scholarly journals Latvian Electric Vehicle Fast Charging Infrastructure: Results of the First Year of Operation

2019 ◽  
Vol 23 (2) ◽  
pp. 9-21
Author(s):  
Aivars Rubenis ◽  
Aigars Laizans ◽  
Andra Zvirbule

Abstract This article presents preliminary analysis of the Latvian national EV fast - charging network after the first year of operation. The first phase of Latvian national EV fast-charging network was launched in 2018 with 70 charging stations on the TEN-T roads and in the largest towns and cities. The article looks at the initial results, both looking at the total capacity utilization for individual charging stations, determining the hourly charging distribution; and to the utilization of the network as a whole. The results present that there is a very large dispersion of the data, most of the charging events happening in a few charging stations in and around the capital of Latvia. However, there have been charging events in all charging stations, even in the most remote ones. Even more skewed distribution was observed analyzing the charging habits of the EV users, with 10 % of users accounting for more than half of the charging events. This should be taken into account when considering applying the results for the future, expecting larger number of electric vehicles in Latvia.

2018 ◽  
Vol 9 (1) ◽  
pp. 14 ◽  
Author(s):  
Julia Krause ◽  
Stefan Ladwig ◽  
Lotte Saupp ◽  
Denis Horn ◽  
Alexander Schmidt ◽  
...  

Fast-charging infrastructure with charging time of 20–30 min can help minimizing current perceived limitations of electric vehicles, especially considering the unbalanced and incomprehensive distribution of charging options combined with a long perceived charging time. Positioned on optimal location from user and business perspective, the technology is assumed to help increasing the usage of an electric vehicle (EV). Considering the user perspectives, current and potential EV users were interviewed in two different surveys about optimal fast-charging locations depending on travel purposes and relevant location criteria. The obtained results show that customers prefer to rather charge at origins and destinations than during the trip. For longer distances, charging locations on axes with attractive points of interest are also considered as optimal. From the business model point of view, fast-charging stations at destinations are controversial. The expensive infrastructure and the therefore needed large number of charging sessions are in conflict with the comparatively time consuming stay.


Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7566
Author(s):  
Naireeta Deb ◽  
Rajendra Singh ◽  
Richard R. Brooks ◽  
Kevin Bai

The expansion of electric vehicles made the expansion of charging infrastructure rudimentary to keep up with this developing technology that helps people in a myriad of ways. The main drawback in electric vehicle charging, however, is the time consumed to charge a vehicle. The fast charging of electric vehicles solves this problem thus making it a lucrative technology for consumers. However, the fast charging technology is not without its limitations. In this paper we have identified the technology gaps in EV fast charging stations mostly focused on the extremely fast charging topology. It will help pave a path for researchers to direct their effort in a consolidated manner to contribute to the fast charging infrastructure. A thorough review of all aspects and limitations of existing extremely fast charging (XFC) stations have been identified and supporting data are provided. The importance of DC power network based on free fuel energy sources and silicon carbide-based power electronics are proposed to provide ultra-low cost and ultra-high speed XFC stations.


2019 ◽  
Vol 100 ◽  
pp. 00018
Author(s):  
Maciej Gis ◽  
Mateusz Bednarski ◽  
Piotr Orliński

Electromobility is a European vision of future motorization. In Poland, there are plans to introduce a million vehicles of this type by 2030. Currently, their share is marginal (about 1 percent). This vision is to be made real. This is due to the fact that vehicle manufacturers are developing newer EV vehicle constructions. Increasing the number of electric vehicles requires the development of their charging infrastructure. Based on the work of the authors regarding the EV vehicle charging network on the Trans-European Transport Network road network, it was possible to extend this issue with energy calculations related to energy demand for supplying the EV vehicle charging network. This is an important topic from the point of view of the State’s energy needs. The calculations made in the article present the problem of the need to increase the production of electricity, which in the case of Poland is associated with increased emissions of harmful substances and the possibility of periodic interruptions in the supply of electricity. Due to excessive domestic consumption with too little production. The second issue is the need to supply electricity to the charging station (infrastructure), as well as transmission losses, which limit the possibility of building multi-station fast charging stations. The issue presented by the authors in this article is one of the key problems relating to the introduction of electromobility in Poland. The key is to determine how large the demand for electricity in the country will be if a greater number of electric vehicles is put into operation. Considering that there are power shortages during a hot summer, this may affect the possibility of using electric vehicles in the country.


