scholarly journals The effect of the leakage of the engine arrest engine and emissions of harmful substances

2018 ◽  
Vol 19 (6) ◽  
pp. 502-505
Author(s):  
Szymon Kołodziej
Keyword(s):  
Full Range ◽  
Filling Ratio ◽  
Intake Manifold ◽  
Exhaust Gas ◽  
Vehicular Traffic ◽  
Gas Composition ◽  
Air Leakage ◽  
Si Engine ◽  
Harmful Substances ◽  
Emissions Of Harmful Substances

In this article, the issues related to vehicular traffic in big cities and heightened harmful substance emissions stemming from it were described. In the research part, the effect of air leakage in the SI engine intake manifold on substance emissions was investigated. The manifold was customized to simulate air leakage in each of its air ducts. Same ratio of leakage was assumed for each duct, and substance emissions were measured in full range of engine rotational speeds. A difference in exhaust gas composition was shown for each researched variant, being the result of varying cylinder filling ratio due to simulated air leakage.

scholarly journals Ensuring Requirements for Emissions of Harmful Substances of Diesel Engines

2020 ◽  
Vol 19 (4) ◽  
pp. 305-310
Author(s):  
G. M. Kuharonak ◽  
D. V. Kapskiy ◽  
V. I. Berezun
Keyword(s):  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Fuel Consumption ◽  
Exhaust Gas Recirculation ◽  
Exhaust Gas ◽  
Average Temperature ◽  
Dispersed Particles ◽  
Harmful Substances ◽  
Gas Recirculation ◽  
Emissions Of Harmful Substances

The purpose of this work is to consider the requirements for emissions of harmful substances of diesel engines by selecting design and adjustment parameters that determine the organization of the workflow, and the exhaust gas cleaning system, taking into account the reduction of fuel consumption. Design elements and geometric characteristics of structures for a turbocharged diesel engine of Д-245 series produced by JSC HMC Minsk Motor Plant (4ЧН11/12.5) with a capacity of 90 kW equipped with an electronically controlled battery fuel injection have been developed: exhaust gas recirculation along the high pressure circuit, shape and dimensions of the combustion chamber, the number and angular arrangement of the nozzle openings in a nozzle atomizer, and inlet channels of the cylinder head. Methods for organizing a workflow are proposed that take into account the shape of the indicator diagrams and affect the emissions of nitrogen oxides and dispersed particles differently. Their implementation allows us to determine the boundary ranges of changes in the control parameters of the fuel supply and exhaust gas recirculation systems when determining the area of minimizing the specific effective fuel consumption and the range of studies for the environmental performance of a diesel engine. The paper presents results of the study on the ways to meet  the requirements for emissions of harmful substances, obtained by considering options for the organization of working processes, taking into account the reduction in specific effective fuel consumption, changes in the average temperature of the exhaust gases and diesel equipment. To evaluate these methods, the following indicators have been identified: changes in specific fuel consumption and average temperature of the toxicity cycle relative to the base cycle, the necessary degree of conversion of the purification system for dispersed particles and NOx. Recommendations are given on choosing a diesel engine to meet Stage 4 emission standards for nitrogen oxides and dispersed particles.

scholarly journals ЗМЕНШЕННЯ ВИКИДІВ СУДНОВОГО ДИЗЕЛЯ УТИЛІЗАЦІЄЮ ТЕПЛОТИ РЕЦИРКУЛЯЦІЙНИХ ГАЗІВ ЕЖЕКТОРНОЮ ХОЛОДИЛЬНОЮ МАШИНОЮ

2019 ◽  
pp. 20-24
Author(s):  
Максим Андрійович Пирисунько ◽  
Роман Миколайович Радченко ◽  
Андрій Адольфович Андреєв ◽  
Вікторія Сергіївна Корнієнко
Keyword(s):  
Nitrogen Oxides ◽  
Alternative Fuels ◽  
Exhaust Gas ◽  
Exhaust Gases ◽  
Harmful Emissions ◽  
Harmful Substances ◽  
Main Engine ◽  
Gas Recirculation ◽  
Refrigeration Machine ◽  
Emissions Of Harmful Substances

