Analysis of the Social and Environmental Impact of Biodiesel Fuel Refined from Used Cooking Oil in Ibaraki Prefecture

2010 ◽  
Vol 40 (3) ◽  
pp. 749-762
Author(s):  
Hirokazu GOTO ◽  
Yuichi HATAYA ◽  
Yasuyuki YOKOTA ◽  
Takeshi MIZUNOYA ◽  
Yoshiro HIGANO
Author(s):  
M. S. Dulawat ◽  
J. M. Makavana ◽  
S. V. Kelaiya ◽  
M. J. Gojiya ◽  
G. A. Gadhiya ◽  
...  

The increasing awareness of the depletion of fossil fuel resources and the environmental benefits of biodiesel fuel has made it more attractive in recent times. Its primary advantages deal with it being one of the most renewable fuels currently available and it is also non-toxic and biodegradable. It can also be used directly in most diesel engines without requiring extensive engine modifications. However, the cost of biodiesel is the major hurdle to its commercialization in comparison to petroleum-based diesel fuel. Biodiesel is proved to be a potential candidate for partial substitute of mineral diesel oil. The environmental issues associated with the use of fossil-based energy sources have informed the search for more sustainable energy alternatives. This work investigated the potential of producing biodiesel from waste cooking oil (WCO). The work gives ample evidence that oil from eateries in WCO could be used in producing high quality biodiesel in an easy, one-step transesterification reaction without the need for acid esterification which increases the overall cost of the production process.


2021 ◽  
Vol 8 (1) ◽  
pp. 051-060
Author(s):  
Sutrisno ◽  
Avando Bastari ◽  
Okol Sri Suharyo

The Ship uses the MTU 16V956 TB 92 propulsion engine with a piston-type Mexican Hat combustion chamber. In general, the crown is used on machines with large torque. Besides that, the crown shape in the combustion chamber is also very influential on the formation of a mixture of fuel and air before the combustion process occurs. So it is necessary to know about the spray pattern of biodiesel fuel of enviromental things (castor, coconut, used cooking oil/MGB) in the Mexican Hat combustion chamber. In this study, using the Mexican Hat-shaped piston crown simulation method, the first step was to test the spray pattern of the three types of biodiesel (castor, coconut, used cooking oil) by simulating a tube with an injection pressure of 350 bar gauge pressure inside a barometric pressure tube. While the completion in the Mexican Hat combustion chamber with a chamber pressure of 35 bar gauge and injection pressure of 350 bar gauge was completed with the CFD program, Fluent 6.2, and the results of the three biodiesels were compared. From the CFD simulation results obtained spray patterns of the three types of biodiesel (castor, coconut, used cooking oil). At the same injection pressure and chamber pressure, used cooking biodiesel has the longest penetration length, followed by castor biodiesel and coconut biodiesel. The spray angle of coconut biodiesel is the largest, followed by castor biodiesel and used cooking oil biodiesel. SMD coconut biodiesel is the smallest, followed by castor biodiesel and used cooking oil biodiesel.


2008 ◽  
Vol 4 (4) ◽  
pp. 318-323 ◽  
Author(s):  
Hirotsugu KAMAHARA ◽  
Shun YAMAGUCHI ◽  
Ryuichi TACHIBANA ◽  
Naohiro GOTO ◽  
Koichi FUJIE

2021 ◽  
Vol 170 ◽  
pp. 302-314
Author(s):  
Adeyinka S. Yusuff ◽  
Aman K. Bhonsle ◽  
Jayati Trivedi ◽  
Dinesh P. Bangwal ◽  
Lok P. Singh ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3703
Author(s):  
Ming-Chien Hsiao ◽  
Wei-Ting Lin ◽  
Wei-Cheng Chiu ◽  
Shuhn-Shyurng Hou

In this study, ultrasound was used to accelerate two-stage (esterification–transesterification) catalytic synthesis of biodiesel from used cooking oil, which originally had a high acid value (4.35 mg KOH/g). In the first stage, acid-catalyzed esterification reaction conditions were developed with a 9:1 methanol/oil molar ratio, sulfuric acid dosage at 2 wt %, and a reaction temperature of 60 °C. Under ultrasound irradiation for 40 min, the acid value was effectively decreased from 4.35 to 1.67 mg KOH/g, which was decreased to a sufficient level (<2 mg KOH/g) to avoid the saponification problem for the subsequent transesterification reaction. In the following stage, base-catalyzed transesterification reactions were carried out with a 12:1 methanol/oil molar ratio, a sodium hydroxide dosage of 1 wt %, and a reaction temperature of 65 °C. Under ultrasound-assisted transesterification for 40 min, the conversion rate of biodiesel reached 97.05%, which met the requirement of EN 14214 standard, i.e., 96.5% minimum. In order to evaluate and explore the improvement of the ultrasound-assisted two-stage (esterification–transesterification) process in shortening the reaction time, additional two-stage biodiesel synthesis experiments using the traditional mechanical stirring method under the optimal conditions were further carried out in this study. It was found that, under the same optimal conditions, using the ultrasound-assisted two-stage process, the total reaction time was significantly reduced to only 80 min, which was much shorter than the total time required by the conventional method of 140 min. It is worth noting that compared with the traditional method without ultrasound, the intensification of the ultrasound-assisted two-stage process significantly shortened the total time from 140 min to 80 min, which is a reduction of 42.9%. It was concluded that the ultrasound-assisted two-stage (esterification–transesterification) catalytic process is an effective and time-saving method for synthesizing biodiesel from used cooking oil with a high acid value.


2014 ◽  
Vol 660 ◽  
pp. 386-390 ◽  
Author(s):  
Norazwan Azman ◽  
Mirnah Suardi ◽  
Amir Khalid

The use of fossil fuels as energy sources has grown to significantly be likely to have a major environmental impact. Reduction of world oil reserves and increasing environmental concerns have prompted alternative is found and renewable source of energy called biodiesel. Biodiesel fuel from vegetable oil is considered as the best candidates for diesel fuel replacement in diesel engines because of its closer. Fuel prices are going up day by day in the world. Thus, the means and methods have been trying for years to get fuel alternative outcomes. This study investigated the effects of different storage periods used in quality biodiesel blends (B5, B10, B15) of waste cooking oil and diesel fuel under low temperature and the temperature of the environment. Biodiesel samples were stored in glass containers under indoor conditions, and outdoor conditions for 10 weeks in total. These samples were monitored on a weekly basis through the test properties. The experimental density, viscosity, acid value, water content and flash point discussed in detail. Biodiesel storage at low temperatures is suitable and more advantageous because the impact on the physical properties is minimal and beneficial to slow down the degradation of biodiesel and storage.


2014 ◽  
Vol 34 (8) ◽  
pp. 1537-1545 ◽  
Author(s):  
J. Fierro ◽  
E.J. Martínez ◽  
A. Morán ◽  
X. Gómez

Sign in / Sign up

Export Citation Format

Share Document