Energy Analysis of Impact-Shear Interaction of Counter Flows of Ground Loose Material in Centrifugal Disintegrator

Mining Revue ◽  
2021 ◽  
Vol 27 (3) ◽  
pp. 30-39
Author(s):  
Volodymyr Nadutyi ◽  
Oleksandr Tytov ◽  
Dmytrii Kolosov ◽  
Vitalii Sukhariev ◽  
Taras Usatyi

Abstract The distribution of power consumption of centrifugal two-shaft disintegrator for impact and shear destruction of material as functions of its technological and structural parameters, as well as parameters of material being ground, has been substantiated. An analytical apparatus has been developed to determine the degree of influence of each factor. Factors affecting the absolute value of the consumed power of the disintegrator have also been established. The results of the work make it possible to optimize the technological process in order to reduce the yield of bream fragments of destruction, which is observed when the share of energy of shear deformations increases, in order to obtain cuboid fractions of disintegration products. They allow to create a methodology for determining the rational parameters of a centrifugal double-shaft disintegrator.

2020 ◽  
pp. 107-111
Author(s):  
В.И. Гнатюк ◽  
О.Р. Кивчун ◽  
Д.Г. Морозов

Авторами предлагается алгоритм прогнозирования электропотребления объектов социально-экономических систем на основе значений ранговых норм. В его основу положено понятие ранговой нормы, представляющей собой неотрицательный функционал, заданный в векторном ранговом пространстве и обобщающий понятие длины вектора или абсолютного значения параметра. Основными этапами алгоритма являются: импорт данных по электропотреблению, расчёт ранговых норм, прогнозирование значений ранговых норм и исходных значений электропотребления, восстановление прогнозных значений ранговых норм, сравнение результатов прогнозирования и выбор наилучшего прогноза. Эксперементальная проверка алгоритма была реализована на данных по электропотреблению регионов Российской Федерации. Анализ результатов прогнозов позволил определить, что средние относительные и абсолютные ошибки метода прогнозирования на основе значений ранговых норм, меньше. Данный факт позволяет сделать вывод о том, что для среднесрочного прогнозирования целесообразнее использовать метод на основе значений ранговых норм. The authors propose an algorithm for predicting the power consumption of objects of socio-economic systems based on the values of rank norms. It is based on the concept of a rank norm, which is a non-negative functional specified in a vector rank space and generalizing the concept of the length of a vector or the absolute value of a parameter. The main stages of the algorithm are: importing data on power consumption, calculating rank norms, predicting the values of rank norms and initial values of power consumption, restoring the predicted values of rank norms, comparing forecast results and choosing the best forecast. Experimental verification of the algorithm was carried out on data on power consumption of the regions of the Russian Federation. Analysis of the forecast results allowed us to determine that the average relative and absolute errors of the forecasting method based on the values of rank norms are less. This fact allows us to conclude that it is more expedient to use the method based on the values of rank norms for medium-term forecasting.


2020 ◽  
Vol 64 (1-4) ◽  
pp. 165-172
Author(s):  
Dongge Deng ◽  
Mingzhi Zhu ◽  
Qiang Shu ◽  
Baoxu Wang ◽  
Fei Yang

It is necessary to develop a high homogeneous, low power consumption, high frequency and small-size shim coil for high precision and low-cost atomic spin gyroscope (ASG). To provide the shim coil, a multi-objective optimization design method is proposed. All structural parameters including the wire diameter are optimized. In addition to the homogeneity, the size of optimized coil, especially the axial position and winding number, is restricted to develop the small-size shim coil with low power consumption. The 0-1 linear programming is adopted in the optimal model to conveniently describe winding distributions. The branch and bound algorithm is used to solve this model. Theoretical optimization results show that the homogeneity of the optimized shim coil is several orders of magnitudes better than the same-size solenoid. A simulation experiment is also conducted. Experimental results show that optimization results are verified, and power consumption of the optimized coil is about half of the solenoid when providing the same uniform magnetic field. This indicates that the proposed optimal method is feasible to develop shim coil for ASG.


2020 ◽  
Vol 11 (1) ◽  
pp. 20
Author(s):  
Muhammad Ikbal Abdullah ◽  
Andi Chairil Furqan ◽  
Nina Yusnita Yamin ◽  
Fahri Eka Oktora

This study aims to analyze the sensitivity testing using measurements of realization of regional own-source revenues and operating expenditure and to analyze the extent of the effect of sample differences between Java and non-Java provinces by using samples outside of Java. By using sensitivity analysis, the results found the influence of audit opinion on the performance of the provincial government mediated by the realization of regional operating expenditure. More specifically, when using the measurement of the absolute value of the realization of regional operating expenditure it was found that there was a direct positive and significant influence of audit opinion on the performance of the Provincial Government. However, no significant effect of audit opinion was found on the realization value of regional operating expenditure and the effect of the realization value of regional operating expenditure on the performance of the Provincial Government. This result implies that an increase in audit opinion will be more likely to be used as an incentive for the Provincial Government to increase the realization of regional operating expenditure.


1977 ◽  
Vol 32 (11-12) ◽  
pp. 908-912 ◽  
Author(s):  
H. J. Schmidt ◽  
U. Schaum ◽  
J. P. Pichotka

Abstract The influence of five different methods of homogenisation (1. The method according to Potter and Elvehjem, 2. A modification of this method called Potter S, 3. The method of Dounce, 4. Homogenisation by hypersonic waves and 5. Coarce-grained homogenisation with the “Mikro-fleischwolf”) on the absolute value and stability of oxygen uptake of guinea pig liver homogenates has been investigated in simultaneous measurements. All homogenates showed a characteristic fall of oxygen uptake during measuring time (3 hours). The modified method according to Potter and Elvehjem called Potter S showed reproducible results without any influence by homogenisation intensity.


Author(s):  
PALOMA BENGOECHEA

Abstract We refine a previous construction by Akhtari and Bhargava so that, for every positive integer m, we obtain a positive proportion of Thue equations F(x, y) = h that fail the integral Hasse principle simultaneously for every positive integer h less than m. The binary forms F have fixed degree ≥ 3 and are ordered by the absolute value of the maximum of the coefficients.


The values of gravity at these stations have been compared by means of pendulum observations with Invar invariable pendulums. The observed differences of gravity from the National Physical Laboratory are: B. I. P. M. -256·73 ± 0·49 mgal P. T. B. + 68·68 ± 0·49 mgal Bad Harzburg - 15·68 ± 0·49 mgal The accuracy of the measurements is not so great as has been achieved once or twice previously with the same apparatus, mainly because the changes in the lengths of the pendulums were greater than usual. These differences have been combined with German pendulum observations and with gravimeter comparisons with the following results: Value of gravity at N. P. L. on the Potsdam system: 981196·29 ± 0·3 mgal. Differences between sites of absolute determinations of gravity: N. P. L. - B. I. P. M. +256·45 ± 0·3 mgal N. P. L. - P. T. B. - 68·98 ± 0·3 mgal P. T. B. - Potsdam - 8·95 ± 0·4 mgal ( g at Potsdam = 981274 mgal.) The effects of these results on gravity surveys based on Cambridge and on the absolute value of gravity are indicated.


1996 ◽  
Vol 35 (6) ◽  
pp. 830-838 ◽  
Author(s):  
Jingping Duan ◽  
Michael Bevis ◽  
Peng Fang ◽  
Yehuda Bock ◽  
Steven Chiswell ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document