  
Yoon-Hee Kwon ◽  
Jin-Young Choi

2013 ◽  
Vol 83 (4) ◽  
pp. 630-640 ◽  
Author(s):  
Shushu He ◽  
Jinhui Gao ◽  
Peter Wamalwa ◽  
Yunji Wang ◽  
Shujuan Zou ◽  
...  

ABSTRACT Objective: To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Materials and Methods: Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Results: Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. Conclusions: The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.


2017 ◽  
Vol 18 (5) ◽  
pp. 410-414
Author(s):  
Mohamed I Hashem ◽  
Zeeshan H Ahmad ◽  
Sukumaran Anil ◽  
Khalid J Alanazi

ABSTRACT Introduction Chin cup (CC) therapy has been used as the traditional appliance for treating class III malocclusion during mixed dentition period. The aim of this study was to investigate the effect of CC on the improvement of skeletal and dentoalveolar skeletal changes in class III patients during mixed dentition stage. Materials and methods A total of 30 patients (7–9 years old) with skeletal class III malocclusion were selected based on clinical and cephalometric examination. Out of 30 patients, 20 underwent CC therapy. All orthodontic records and measurements were taken before and after treatment. Similar records were collected from the control group. The lateral cephalometric films were traced before and after treatment and analyzed. Results There was a significant improvement in maxillary and the mandibular skeletal measurements after CC therapy. Improvement of ANB angle and an increase in Wits appraisal have been detected in the treated group according to intermaxillary skeletal variables. Conclusion The study concluded that the CC therapy is effective for correcting skeletal class III malocclusion along with positive changes in the dentoskeletal variables during the mixed dentition stage. How to cite this article Al-Khalifa HN, Hashem MI, Alanazi KJ, Anil S. Orthopedic Effect of Chin Cup during Mixed Dentition Stage. J Contemp Dent Pract 2017;18(5):410-414.


2019 ◽  
Vol 42 (2) ◽  
pp. 187-192 ◽  
Author(s):  
Roberto Martina ◽  
Vincenzo D’Antò ◽  
Vittoria De Simone ◽  
Angela Galeotti ◽  
Roberto Rongo ◽  
...  

Summary Objective To evaluate dental and skeletal effects of a new orthopaedic appliance for the treatment of Class III malocclusion in growing patients. Material and methods This retrospective cephalometric study was performed on a sample of 18 patients with a skeletal Class III malocclusion (4 males; 14 females; mean age 8.8 ± 1.5 years) treated with the Pushing Splints 3 (PS3) protocol. The control group consisted of 18 subjects (5 males; 13 females; mean age 9.1 ± 1.8 years) selected from a database of subjects with untreated Class III malocclusion. The cephalometric analysis was performed at the beginning (T0) and the end of the orthopaedic therapy (T1). Significant differences between the treated and control groups were assessed with independent samples t-test (P &lt; 0.05). Results In the PS3 group, the post-treatment cephalometric values showed a forward displacement of the maxilla, resulting in a statistically significant increase of the SNA angle. ANPg and Wits appraisal improved significantly compared with the control group. Lingual inclination of mandibular incisors and buccal inclination of the upper incisors were significantly increased in comparison with the control group. No significant differences were recorded for backward mandibular rotation. Limitations This study presents a short-term evaluation of the treatment and the use of a historical control group. Conclusions The PS3 was effective for the treatment of Class III malocclusion in growing patients, with favourable maxillary advancement and control of the vertical skeletal relationships.


Sign in / Sign up

Export Citation Format

Share Document