scholarly journals Analysis of Rock Mass Rating Classification with Using RMR Method

2021 ◽  
Vol 6 (1) ◽  
pp. 133-136
Author(s):  
Sukardan Tawil ◽  
Muh. Imran Syam ◽  
Irianto Uno

The looseness that occurs on the road along Tawaeli-Toboli is a very important issue to be examined because the road is the most important axis road in Central Sulawesi - Indonesia. The goal to be achieved is to know the value of the quality of the rocks and their relation to the size of the slope angle on the road, especially at km 16 to km 26 from Palu City, using the Rock Mass Rating (RMR) method. From the analysis of RMR obtained one slope whose description of rocks is poor, namely on slope 3 with a value of RMR of 28 and a medium description with a value of 51 is on slope 1, for the other six slopes the description of the rock is still a good rock state with values ranging from 63-73. It is concluded that the lowest RMR value requires special attention to be on slope 3. Thus, the friction angle in small rocks, the value of RMR is also small, and the type of soil indicated is bad.

2020 ◽  
Vol 7 (1) ◽  
pp. 99
Author(s):  
Yong Adilah Shamsul Harumain ◽  
Nur Farhana Azmi ◽  
Suhaini Yusoff

Transit stations are generally well known as nodes of spaces where percentage of people walking are relatively high. The issue is do more planning is actually given to create walkability. Creating walking led transit stations involves planning of walking distance, providing facilities like pathways, toilets, seating and lighting. On the other hand, creating walking led transit station for women uncover a new epitome. Walking becomes one of the most important forms of mobility for women in developing countries nowadays. Encouraging women to use public transportation is not just about another effort to promote the use of public transportation but also another great endeavour to reduce numbers of traffic on the road. This also means, creating an effort to control accidents rate, reducing carbon emission, improving health and eventually, developing the quality of life. Hence, in this paper, we sought first to find out the factors that motivate women to walk at transit stations in Malaysia. A questionnaire survey with 562 female user of Light Railway Transit (LRT) was conducted at LRT stations along Kelana Jaya Line. Both built and non-built environment characteristics, particularly distance, safety and facilities were found as factors that are consistently associated with women walkability. With these findings, the paper highlights the criteria  which are needed to create and make betterment of transit stations not just for women but also for walkability in general.


Check List ◽  
2013 ◽  
Vol 9 (1) ◽  
pp. 42 ◽  
Author(s):  
Ana Lúcia Costa Prudente ◽  
Fernanda Magalhães ◽  
Alessandro Menks ◽  
João Fabrício De Melo Sarmento

We present the first lizard species list for the municipality of Juruti, state of Pará, Brazil. The list was drawn up as a result of data obtained from specimens deposited in the Herpetological Collection of the Museu Paraense Emílio Goeldi and from inventories conducted in 2008-2011. Sampling methods included pitfall traps with drift fences and time constrained searches. We considered the data collected by other researchers, incidental encounters and records of dead individuals on the road. We recorded 33 species, 26 genera and ten families. Norops tandai was the most abundant species. Compared with the other regions of Amazonia, the region of Juruti presented a large number of lizards. However, further studies with an increase in the sampling effort, could prove this area to be richer in lizards than that observed so far.


1897 ◽  
Vol 17 ◽  
pp. 319-320 ◽  
Author(s):  
Frank Calvert

I derive the materials of the present paper from some memoranda which I find amongst my archaeological notes and which relate to certain explorations to which I was not a party, made so long ago as 1887. I have thought that the particulars then obtained may be deemed sufficiently interesting to deserve a record in the history of Trojan archaeological discovery.The subject is one of the four small tumuli dotted about and near the hill of Balli-Dagh, the crest of which according to the now exploded theory of Le Chevalier (1785) was supposed to represent the Pergamos of Troy. In a memoir contributed to the Journal of the Archaeological Institute of 1864, I proved that the site in question was no other than that of the ancient city of Gergis. In the same paper I gave an account of the results of the excavation of one of the group of three tumuli on Balli-Dagh, the so-named Tomb of Priam. The other two, namely Le Chevalier's Tomb of Hector, and an unnamed hillock, were excavated respectively by Sir John Lubbock (about 1878) and Dr. Schliemann (1882) without result. The present relates to the fourth mound on the road between the villages of Bournarbashi and Arablar (as shown in the published maps), which goes by the name of Choban Tepeh (Shepherd's hillock) and the Tomb of Paris, according to Rancklin (1799).


2021 ◽  
pp. 48-53
Author(s):  
I. V. Zyryanov ◽  
A. N. Akishev ◽  
I. B. Bokiy ◽  
N. M. Sherstyuk

