Cetyltrimethylammonium bromide- and ethylene glycol-assisted preparation of mono-dispersed indium oxide nanoparticles using hydrothermal method

2014 ◽  
Vol 68 (8) ◽  
Author(s):  
Selvakumar Dhanasingh ◽  
Dharmaraj Nallasamy ◽  
Saravanan Padmanapan ◽  
Vinod Padaki
Keyword(s):  
Ethylene Glycol ◽  
Hydrothermal Method ◽  
Indium Oxide ◽  
Cetyltrimethylammonium Bromide ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns

AbstractThe influence of cetyltrimethylammonium bromide and ethylene glycol on the size and dispersion of indium oxide nanoparticles prepared under hydrothermal conditions was investigated. The precursor compound, indium hydroxide, obtained by the hydrothermal method in the absence as well as the presence of cetyltrimethylammonium bromide, was converted to indium oxide by sintering at 400°C. The formation of nanoscale indium oxide upon sintering was ascertained by the characteristic infrared adsorption bands and X-ray diffraction patterns of indium oxide. Transmission electron microscopy and band gap values confirmed that the cetyltrimethylammonium bromide facilitated the formation of indium oxide nanoparticles smaller in size and narrower in distribution than those prepared without the assistance of cetyltrimethylammonium bromide.

Chemistry, morphology and structural characteristics of synthetic Al-lizardite

Clay Minerals ◽  
2010 ◽  
Vol 45 (2) ◽  
pp. 131-143 ◽  
Author(s):  
M. Bentabol ◽  
M. D. Ruiz Cruz ◽  
I. Sobrados
Keyword(s):  
Structural Characteristics ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
Single Population ◽  
X Ray ◽  
Cell Parameters ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Microscopy Images ◽  
Stacking Disorder

AbstractAl-lizardite has been synthesized under hydrothermal conditions (200ºC). Morphologically, Al-lizardite consists of thin platy particles ~400 Å wide and ~150 Å thick. Structurally, the X-ray diffraction patterns indicate that the 2H2 polytype is dominant, with cell parameters: a = 5.311(0.006) Å; c = 14.333 (0.013) Å and space group P63. High-resolution transmission electron microscopy images revealed, however, the presence of other polytypes and abundant stacking disorder. Chemically, Al-lizardite consists of a single population with average tetrahedral composition Si1.74Al0.26. In contrast to previously described Al-rich serpentines (amesite and Al-lizardite), this Al-lizardite is characterized by an asymmetrical Al distribution, with VIAl ≈0.70 and IVAl ≈0.25 atoms per formula unit.

Facile Refluxing Synthesis of Hydroxyapatite Nanoparticles

2015 ◽  
Vol 68 (8) ◽  
pp. 1293 ◽  
Author(s):  
Pakvipar Chaopanich ◽  
Punnama Siriphannon
Keyword(s):  
Crystallite Size ◽  
Reaction Times ◽  
Single Step ◽  
Hydroxyapatite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Aqueous Mixture ◽  
Diffraction Patterns ◽  
Microscopy Images

Hydroxyapatite (HAp) nanoparticles were successfully synthesized from an aqueous mixture of Ca(NO3)2·4H2O and (NH4)2HPO4 by a facile single-step refluxing method using polystyrene sulfonate (PSS) as a template. The effects of reaction times, pH, and PSS concentration on the HAp formation were investigated. It was found that the crystalline HAp was obtained under all conditions after refluxing the precursors for 3 and 6 h. The longer refluxing time, the greater the crystallinity and the larger the crystallite size of the HAp nanoparticles. The HAp with poor crystallinity was obtained at pH 8.5; however, the well-crystallized HAp was obtained when reaction pH was increased to 9.5 and 10.5. In addition, the X-ray diffraction patterns revealed that the presence of PSS template caused the reduction of HAp crystallite size along the (002) plane from 52.6 nm of non-template HAp to 43.4 nm and 41.4 nm of HAp with 0.05 and 0.2 wt-% PSS template, respectively. Transmission electron microscopy images of the synthesized HAp revealed the rod-shaped crystals of all samples. The synthesized HAp nanoparticles were modified by l-aspartic acid (Asp) and l-arginine (Arg), having negative and positive charges, respectively. It was found that the zeta potential of HAp was significantly changed from +5.46 to –24.70 mV after modification with Asp, whereas it was +4.72 mV in the Arg-modified HAp. These results suggested that the negatively charged amino acid was preferentially adsorbed onto the synthesized HAp surface.

