scholarly journals Improving BER Performance of Massive MIMO Scheme over Rayleigh Fading Channel

2021 ◽  
Vol 5 (6) ◽  
pp. 58-63
Author(s):  
Moses M. Fakunle ◽  
Kazeem B. Adedeji ◽  
Yekeen O. Olasoji
Keyword(s):  
Genetic Algorithm ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
System Capacity ◽  
Software Environment ◽  
Filter Bank Multicarrier ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Effective Transmission ◽  
Ber Performance

In massive multiple input multiple output (mMIMO) scheme, the system capacity can be improved without additional bandwidth or transmit power by using a huge antenna array at base station with as much separation between antenna elements as possible. Unfortunately, its performance depends on having a perfect channel state estimate between the base state and the users. In this paper, the bit error rate (BER) performance of a mMIMO scheme is improved using genetic algorithm-based optimization with simulation performed in MATLAB software environment. The genetic algorithm used selects the best signal required for effective transmission. Four different antenna configurations in the order of 2x2, 4x4, 8x8 and 16x16 were considered for the simulation. The encoding and decoding were done using an STBC coded. Also, filter bank multicarrier-offset quadrature amplitude modulation (FBMC-OQAM) scheme was used and simulation was carried out for 4-FBMC-OQAM, 16 FBMC-OQAM, and 64 FBMC-OQAM order. The BER is computed for both the optimized and un-optimized mMIMO schemes, and the performance of both schemes is compared. Simulation results show a significant improvement in the BER of the optimized mMIMO compared to the normal (coded) MIMO scheme. The overall results show that the optimized mMIMO experience a reduced BER when compared to the normal mMIMO. In both cases, the BER reduces gradually as the number of antenna increases.

A companding approach for PAPR suppression in OFDM based massive MIMO system

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajay Kumar Yadav ◽  
Pritam Keshari Sahoo ◽  
Yogendra Kumar Prajapati
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Average Power ◽  
Base Station ◽  
Convex Optimization Problem ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mimo Ofdm

Abstract Orthogonal frequency division multiplexing (OFDM) based massive multiuser (MU) multiple input multiple output (MIMO) system is popularly known as high peak-to-average power ratio (PAPR) issue. The OFDM-based massive MIMO system exhibits large number of antennas at Base Station (BS) due to the use of large number of high-power amplifiers (HPA). High PAPR causes HPAs to work in a nonlinear region, and hardware cost of nonlinear HPAs are very high and also power inefficient. Hence, to tackle this problem, this manuscript suggests a novel scheme based on the joint MU precoding and PAPR minimization (PP) expressed as a convex optimization problem solved by steepest gradient descent (GD) with μ-law companding approach. Therefore, we develop a new scheme mentioned to as MU-PP-GDs with μ-law companding to minimize PAPR by compressing and enlarging of massive MIMO OFDM signals simultaneously. At CCDF = 10−3, the proposed scheme (MU-PP-GDs with μ-law companding for Iterations = 100) minimizes the PAPR to 3.70 dB which is better than that of MU-PP-GDs, (iteration = 100) as shown in simulation results.

scholarly journals Genetic Algorithm-Based Beam Refinement for Initial Access in Millimeter Wave Mobile Networks

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Hao Guo ◽  
Behrooz Makki ◽  
Tommy Svensson
Keyword(s):  
Genetic Algorithm ◽  
Millimeter Wave ◽  
Mobile Networks ◽  
System Performance ◽  
Multiple Input Multiple Output ◽  
Hardware Impairments ◽  
Mimo Networks ◽  
Multiple Input ◽  
Input Multiple Output ◽  
High Carrier

Initial access (IA) is identified as a key challenge for the upcoming 5G mobile communication system operating at high carrier frequencies, and several techniques are currently being proposed. In this paper, we extend our previously proposed efficient genetic algorithm- (GA-) based beam refinement scheme to include beamforming at both the transmitter and the receiver and compare the performance with alternative approaches in the millimeter wave multiuser multiple-input-multiple-output (MU-MIMO) networks. Taking the millimeter wave communications characteristics and various metrics into account, we investigate the effect of different parameters such as the number of transmit antennas/users/per-user receive antennas, beamforming resolutions, and hardware impairments on the system performance employing different beam refinement algorithms. As shown, our proposed GA-based approach performs well in delay-constrained networks with multiantenna users. Compared to the considered state-of-the-art schemes, our method reaches the highest service outage-constrained end-to-end throughput with considerably less implementation complexity. Moreover, taking the users’ mobility into account, our GA-based approach can remarkably reduce the beam refinement delay at low/moderate speeds when the spatial correlation is taken into account. Finally, we compare the cases of collaborative users and noncollaborative users and evaluate their difference in system performance.

