Study Enhancing the Rutting of Flexible Pavement by Adding Selected Polymers into Asphalt Mixes

2021 ◽  
Author(s):  
Mohammed Al-Jumaili ◽  
Keyword(s):  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Flexible Pavement ◽  
Asphalt Mixes ◽  
The Road ◽  
Binder Layer ◽  
Heavy Trucks ◽  
Suitable Treatment ◽  
Road Performance ◽  
On The Road

Rutting in flexible pavement is one of the main permanent deformation which appears in most Iraqi roads owing to high temperature and the increase in axial excessive heavy trucks load, these combined conditions cause a major impact on the road performance. The polymers used as additives to improve the properties of asphalt and, that leads to achieve high quality asphalt mixture. This humble research focused on finding the suitable treatment for such issue by using SBS and HDPE. Whereas 5 percent for each polymer was used (2%, 4%, 6%, 8% and 10%) by weight of total mix. A different percentage of polymers were used in order to achieve the best additive percent which was proved to be (8% HDPE, 6% SBS) for wearing (III A) layer and (6% HDPE, 2% SBS) for binder layer. As well as the results showed that using the optimum percent of additives for each layer of asphaltic mixture and test it as one specimen formed from two layers, has decreased the rutting percent by (72%, 65%) for (HDPE, SBS) respectively for each type of additives at (40ºC).

Research on the Road Performance of the AC-25 Asphalt Mixtures

2012 ◽  
Vol 204-208 ◽  
pp. 1593-1598
Author(s):  
Hong Mei Li ◽  
Wen Fang Liu
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Central Layer ◽  
The Road ◽  
Road Performance ◽  
On The Road

In this paper, firstly, based on asphalt pavement central layer, the comparison with the foreign related gradation of asphalt mixtures, one typical kinds of gradations are decided; Secondly, the asphalt aggregate ratio is predicted based on professor Lin’s Theory , and five asphalt aggregate ratio are selected. Finally, the road performance of asphalt mixture is experimented, and the road performance of five asphalt aggregate ratio is analyzed. As a result, we can predict the range of the optimum asphalt aggregate ratio based on the road performance.

scholarly journals SERAT ECENG GONDOK SEBAGAI BAHAN ALTERNATIF ADMIXTURE PADA LASTON TIPE XI SNI 03-1737-1989 DITINJAU TERHADAP NILAI-NILAI UJI MARSHALL

Jurnal CIVILA ◽  
2018 ◽  
Vol 3 (2) ◽  
pp. 154
Author(s):  
Errine Yulia Rizqi Intanti ◽  
Zulkifli Lubis
Keyword(s):  
Water Hyacinth ◽  
Asphalt Mixture ◽  
Road Construction ◽  
Flexible Pavement ◽  
The Road ◽  
Concrete Layer ◽  
Wide Range ◽  
On The Road ◽  
Marshall Stability

In Indonesia, the road construction has experienced a fairly good development. From a wide range of road constructions, flexible pavement is the most chosen one because its characteristics: easy, fast, and efficient. However, flexible pavement has many weaknesses, for example the premature damage on the road surface after some time passed by the traffic so that the road cannot reach the planned age. For that, it is done a research to add a hot asphalt mixture material that aims to improve the quality of the mixture results. The selected ingredient is natural water hyacinth. The method used is trial and error with reference of SNI 03-1737-1989. Variations used are 2%, 4%, 6%, 8% and 10% of the asphalt weight, asphalt level used is 5.72 %. Of the 5 variations of mixture used on Type XI Asphalt Concrete Layer, it is obtained the result that the water hyacinth fiber level which has the best score and meet the specifications of SNI 03-1737-1989 is on the percentage of 6% which obtained from calculation data using graphs and regression model where Marshall Stability is equal to 644,46 Kg, flow 3,39 mm, VMA (voids in the mineral aggregate) is equal to 13,83 %, VFWA (voids filled with asphalt) is equal to 65,35%, VIM (voids in the mix) is equal to 2,52 %, density of 2.31 gr/cc, and Marshall Quotient of 164.03 Kg / mm.

scholarly journals Study on the Road Performance of Foamed Warm-Mixed Reclaimed Semi-Flexible Asphalt Pavement Material

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5379
Author(s):  
Jiawen Xie ◽  
Wenke Huang ◽  
Bei Hu ◽  
Zhicheng Xiao ◽  
Hafiz Muhammad Zahid Hassan ◽  
...  
Keyword(s):  
Asphalt Pavement ◽  
Flexible Pavement ◽  
Fatigue Performance ◽  
High Temperature Stability ◽  
Reclaimed Asphalt ◽  
The Road ◽  
Flexible Material ◽  
Road Performance ◽  
On The Road ◽  
Pavement Material

Warm-mixed reclaimed asphalt pavement (RAP) technology has been widely studied worldwide as a recycled environmental method to reuse waste materials. However, the aggregate skeleton structure of the warm-mixed reclaimed asphalt mixture is not stable because of the existence of the recycled materials. Warm-mixed recycled semi-flexible pavement material can solve the defects of the above materials. In this study, five different types of open-graded asphalt mixtures containing different contents of RAP were designed, and relevant laboratory tests were conducted to assess the road performance of the warm-mixed recycled semi-flexible pavement material. The test results indicated that the road performance of warm-mixed reclaimed semi-flexible pavement materials has good resistance to rut deformation ability. Furthermore, the materials also had good water stability and fatigue performance. The grey correlation analysis shows that the asphalt binder content has the most significant correlation with the high-temperature stability, and the correlation between RAP content and the fatigue performance was the greatest. Furthermore, the curing age has the most remarkable with the low-temperature crack resistance of the warm-mixed reclaimed semi-flexible material.