The problem of air basin pollution of the World Ocean with harmful emissions from the exhaust gases of marine diesel engines is primarily associated with the creation of highly efficient technologies for the neutralization of nitrogen oxides NOx on exhaust gases from a diesel engine. Emissions of harmful substances from the combustion of marine fuels are limited by international atmospheric protection programs and the requirements of the International Maritime Organization (IMO). The requirements relate to almost all groups of harmful emissions in marine engines and the more stringent of them are primarily related to nitrogen oxides NOx and sulfur oxides SOx. To reduce harmful emissions from exhaust gases into the environment, scientists and world engine leaders use and suggest various methods for reducing the content of harmful substances in exhaust gases. The implementation of new standards in the areas of further improvement of the working process, the use of alternative fuels, fuel, and air additives, as well as selective catalytic reduction systems do not preclude further development of scientific research in the field of exhaust gas cleaning. One of the promising ways in environmentalizing marine internal combustion engines is the neutralization of harmful substances in exhaust gases through particular gas recirculation (EGR-technology). However, the use of such techniques conflicts with the engine's energy efficiency. In the work presented, the scheme-design solution of the exhaust gas recirculation system with using the heat of recirculation gases by an ejector refrigeration machine for cooling the air at the intake of ship's main engine is proposed. The effect of using the heat of recirculation gases for cooling the air at the intake of the engine is analyzed taking into account the changing climatic conditions for a particular vessel's route line. It is shown that the use of an ejector refrigeration machine reduces the air temperature at the entrance of the main engine by 5…15 ° С, which reduces the specific fuel consumption. This reduces emissions of harmful substances when the engine is running with recirculation of gases.

Improving the Environmental Safety of Transport Engines Using Modified Engine Oil

2020 ◽  
Vol 24 (1) ◽  
pp. 9-13
Author(s):  
S.A. Petukhov ◽  
L.S. Kurmanova ◽  
M.P. Erzamaev ◽  
D.S. Sazonov ◽  
D.S. Chinchenko
Keyword(s):  
Experimental Studies ◽  
Environmental Safety ◽  
Engine Oil ◽  
Exhaust Gas ◽  
Motor Oil ◽  
Harmful Emissions ◽  
Harmful Substances ◽  
Technical Solutions ◽  
Emissions Of Harmful Substances

The problems of reducing emissions of harmful substances by transport engines are considered. It has been established that the use of modified engine oil is an effective way to increase the environmental safety of transport engines. The effectiveness of additives to improve the backsize of motor oil and reduce harmful emissions in the exhaust gas was evaluated. Methods for feeding additives are proposed. Technical solutions for the use of additives for transport engines have been developed. Experimental studies are presented to assess the effect of modified engine oil on the environmental safety of an engine.

scholarly journals EFFECT OF ALCOHOL ADDITIVE TO GASOLINE ON EMISSIONS OF POLLUTANTS WITH THE EXHAUST GAS OF SPARK IGNITION ENGINE

2021 ◽  
Vol 1 (50) ◽  
pp. 57-66
Author(s):  
Dobrovolsky O ◽  
◽  
Tsiuman M ◽  
Stupak N ◽  
Sosida S ◽  
...  
Keyword(s):  
Environmental Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Motor Vehicles ◽  
Exhaust Gas ◽  
Alcohol Content ◽  
Fuel Blends ◽  
Blended Fuel ◽  
Harmful Substances ◽  
Emissions Of Harmful Substances

The constant increasing the number of motor vehicles leads to increase the fuel consumption. Because of oil reserves are exhaustive, the problem of replacing the petroleum fuel with alternative ones is actual. One of which is alcohol fuel. At present, the shortage of motor fuels for internal combustion engines requires their improvment in order to reduce fuel consumption and use the alcohol and various its blends with conventional petroleum-based fuels. The pollutant emissions from motor vehicles are more than a third part of the total emissions to atmosphere and more than 90% of all mobile sources. In addition, motor vehicles are the main source of environmental pollution precisely in places with high concentration of people. It enhances significantly the negative impact of motor transport. In the article it is considered the impact of alcohol additive in standard gasoline on the mass emissions of harmful substances by modern petrol engine equipped with fuel injection system with feedback. The study of using the alcohol and gasoline fuel blends with different content of the alcohol in range from 0 to 36% has been fulfilled. Dependence of load influence on the mass emissions of pollutants is found. Oxygen concentration in fuel are increased when using the alcohols. It contributes to more complete combustion of the fuel and reduction the mass emissions of hydrocarbons, carbon monoxide and carbon dioxide. The disadvantages of the alcohol and gasoline fuel blends include less net calorific value than for conventional gasoline and increased emissions of nitrogen oxides due to free oxygen presence. The mass emissions of harmful substances equivalent to carbon monoxide G∑CO have been slightly increased when using the alcohol and gasoline fuel blends. It is explained by increasing the nitrogen oxides emissions. Objective: To determine the effect of alcohol content in blended fuel for mass emissions of pollutants. Object: environmental performance of spark ignition engine powered by the alcohol and gasoline fuel blends. Subject: determination of expedient alcohol content in the fuel to improve environmental performance of spark ignition engine. The conclusions have been made and the obtained results have been analyzed for further experimental and theoretical studies. KEYWORDS: GASOLINE, ALCOHOL, BLENDED FUEL, EXHAUST GAS, POLLUTANTS, MASS EMISSIONS.