scholarly journals Beam division multiple access for millimeter wave massive MIMO: Hybrid zero-forcing beamforming with user selection

2022 ◽  
Vol 12 (1) ◽  
pp. 445
Author(s):  
Hong Son Vu ◽  
Kien Truong ◽  
Minh Thuy Le
Keyword(s):  
Multiple Access ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Zero Forcing ◽  
Multiuser Interference ◽  
Novel Approach ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Promising Solution

<p>Massive multiple-input multiple-output (MIMO) systems are considered a promising solution to minimize multiuser interference (MUI) based on simple precoding techniques with a massive antenna array at a base station (BS). This paper presents a novel approach of beam division multiple access (BDMA) which BS transmit signals to multiusers at the same time via different beams based on hybrid beamforming and user-beam schedule. With the selection of users whose steering vectors are orthogonal to each other, interference between users is significantly improved. While, the efficiency spectrum of proposed scheme reaches to the performance of fully digital solutions, the multiuser interference is considerably reduced.</p>

scholarly journals Deep Scanning—Beam Selection Based on Deep Reinforcement Learning in Massive MIMO Wireless Communication System

Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1844
Author(s):  
Minhoe Kim ◽  
Woongsup Lee ◽  
Dong-Ho Cho
Keyword(s):  
Communication Systems ◽  
Large Scale ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Q Learning ◽  
Multiple Input ◽  
Beam Selection ◽  
Input Multiple Output ◽  
Optimal Beam ◽  
Resource Allocation Scheme

In this paper, we investigate a deep learning based resource allocation scheme for massive multiple-input-multiple-output (MIMO) communication systems, where a base station (BS) with a large scale antenna array communicates with a user equipment (UE) using beamforming. In particular, we propose Deep Scanning, in which a near-optimal beamforming vector can be found based on deep Q-learning. Through simulations, we confirm that the optimal beam vector can be found with a high probability. We also show that the complexity required to find the optimum beam vector can be reduced significantly in comparison with conventional beam search schemes.

scholarly journals Efficient Wireless Broadcasting through Joint Network Coding and Beamforming

2012 ◽  
Vol 2012 ◽  
pp. 1-15 ◽  
Author(s):  
Monchai Lertsutthiwong ◽  
Thinh Nguyen ◽  
Bechir Hamdaoui
Keyword(s):  
Network Coding ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Broadcast Channels ◽  
Achievable Throughput ◽  
Transmission Opportunity ◽  
Mobile Stations ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Multiple Transmit

We develop a framework that exploits network coding (NC) and multiple-input/multiple-output (MIMO) techniques, jointly together, to improve throughput of downlink broadcast channels. Specifically, we consider a base station (BS) equipped with multiple transmit antennas that serves multiple mobile stations (MSs) simultaneously by generating multiple signal beams. Given the large number of MSs and the small number of transmit antennas, the BS must decide, at any transmission opportunity, which group of MSs it should transmit packets to, in order to maximize the overall throughput. We propose two algorithms for grouping MSs that take advantage of NC and the orthogonality of user channels to improve the overall throughput. Our results indicate that the proposed techniques increase the achievable throughput significantly, especially in highly lossy environments.

scholarly journals Gyre Precoding and T-Transformation-Based GFDM System for UAV-Aided mMTC Network

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2915
Author(s):  
Joarder Jafor Sadique ◽  
Shaikh Enayet Ullah ◽  
Raad Raad ◽  
Md. Rabiul Islam ◽  
Md. Mahbubar Rahman ◽  
...  
Keyword(s):  
Channel Coding ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Mobility Model ◽  
Base Station ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Aerial Vehicle ◽  
Noise Ratio ◽  
User Interference

