Transfer of Human Preference to Smart Machines: A Case Study of Human Thermal Comfort Control

Author(s):  
Clifford C. Federspiel ◽  
Haruhiko Asada
2020 ◽  
Vol 12 (19) ◽  
pp. 8123
Author(s):  
Jingming Qian ◽  
Shujiang Miao ◽  
Nigel Tapper ◽  
Jianguang Xie ◽  
Greg Ingleton

Extreme summertime heat is becoming a major issue for aircraft operations. As global temperatures continue to rise, some of the heaviest planes on the longest flights may eventually be unable to depart during the hottest part of summer days. During summer days, some airports have to reduce the payload of aircraft, including cargo and/or passengers in the hotter days of summer. Nonetheless, there is no existing body of research on the potential for airport cooling. Furthermore, extreme heat on the ground also affects airport workers; loading and unloading luggage and servicing platforms between flights could become more arduous. With global warming proceeding, it is becoming increasingly urgent to find a suitable strategy to cool airport environments, perhaps by irrigation of a vegetated landscape. All airports have large enclosed areas (usually of grass) acting as a buffer between airport activities and the adjacent industrial, commercial and residential land utilization. This paper describes the trial of irrigating the buffer area of Adelaide airport and analyzes the performance of irrigation cooling for Adelaide airport, examining whether this can benefit human thermal comfort. Results indicate that irrigation provides cooling, and the cooling effect reduces along with the increasing instance from the middle of the irrigation area. At 15:00, the average air temperature was 1.8 °C cooler in the middle of the irrigation area than in the non-irrigation area, and the relative humidity was 5.8% higher during the trial period. On an extremely hot day (the maximum air temperature was 45.4 °C), it was 1.5 °C cooler in the middle of the irrigation area than upwind the of irrigation area, and 0.8 °C cooler than downwind of the irrigation area at 13:00. Human thermal comfort (HTC) is unfavorable in the runway, but greater improvements can be made through promotion of irrigation.


2021 ◽  
pp. 108246
Author(s):  
Hélder Silva Lopes ◽  
Paula C. Remoaldo ◽  
Vítor Ribeiro ◽  
Javier Martín-Vide

2018 ◽  
Vol 39 (5) ◽  
pp. 572-589 ◽  
Author(s):  
S Samiuddin ◽  
Ismail M Budaiwi

In high-occupancy intermittently operated buildings such as mosques and auditoriums, maintaining an acceptable thermal environment may present a challenging task. Variations in the operation and the thermal loads can result in variable and non-uniform thermal comfort conditions when the HVAC system is not properly designed. Non-uniformity of the thermal environment is greatly influenced by the design and scheme of the air distribution system. Mosques, with their distinctive five intermittent short occupancies and the non-fixed posture of occupants, present a unique case for investigation. In this study, the effect of air distribution of various schemes of a ceiling-based system on the thermal comfort in mosques is investigated. Air diffusion performance index and Fanger’s PMV method are used to assess thermal comfort. Three air distribution schemes at four diffuser terminal velocities were studied using the EnergyPlus and computational fluid dynamics techniques. Results indicate major variations in air diffusion performance index with each air distribution scheme type and diffuser terminal velocity. The uniformity of the PMV was entirely dependent on the air diffusion performance index value and exhibited large variations when the air diffusion performance index value was low. In most cases, the space was overcooled with an average PMV of −0.66 or below. Practical application: The effect of air distribution system design on human thermal comfort has been very complex to understand, as it involves different schemes and different diffuser discharge velocities. This study will help engineers and designers in designing better thermal environment for the occupants.


2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
A. M. Abdel-Ghany ◽  
I. M. Al-Helal ◽  
M. R. Shady

To protect humans from heat stress risks, thermal comfort and heat stress potential were evaluated under arid environment, which had never been made for such climate. The thermal indices THI, WBGT, PET, and UTCI were used to evaluate thermal comfort and heat stress. RayMan software model was used to estimate the PET, and the UTCI calculator was used for UTCI. Dry and wet bulb temperatures (Td,Tw), natural wet bulb temperature (Tnw), and globe temperature (Tg) were measured in a summer day to be used in the calculation. The results showed the following. (i) The thermal sensation and heat stress levels can be evaluated by either the PET or UTCI scales, and both are valid for extremely high temperature in the arid environment. (ii) In the comfort zone, around 75% of individuals would be satisfied with the surrounding environment and feel comfortable during the whole day. (iii) Persons are exposed to strong heat stress and would feel uncomfortable most of the daytime in summer. (iv) Heat fatigue is expected with prolonged exposure to sun light and activity. (v) During the daytime, humans should schedule their activities according to the highest permissible values of the WBGT to avoid thermal shock.


ICCREM 2020 ◽  
2020 ◽  
Author(s):  
Boshuai Dong ◽  
Chunjing Shang ◽  
Ming Tong ◽  
Jianhong Cai

2017 ◽  
Vol 16 (9) ◽  
pp. 2097-2111 ◽  
Author(s):  
Mohanadoss Ponraj ◽  
Yee Yong Lee ◽  
Mohd Fadhil Md Din ◽  
Zainura Zainon Noor ◽  
Kenzo Iwao ◽  
...  

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3061 ◽  
Author(s):  
Shazia Noor ◽  
Hadeed Ashraf ◽  
Muhammad Sultan ◽  
Zahid Mahmood Khan

This study provides comprehensive details of evaporative cooling options for building air-conditioning (AC) in Multan (Pakistan). Standalone evaporative cooling and standalone vapor compression AC (VCAC) systems are commonly used in Pakistan. Therefore, seven AC system configurations comprising of direct evaporative cooling (DEC), indirect evaporative cooling (IEC), VCAC, and their possible combinations, are explored for the climatic conditions of Multan. The study aims to explore the optimum AC system configuration for the building AC from the viewpoints of cooling capacity, system performance, energy consumption, and CO2 emissions. A simulation model was designed in DesignBuilder and simulated using EnergyPlus in order to optimize the applicability of the proposed systems. The standalone VCAC and hybrid IEC-VCAC & IEC-DEC-VCAC system configurations could achieve the desired human thermal comfort. The standalone DEC resulted in a maximum COP of 4.5, whereas, it was 2.1 in case of the hybrid IEC-DEC-VCAC system. The hybrid IEC-DEC-VCAC system achieved maximum temperature gradient (21 °C) and relatively less CO2 emissions as compared to standalone VCAC. In addition, it provided maximum cooling capacity (184 kW for work input of 100 kW), which is 85% higher than the standalone DEC system. Furthermore, it achieved neutral to slightly cool human thermal comfort i.e., 0 to −1 predicted mean vote and 30% of predicted percentage dissatisfied. Thus, the study concludes the hybrid IEC-DEC-VCAC as an optimum configuration for building AC in Multan.


Sign in / Sign up

Export Citation Format

Share Document