A Control-Oriented Polytropic Model of SI Engine Intake Manifold

2003 ◽  
Author(s):  
Josˇko Deur ◽  
Davor Hrovat ◽  
Josˇko Petric´ ◽  
Zˇeljko Sˇitum
Keyword(s):  
Heat Transfer ◽  
Intake Manifold ◽  
Simple Extension ◽  
Si Engine ◽  
Polytropic Model ◽  
Back Flow ◽  
Thermal Transients ◽  
Three State Model ◽  
Transfer Properties ◽  
Variant Structure

The paper presents experimental results which show significant changes of the intake manifold air temperature during fast tip-in/tip-out engine transients. An adequate two-state polytropic manifold model is developed and experimentally validated. An emphasis is on the derivation and parameterization of a time-variant structure of the heat transfer coefficient. The polytropic manifold model is extended to a three-state form for the more general case of different heat transfer properties for the manifold plenum and runners. An influence of the engine back flow on the runner thermal transients is observed. A simple extension of the three-state model with the back flow effect is proposed.

A New Calculation Approach to the Energy Balance of a Gas Turbine Including a Study of the Impact of the Uncertainty of Measured Parameters

2005 ◽  
Author(s):  
Helmer G. Andersen ◽  
Pen-Chung Chen
Keyword(s):  
Energy Balance ◽  
Gas Turbine ◽  
Control Volume ◽  
Ambient Air ◽  
Energy Balance Equation ◽  
Inlet Temperature ◽  
Exhaust Gas ◽  
Gas Composition ◽  
Intake Flow ◽  
The Impact

Computing the solution to the energy balance around a gas turbine in order to calculate the intake mass flow and the turbine inlet temperature requires several iterations. This makes hand calculations very difficult and, depending on the software used, even causes significant calculation times on PCs. While this may not seem all that important considering the power of today’s personal computers, the approach described in this paper presents a new way of looking at the gas turbine process and the resulting simplifications in the calculations. This paper offers a new approach to compute the energy balance around a gas turbine. The energy balance requires that all energy flows going into and out of the control volume be accounted for. The difficulty of the energy balance equation around a gas turbine lies in the fact that the exhaust gas composition is unknown as long as the intake flow is unknown. Thus, a composition needs to be assumed when computing the exhaust gas enthalpy. This allows the calculation of the intake flow, which in turn provides a new exhaust gas composition, and so forth. By viewing the exhaust gas as a flow consisting of ambient air and combusted fuel, the described iteration can be avoided. The study presents the formulation of the energy balance applying this approach and looks at the accuracy of the result as a function of the inaccuracy of the input parameters. Furthermore, solutions of the energy balance are presented for various process scenarios, and the impact of the uncertainty of key process parameter is analyzed.

Analysis of Variable Intake Runner Lengths and Intake Valve Open Timings on Engine Performances

2014 ◽  
Vol 663 ◽  
pp. 336-341 ◽  
Author(s):  
Mohd Farid Muhamad Said ◽  
Zulkarnain Abdul Latiff ◽  
Aminuddin Saat ◽  
Mazlan Said ◽  
Shaiful Fadzil Zainal Abidin
Keyword(s):  
Engine Performance ◽  
Intake Manifold ◽  
Intake Valve ◽  
Si Engine ◽  
Engine Simulation ◽  
Engine Model ◽  
Optimum Parameters ◽  
Comparison Results ◽  
Variable Valve ◽  
Engine Development

In this paper, engine simulation tool is used to investigate the effect of variable intake manifold and variable valve timing technologies on the engine performance at full load engine conditions. Here, an engine model of 1.6 litre four cylinders, four stroke spark ignition (SI) engine is constructed using GT-Power software to represent the real engine conditions. This constructed model is then correlated to the experimental data to make sure the accuracy of this model. The comparison results of volumetric efficiency (VE), intake manifold air pressure (MAP), exhaust manifold back pressure (BckPress) and brake specific fuel consumption (BSFC) show very well agreement with the differences of less than 4%. Then this correlated model is used to predict the engine performance at various intake runner lengths (IRL) and various intake valve open (IVO) timings. Design of experiment and optimisation tool are applied to obtain optimum parameters. Here, several configurations of IRL and IVO timing are proposed to give several options during the engine development work. A significant improvement is found at configuration of variable IVO timing and variable IRL compared to fixed IVO timing and fixed IRL.

Sign in / Sign up

Export Citation Format

Share Document