A Chemical Solution Route to Rapid Synthesis of Homogeneous Bi100−xSbx Alloys Nanoparticles at Room Temperature

2007 ◽  
Vol 7 (2) ◽  
pp. 525-529 ◽  
Author(s):  
Bo Zhou ◽  
Jun-Jie Zhu
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Solution Route ◽  
Diffraction Patterns ◽  
Co Reduction ◽  
Chemical Solution Route

A chemical co-reduction route in aqueous solution was developed to synthesize Bi100−xSbx alloys at room temperature. The hydrolyses of Bi(III) and Sb(III) were effectively avoided by selecting proper raw materials and coordinator. X-ray diffraction analysis indicated that the as-prepared Bi100−xSbx alloys were homogeneous and phase-pure, and the Bi/Sb ratios in the alloys were very close to those in the aqueous solutions. The transmission electron microscope observation showed that the as-prepared Bi100−xSbx (x = 0∼100) alloys were particles with a size of tens of nanometers. The selected area electron diffraction patterns confirmed the high crystallinity, the homogeneousness, and the composition controllability of as-prepared alloys. All these characters and the nanometer-scaled size of the alloys are believed to be beneficial to the thermoelectric property of the Bi100−xSbx alloys.

scholarly journals Synthesis and Characterization of Nano-Tungsten Oxide Precipitated onto Natural Inorganic Clay for Humidity-Sensing Applications

Ceramics ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 120-127 ◽  
Author(s):  
Ahmed Afify ◽  
Ahmed Elsayed ◽  
Mohamed Hassan ◽  
Mohamed Ataalla ◽  
Amr Mohamed ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Tungsten Oxide ◽  
Diffraction Field ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Applications ◽  
Transmission Electron ◽  
Tungsten Oxide Nanoparticles ◽  
Inorganic Clay

A wet chemical method was used to obtain tungsten oxide nanoparticles from tungsten tetrachloride and natural microfibrous inorganic clay (sepiolite) as a starting material. Precipitation of tungsten oxide species onto sepiolite under basic conditions and subsequent thermal treatment was investigated, prompted by the abundance of sepiolite in nature and the useful environmental applications that could be attained. Laser granulometry, X-ray diffraction, field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), and high-resolution transmission electron microscopy (HR-TEM) techniques were used to study the particle-size distribution, the morphology, and the composition of the prepared sample. Our findings show the presence of tungsten oxide nanoparticles, which are less than 50 nm, on the needles of the modified sepiolite.

scholarly journals Bioactivities of Geranium wallichianum Leaf Extracts Conjugated with Zinc Oxide Nanoparticles

Biomolecules ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 38 ◽  
Author(s):  
Banzeer Ahsan Abbasi ◽  
Javed Iqbal ◽  
Riaz Ahmad ◽  
Layiq Zia ◽  
Sobia Kanwal ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Energy Dispersive ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Leaf Extracts ◽  
Tem Analysis ◽  
X Ray ◽  
Transmission Electron

This study attempts to obtain and test the bioactivities of leaf extracts from a medicinal plant, Geranium wallichianum (GW), when conjugated with zinc oxide nanoparticles (ZnONPs). The integrity of leaf extract-conjugated ZnONPs (GW-ZnONPs) was confirmed using various techniques, including Ultraviolet–visible spectroscopy, X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, energy-dispersive spectra (EDS), scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The size of ZnONPs was approximately 18 nm, which was determined by TEM analysis. Additionally, the energy-dispersive spectra (EDS) revealed that NPs have zinc in its pure form. Bioactivities of GW-ZnONPs including antimicrobial potentials, cytotoxicity, antioxidative capacities, inhibition potentials against α-amylase, and protein kinases, as well as biocompatibility were intensively tested and confirmed. Altogether, the results revealed that GW-ZnONPs are non-toxic, biocompatible, and have considerable potential in biological applications.

Millable Polyurethane/Organoclay Nanocomposites: Preparation, Characterization, and Properties

2007 ◽  
Vol 7 (2) ◽  
pp. 634-640 ◽  
Author(s):  
M. Siliani ◽  
M. A. López-Manchado ◽  
J. L. Valentín ◽  
M. Arroyo ◽  
A. Marcos ◽  
...  
Keyword(s):  
Barrier Properties ◽  
Substantial Improvement ◽  
Nanometer Scale ◽  
X Ray Diffraction ◽  
Transformation Techniques ◽  
Covalent Bonds ◽  
X Ray ◽  
Transmission Electron ◽  
Organically Modified ◽  
Diffraction Patterns

Novel millable polyurethane (PU)/organoclay nanocomposites have been successfully prepared by conventional transformation techniques. One natural (C6A) and two organically modified (C15A and C30B) montmorillonites have been used as clays for preparing PU nanocomposites. The optimum dispersion of nanofiller at a nanometer scale in PU matrix was confirmed by X-ray diffraction patterns and transmission electron microscopy. A substantial improvement of the PU properties by addition of only a small amount of organoclay was observed. It is worthy to note that the organoclays show a different interfacial interaction with the PU matrix, which was reflected in different macroscopic properties. Thus, C30B organoclay seems to react with PU chains to form covalent bonds, while C15Aonly interacts physically with PU chains. Mechanical and barrier properties are analyzed.

scholarly journals The Reliability Improvement of Cu Interconnection by the Control of Crystallizedα-Ta/TaNxDiffusion Barrier

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Wei-Lin Wang ◽  
Chia-Ti Wang ◽  
Wei-Chun Chen ◽  
Kuo-Tzu Peng ◽  
Ming-Hsin Yeh ◽  
...  
Keyword(s):  
Diffusion Barrier ◽  
Practical Application ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Reliability Improvement ◽  
N Concentration ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Interconnection Structure