scholarly journals Study on the effect of Acid Rain erosion on the Road performance of Steel Slag Asphalt mixture

2021 ◽  
Vol 1972 (1) ◽  
pp. 012108
Author(s):  
Yi Luo Zhang ◽  
Zhao Wang ◽  
Guo Pu Liu ◽  
Yuan De Kou
Keyword(s):  
Acid Rain ◽  
Steel Slag ◽  
Asphalt Mixture ◽  
The Road ◽  
Road Performance ◽  
On The Road ◽  
Rain Erosion

Experimental Study on Mix Ratio Design and Road Performance of Medium and Small Deformation Seamless Expansion Joints of Bridges

2021 ◽  
pp. 036119812098474
Author(s):  
Pengzhen Lu ◽  
Chenhao Zhou ◽  
Simin Huang ◽  
Yang Shen ◽  
Yilong Pan
Keyword(s):  
Traffic Safety ◽  
Performance Test ◽  
Asphalt Mixture ◽  
Small Deformation ◽  
Expansion Joint ◽  
Expansion Joints ◽  
Mixture Ratio ◽  
The Road ◽  
Marshall Test ◽  
Road Performance

Expansion joints are a weak and fragile part of bridge superstructure. The damage or failure of the expansion joint will lead to the decline of bridge durability and endanger the bridge structure and traffic safety. To improve the service life and performance of bridge expansion joints, the ideal method is to use seamless expansion joints. In this study, starting from the commonly used asphalt mixture gradation of seamless expansion joint, and taking into account the actual situation of bridge expansion joint structure and environment in China, the gradation and asphalt-aggregate ratio are preliminarily designed. Through a Marshall test, the corresponding asphalt mixture is evaluated and analyzed according to the stability, flow value, and void ratio, and the optimal gradation and asphalt-aggregate ratio are determined. Finally, the asphalt mixture is prepared with the mixture ratio design, and the test results of an immersion Marshall test, fatigue performance test, and full-scale test verify that the asphalt mixture meets the road performance requirements of seamless expansion joints. On the basis of the experimental data, the performance of large sample asphalt mixture is continuously tested, compared, and optimized. The results show that the asphalt mixture ratio designed is true and reliable, which can provide reference for the optimal design of seamless expansion joint filler.

scholarly journals Study of High-Temperature Properties of Asphalt Mixtures Used for Bridge Pavement with Concrete Deck

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4238
Author(s):  
Piotr Pokorski ◽  
Piotr Radziszewski ◽  
Michał Sarnowski
Keyword(s):  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Binder Content ◽  
Void Content ◽  
Concrete Bridge ◽  
Asphalt Mixes ◽  
Protective Layers ◽  
Concrete Bridge Decks ◽  
Air Void ◽  
Air Void Content

The paper presents the issue of resistance to permanent deformations of bridge pavements placed upon concrete bridge decks. In Europe, bridge asphalt pavement usually consists of a wearing course and a protective layer, which are placed over the insulation (waterproofing). Protective layers of bridge pavement are commonly constructed using low air void content asphalt mixes as this provides the suitable tightness of such layers. Due to increased binder content, asphalt mixes for bridge pavement may have reduced resistance to permanent deformations. The article presents test results of resistance to permanent deformations of asphalt mixes for the protective layers. In order to determine the composition of mixtures with low air void content and resistance to permanent deformation, an experimental design was applied using a new concept of asphalt mix composition. Twenty-seven different asphalt mixture compositions were analyzed. The mixtures varied in terms of binder content, sand content and grit ratio. Resistance to permanent deformation was tested using the laboratory uniaxial cyclic compression method (dynamic load creep). On the basis of experimental results and statistical analysis, the functions of asphalt mixture permanent deformation resistance were established. This enabled a determination of suitable mixture compositions for protective layers for concrete bridge decks.

scholarly journals ALTERNATIF PENGGUNAAN SERAT ECENG GONDOK UNTUK MENINGKATKAN INDEX PROPERTIES OF MARSHALL PADA CAMPURAN LASTON TIPE I SNI 03-1737-1989

UKaRsT ◽  
2018 ◽  
Vol 2 (1) ◽  
pp. 1
Author(s):  
Dwi Kartikasari ◽  
Samsul Arif
Keyword(s):  
Water Hyacinth ◽  
Asphalt Mixture ◽  
Flexible Pavement ◽  
Type I ◽  
The Road ◽  
Concrete Layer ◽  
Marshall Test ◽  
Marshall Stability ◽  
Water Hyacinth Fiber

However, flexible pavement has many disadvantages, such as early damage to the road surface after some time has passed by traffic so the road cannot reach the planned age. For this reason, a research was carried out to add hot asphalt mixture which aims to improve the quality of the mixture, the selected material is natural water hyacinth. The method used is trial and error with reference SNI 031737-1989. Variations used were 3%, 5%, and 7% of asphalt weight, the level of asphalt used was 4.48%. Of the 3 variations of the mixture used in Type I Asphalt Concrete Layer, the results obtained that the water hyacinth fiber content that has the best score and meet the specifications of SNI 03-1737- 1989 is the percentage of 7% obtained. from the calculation data using graphs and regression models where Marshall Stability is 889.73 Kg, VFWA (voids filled with asphalt) are equal to 65.97%, VIM (voids in mixtures) are equal to 1.757%, VMA (voids in mineral aggregates ) is equal to 20.30%, density 2.420 gr / cc, Flow 3.37 mm, and Marshall Quotient of 265.80 Kg / mm.Keywords : flexible pavement, water hyacinth fiber, Marshall test.

Sign in / Sign up

Export Citation Format

Share Document