In this paper, an unmanned aerial vehicle (UAV)-aided multi-antenna configured downlink mmWave cooperative generalized frequency division multiplexing (GFDM) system is proposed. To provide physical layer security (PLS), a 3D controlled Lorenz mapping system is introduced. Furthermore, the combination of T-transformation spreading codes, walsh Hadamard transform, and discrete Fourier transform (DFT) techniques are integrated with a novel linear multi-user multiple-input multiple-output (MU-MIMO) gyre precoding (GP) for multi-user interference reduction. Furthermore, concatenated channel-coding with multi-user beamforming weighting-aided maximum-likelihood and zero forcing (ZF) signal detection schemes for an improved bit error rate (BER) are also used. The system is then simulated with a single base station (BS), eight massive machine-type communications (mMTC) users, and two UAV relay stations (RSs). Numerical results reveal the robustness of the proposed system in terms of PLS and an achievable ergodic rate with signal-to-interference-plus-noise ratio (SINR) under the implementation of T-transformation scheme. By incorporating the 3D mobility model, brownian perturbations of the UAVs are also analyzed. An out-of-band (OOB) reduction of 320 dB with an improved BER of 1×10−4 in 16-QAM for a signal-to-noise ratio, Eb/N0, of 20 dB is achieved.

scholarly journals Spectral Efficiency Improvement Techniques In Massive Mimo For 5G Communications

2021 ◽  
Vol 12 (2) ◽  
pp. 1457-1465
Author(s):  
Naraiah R , Et. al.
Keyword(s):  
Spectral Efficiency ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Broad Band ◽  
Cell System ◽  
Base Station ◽  
Information Rate ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Long Time

Wireless communications has gotten one of the quickest developing zones in our advanced life and makes colossal effect on practically every component of our day by day life. 5G should support a large number of new applications with a wide assortment of prerequisites, including higher pinnacle and client information rates, diminished dormancy, improved indoor inclusion, expanded number of gadgets, etc. The normal traffic development in at least a long time from now can be fulfilled by the consolidated utilization of more range, higher spectral efficiency, and densification of cells. The increment in spectral effectiveness will improve the throughput of the system which straightforwardly serves the Enhanced Mobile Broad band use instance of the 5G assistance. In massive Multiple-Input Multiple-Output (M-MIMO) systems few hundred quantities of antennas are conveyed at each base station (BS) to serve a moderately modest number of single-reception apparatus terminals with multiuser, giving higher information rate and lower idleness. Massive Multiple-Input Multiple-Output is the arising innovation in cell system for higher information rate correspondence. It utilizes enormous number of communicating reception apparatus at the base station which is made conceivable by the radio wire cluster which can be electronically steerable and adequately utilized for shaft framing. Spectral proficiency is the vital boundary to be improved in expanding throughput. The system execution under different commonsense limitations and conditions, for example, restricted soundness block length, number of base station (BS) antennas, and number of dynamic clients are assessed through simulation.  

scholarly journals A Deep Neural Network-Based Interference Mitigation for MIMO-FBMC/OQAM Systems

2021 ◽  
Vol 2 ◽  
Author(s):  
Abla Bedoui ◽  
Mohamed Et-tolba
Keyword(s):  
Neural Network ◽  
Communication Systems ◽  
Deep Neural Network ◽  
Interference Mitigation ◽  
Multiple Input Multiple Output ◽  
Filter Bank Multicarrier ◽  
Multiple Input ◽  
High Spectral Efficiency ◽  
Input Multiple Output ◽  
Imaginary Field

Offset quadrature amplitude modulation-based filter bank multicarrier (FBMC/OQAM) is among the promising waveforms for future wireless communication systems. This is due to its flexible spectrum usage and high spectral efficiency compared with the conventional multicarrier schemes. However, with OQAM modulation, the FBMC/OQAM signals are not orthogonal in the imaginary field. This causes a significant intrinsic interference, which is an obstacle to apply multiple input multiple output (MIMO) technology with FBMC/OQAM. In this paper, we propose a deep neural network (DNN)-based approach to deal with the imaginary interference, and enable the application of MIMO technique with FBMC/OQAM. We show, by simulations, that the proposed approach provides good performance in terms of bit error rate (BER).

Sign in / Sign up

Export Citation Format

Share Document