A specific feature of open pit mining of diamond deposits in Western Yakutia is the construction of the open pits in the zone of negative ambient temperatures, which includes thick permafrost rock mass, and which is at the same time complicated by the influence of cryogenic processes on deformation of pit wall benches. The paper presents the comparative analysis of strength characteristics in frozen and thawed rocks, stability of benches during mining, the general geomechanical approach to the determination of parameters of non-mining walls of the ultra-deep open pit diamond mines, and the parameters of nonmining walls and benches. Optimization of open pit wall configuration should primarily be based on the maximum utilization of the strength properties of frozen rocks in combination with the development of new approaches, calculation schemes and methods for assessing stability of open pit walls and benches of unconventional design, including the non-mining vertical benches. The main design characteristic that determines the parameters of open pit walls is the structural tectonic relaxation coefficient, which specifies the calculated value of cohesion in rock mass. For the diamond deposits, the values of the structural relaxation coefficient were obtained in a series of field tests and back calculations. Full-scale tests were carried out both during exploration operations in underground mines and in open pits. The accuracy of determining the values of the structural relaxation coefficient in the range of 0.085–0.11 is confirmed by the parameters of non-mining walls in an open pit mine 385–640 m deep, with overall slope angles of 38–55° and a steeper H 0.35–0.5 lower part having the slope angle of up to 70° with average strength characteristics of 7.85–11.84 MPa and the internal friction angle of 28.1–37.4°. Using the natural load-bearing capacity of rock mass to the full advantage, which the values of the structural relaxation coefficient of deposits show, allows optimization of open pit wall slope design and minimization of stripping operations.


1873 ◽  
Vol 6 (1) ◽  
pp. 142-164
Author(s):  
A. R. Fuller
Keyword(s):  
The Road ◽  
The Hill ◽  

On the 3rd of Ramazán, I left Ramlah, and went to a village called Khátún, and from thence to another, which they styled Kariatu-l-'Anab (Grape hamlet). On the road I observed plenty of wild rue growing spontaneously on hill and dale. I also noticed at this village a very delightful spring of water gushing out of a rock, where they had constructed reservoirs, and built edifices. From thence I proceeded up some rising ground, under the impression that I was ascending a hill, and that on going down the other side the city would lie before me. After I had climbed the ascent however for a short way, a vast wilderness lay in my front, partly stony, and partly showing merely the bare earth. At the summit of the hill stands the city of the “Baitu-l-Mukaddas” (Sacred Tabernacle, i.e. Jerusalem), between which and Tarábulis, whichis on the coast, are 56 parasangs, and from Balkh to Jerusalem 876.


Medical Care ◽  
2008 ◽  
Vol 46 (8) ◽  
pp. 759-761 ◽  
Author(s):  
Jeanne S. Mandelblatt ◽  
Arnold L. Potosky

Author(s):  
Palanisamy R ◽  
PLS Sai Kumar ◽  
Mekala Paavan Kiran ◽  
Ashutosh Mahto ◽  
Md. Irfan ◽  
...  

<p>Often modern cars have a collision avoidance system built into them known as Pre-Crash System, or Collision Mitigation System in order to reduce the collision. But majority of vehicles on the road, especially heavy motor vehicles lack in such a system. In this paper, the implementation of the Collision Avoidance System is to reduce the risks of collisions at the hairpin bend on a Hilly track, Ghats, or other Zero visibility turns. The proposed system contains a set of IR sensors, LEDs, etc. It uses four IR sensors, which are placed on either side of the hairpin bend. The sensors are mutually exclusive and are connected to LEDs through wires. Based on the output of sensors, the LEDs will glow and start alerting the other vehicle approaching from the other end, Hence the drivers will decrease their speeds which would help in preventing collision. The LEDs will help the drivers in detecting the position of  the vehicles on either side of the bend. During climatic conditions like fog, snow, etc, the visibility of the drivers would decrease due to which they will not be able to see the LEDs, Hence, a collision may take place. To bring help as soon as possible to the injured, we have also made a proposed system which would alert the nearby hospitals that an accident has taken place. We have used Arduino UNO, GSM sim module and these will be kept inside a black box which will be inside the, car safe from breakage during the accident.<strong></strong></p>


2021 ◽  
Vol 297 ◽  
pp. 01019
Author(s):  
Abdeslam Houari ◽  
Tomader Mazri

6G of mobile networks plays a crucial role in improving the capacity and enhancing the quality of services of Vehicle-to-Everything (V2X) based networks evolving in an intelligent environment. VANET is a promising project in the intelligent transportation field using V2X communications. The emergence of several 5G and 6G technologies has raised several challenges for scientists and researchers to allow vehicles and road users to enjoy several services while ensuring their safety on the road. Among these technologies, the unmanned aerial vehicle (UAV), which can perform different tasks for road users and vehicle drivers such as data caching, packet relaying and processing. In this article, we present a new approach based on 6G Unmanned Aerial Vehicles (UAV) technology on a vehicular cloud architecture while exploiting the exchange support of information-centric networking (ICN) for the improvement of network capacity.


2011 ◽  
Vol 105-107 ◽  
pp. 267-270 ◽  
Author(s):  
Sung Wook Hwang ◽  
Jin Hyuk Han ◽  
Ki Duck Sung ◽  
Sang Kwon Lee

Tire noise is classified by pattern noise and road noise in a vehicle. Especially pattern noise has impulsive characteristics since it is generated by impacting of tire’s block on the road. Therefore, a special signal process is needed other than traditional Fourier Transform, because the characteristic of signal is varying with time. On the other hand, the pattern noise is a kind of non-stationary signal and is related to the impulsive train of pitch sequence of a block. In this paper, Wavelet Transform is applied to verify the impulse signal caused by impact of block and groove and to verify the relationship between the pattern noise and the train of pitch sequence.


Sign in / Sign up

Export Citation Format

Share Document