Ta/TaN bilayers have been deposited by a commercial self-ionized plasma (SIP) system. The microstructures of Ta/TaN bilayers have been systematically characterized by X-ray diffraction patterns and cross-sectional transmission electron microscopy. TaN films deposited by SIP system are amorphous. The crystalline behavior of Ta film can be controlled by the N concentration of underlying TaN film. On amorphous TaN film with low N concentration, overdeposited Ta film is the mixture ofα- andβ-phases with amorphous-like structure. Increasing the N concentration of amorphous TaN underlayer successfully leads upper Ta film to form pureα-phase. For the practical application, the electrical property and reliability of Cu interconnection structure have been investigated by utilizing various types of Ta/TaN diffusion barrier. The diffusion barrier fabricated by the combination of crystallizedα-Ta and TaN with high N concentration efficiently reduces the KRc and improves the EM resistance of Cu interconnection structure.

Homogeneity in the Polyether Alkoxide Sol‐Gel Synthesis of YBa2Cu3O7-δ

1994 ◽  
Vol 346 ◽  
Author(s):  
Carol S. Houk ◽  
Gary A. Burgoine ◽  
Catherine J. Page
Keyword(s):  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Mapping Techniques ◽  
Starting Solutions ◽  
Average Size ◽  
Sol Gel Synthesis ◽  
Elemental Maps

ABSTRACTWe have investigated the homogeneity of sol‐gel derived YBa2Cu307‐s from the solution phase to the final product using transmission electron microscopy (TEM), x‐ray diffraction (XRD), and Energy Dispersive X‐ray (EDX) lateral mapping techniques. The starting solutions contain stoichiometric amounts of the metal 2‐(2‐methoxyethoxy)ethoxide components in 2‐(2‐methoxyethoxy)ethanol and appear to be homogeneous by TEM with a uniform distribution of particles having an average size of less than 40 â. Through elemental mapping we see elemental segregation in the high temperature (950 °C) products, which are orthorhombic by XRD. In elemental maps of gel samples fired to 700 °C, which are tetragonal by XRD, we also see elemental inhomogeneity within particles and phase zoning in maps of products from finely ground gels. A comparison of elemental maps and x‐ray diffraction patterns of the products from gel processing and conventional solid state processing is made.

scholarly journals The High Photocatalytic Activity of SnO2Nanoparticles Synthesized by Hydrothermal Method

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Pham Van Viet ◽  
Cao Minh Thi ◽  
Le Van Hieu
Keyword(s):  
Photocatalytic Activity ◽  
Hydrothermal Method ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Uv Illumination ◽  
Transmission Electron ◽  
Uv Visible ◽  
Tin Oxide Nanoparticles

Tin oxide nanoparticles (SnO2NPs) were prepared at low temperature by hydrothermal method. Synthesized SnO2NPs were confirmedviacharacterization techniques such as UV-visible spectroscopy (UV-vis), X-ray diffraction (XRD), and Transmission Electron Microscope (TEM). The synthesized nanoparticles were in the size of 3 nm and they have high photocatalytic activity. The result showed that SnO2NPs degraded 88.88% MB solution after 30 minutes of UV illumination and reached 90.0% for 120 minutes (2 hours) of UV illumination. Moreover, they degraded 79.26% MB solution after 90 minutes (1.5 hours) under assisted sunlight illumination.

Structural properties of molecular beam epitaxy grown Ni/Pt superlattices

1997 ◽  
Vol 12 (1) ◽  
pp. 161-174 ◽  
Author(s):  
W. Staiger ◽  
A. Michel ◽  
V. Pierron-Bohnes ◽  
N. Hermann ◽  
M. C. Cadeville
Keyword(s):  
Molecular Beam ◽  
Growth Direction ◽  
Misfit Dislocations ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Superlattice Peak ◽  
Diffraction Peaks ◽  
Diffraction Patterns

We find that the [Ni3.2nmPt1.6nm] × 15 and [Ni3.2nmPt0.8nm] × 15 multilayers are semicoherent and display a columnar morphology. From both the period of the moir’e fringes and the positions of the diffraction peaks in electronic (plan-view and crosssection geometries) and x-ray diffraction patterns, one deduces that the nickel is relaxed (at least in the error bars of all our measurements), whereas the platinum remains slightly strained (≈−1%). The interfaces are sharp; no intermixing takes place giving rise to neat contrasts in transmission electron microscopy (TEM) and to high intensities of the superlattice peaks in the growth direction in both diffraction techniques. The relaxation of the interfacial misfit occurs partially through misfit dislocations, partially through the strain of platinum. A quasiperiodic twinning occurs at the interfaces, the stacking fault which forms the twin being the most often located at the interface Pt/Ni, i.e., when a Pt layer begins to grow on the Ni layer. The simulation of the θ/2θ superlattice peak intensities takes into account the columnar microstructure. It shows that the roughness is predominantly at medium scale with a fluctuation of about 12.5% for Ni layers and negligible for Pt layers.

Sign in / Sign up

Export Citation Format

Share Document