2022 ◽  
pp. 114-132
Author(s):  
Gagandeep Sharma ◽  
Vijay K. Sood

This chapter discusses the available charging systems for electric vehicles (EV) which include battery electric vehicles (BEV) and plugged hybrid electric vehicles (PHEV). These architectures are categorized as common DC bus charging (CDCB) station and common AC bus charging (CACB) station. CACB charging stations are generally used as slow chargers or semi-fast chargers (on-board chargers). CDCB charging stations are used as fast chargers (off-board chargers). These chargers are vital to popularize the electric vehicles (EVs) as a green alternative to the internal combustion engine (ICE) vehicles. Further, this chapter covers the power quality problems related to the grid-connected fast charging stations (FCS), AC-DC converter, control strategies for converters, proposed system of architectures, methodology, system results with comparisons, and finally, a conclusion.


Author(s):  
Mohamad Nassereddine

AbstractRenewable energy sources are widely installed across countries. In recent years, the capacity of the installed renewable network supports large percentage of the required electrical loads. The relying on renewable energy sources to support the required electrical loads could have a catastrophic impact on the network stability under sudden change in weather conditions. Also, the recent deployment of fast charging stations for electric vehicles adds additional load burden on the electrical work. The fast charging stations require large amount of power for short period. This major increase in power load with the presence of renewable energy generation, increases the risk of power failure/outage due to overload scenarios. To mitigate the issue, the paper introduces the machine learning roles to ensure network stability and reliability always maintained. The paper contains valuable information on the data collection devises within the power network, how these data can be used to ensure system stability. The paper introduces the architect for the machine learning algorithm to monitor and manage the installed renewable energy sources and fast charging stations for optimum power grid network stability. Case study is included.


2021 ◽  
Author(s):  
F. Chen ◽  
Q. Zhong ◽  
H. Zhang ◽  
M. Zhu ◽  
S. Müller ◽  
...  

2019 ◽  
Vol 10 (2) ◽  
pp. 42 ◽  
Author(s):  
Igna Vermeulen ◽  
Jurjen Rienk Helmus ◽  
Mike Lees ◽  
Robert van den Hoed

The Netherlands is a frontrunner in the field of public charging infrastructure, having one of the highest number of public charging stations per electric vehicle (EV) in the world. During the early years of adoption (2012–2015), a large percentage of the EV fleet were plugin hybrid electric vehicles (PHEV) due to the subsidy scheme at that time. With an increasing number of full electric vehicles (FEVs) on the market and a current subsidy scheme for FEVs only, a transition of the EV fleet from PHEV to FEV is expected. This is hypothesized to have an effect on the charging behavior of the complete fleet, and is reason to understand better how PHEVs and FEVs differ in charging behavior and how this impacts charging infrastructure usage. In this paper, the effects of the transition of PHEV to FEV is simulated by extending an existing agent-based model. Results show important effects of this transition on charging infrastructure performance.


Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1937 ◽  
Author(s):  
Germana Trentadue ◽  
Alexandre Lucas ◽  
Marcos Otura ◽  
Konstantinos Pliakostathis ◽  
Marco Zanni ◽  
...  

Multi-type fast charging stations are being deployed over Europe as electric vehicle adoption becomes more popular. The growth of an electrical charging infrastructure in different countries poses different challenges related to its installation. One of these challenges is related to weather conditions that are extremely heterogeneous due to different latitudes, in which fast charging stations are located and whose impact on the charging performance is often neglected or unknown. The present study focused on the evaluation of the electric vehicle (EV) charging process with fast charging devices (up to 50 kW) at ambient (25 °C) and at extreme temperatures (−25 °C, −15 °C, +40 °C). A sample of seven fast chargers and two electric vehicles (CCS (combined charging system) and CHAdeMO (CHArge de Move)) available on the commercial market was considered in the study. Three phase voltages and currents at the wall socket, where the charger was connected, as well as voltage and current at the plug connection between the charger and vehicle have been recorded. According to SAE (Society of Automotive Engineers) J2894/1, the power conversion efficiency during the charging process has been calculated as the ratio between the instantaneous DC power delivered to the vehicle and the instantaneous AC power supplied from the grid in order to test the performance of the charger. The inverse of the efficiency of the charging process, i.e., a kind of energy return ratio (ERR), has been calculated as the ratio between the AC energy supplied by the grid to the electric vehicle supply equipment (EVSE) and the energy delivered to the vehicle’s battery. The evaluation has shown a varied scenario, confirming the efficiency values declared by the manufacturers at ambient temperature and reporting lower energy efficiencies at extreme temperatures, due to lower requested and, thus, delivered power levels. The lowest and highest power conversion efficiencies of 39% and 93% were observed at −25 °C and ambient temperature (+25 °C), respectively.


Sign in / Sign up

Export Citation Format

Share Document