scholarly journals Chitosan inserts for periodontitis: Influence of drug loading, plasticizer and crosslinking on in vitro metronidazole release

2007 ◽  
Vol 57 (4) ◽  
pp. 469-477 ◽  
Author(s):  
Romi Barat ◽  
Anegundha Srinatha ◽  
Jayanta Pandit ◽  
Shampa Anupurba ◽  
Neelam Mittal
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Dissolution Time ◽  
Cross Linking ◽  
Burst Release ◽  
Casting Method ◽  
The Mean ◽  
Polymer Ratio

Chitosan inserts for periodontitis: Influence of drug loading, plasticizer and crosslinking onin vitrometronidazole releaseChitosan based metronidazole (MZ) inserts were fabricated by the casting method and characterized with respect to mass and thickness uniformity, metronidazole loading andin vitrometronidazole release kinetics. The fabricated inserts exhibited satisfactory physical characteristics. The mass of inserts was in the range of 5.63 ± 0.42 to 6.04 ± 0.89 mg. The thickness ranged from 0.46 ± 0.06 to 0.49 ± 0.08 mm. Metronidazole loading was in the range of 0.98 ± 0.09 to 1.07 ± 0.07 mg except for batch CM3 with MZ loading of 2.01 ± 0.08 mg. The inserts exhibited an initial burst release at the end of 24 h, irrespective of the drug to polymer ratio, plasticizer content or cross-linking. However, further drug release was sustained over the next 6 days. Cross-linking with 10% (m/m) of glutaraldehyde inhibited the burst release by ~30% and increased the mean dissolution time (MDT) from 0.67 to 8.59 days. The decrease in drug release was a result of reduced permeability of chitosan due to cross-linking.

DEVELOPMENT AND CHARACTERIZATION OF GASTRO RETENTIVE MUCOADHESIVE MICROBEADS CONTAINING SIMVASTATIN WITH DIFFERENT CROSS LINKING AGENTS

2020 ◽  
pp. 118-126
Author(s):  
VENKATA RAMANA REDDY K. ◽  
NAGABHUSHANAM M. V. ◽  
PAMULA REDDY B. ◽  
RAVINDAR NAIK E.
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Aluminium Chloride ◽  
In Vitro Dissolution ◽  
Cross Linking ◽  
Stability Studies ◽  
Study Results ◽  
Curing Agents

Objective: The aim of the present work was to prepare and examine drug release of the oral controlled release microbeads using different curing agents by emulsification internal ionic gelation technique. Methods: Cross-linked alginate microbeads were prepared with different cross linking agents by using mucoadhesive properties. The formation and compatibility of microbeads were confirmed by compatibility studies. Prepared microbeads evaluated for encapsulated efficiency, micromeritic properties, drug loading, in vitro wash off studies, in vitro dissolution studies, drug release kinetics and stability studies Results: The in vitro drug release was influenced by both type of curing agents and type of polymers and no significant changes in characterization parameters was observed after 3 mo stability studies. The sustained release profile of optimized batch was found to be 99.66±0.18% in comparison to pure drug profile of 28.64±0.02% at 12 h release study. Results of both wash-off and in vitro studies suggests that batch (SF2) prepared with aluminium chloride has shown better mucoadhesive property. Drug release of optimized batch follows zero order with non fickian mechanism according to Korsmeyer-Peppas equation. Conclusion: The data suggest the use of simvastatin mucoadhesive cross linked microbeads to offer the potential for oral controlled drug delivery with improved gastric retention and capable to provide sustained drug release by using cross linking agents.

scholarly journals Modification of Ceiba pentandra cellulose for drug release applications

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 194-202
Author(s):  
Silvia Argelia Peraza-Ku ◽  
José Manuel Cervantes-Uc ◽  
Beatriz Escobar-Morales ◽  
Jorge Alonso Uribe-Calderon
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Cross Linking ◽  
Burst Release ◽  
Tetracarboxylic Acid ◽  
Ceiba Pentandra ◽  
Release Studies ◽  
The Cross ◽  
The Fourier Transform

AbstractTubular fibers (raw and wax-free) from Ceiba pentandra (CP) were cross-linked with butane-1,2,3,4-tetracarboxylic acid (BTCA) at different concentrations to obtain a porous biodegradable medium for drug release applications. Chlorhexidine diacetate (CHX) was added to the cross-linked fibers for drug release studies. The Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy results indicated that the cross-linked fibers with a 5:1 fiber:BTCA ratio presented the higher cross-linking density. CHX was added at different concentrations (8% and 16% wt/wt); the elemental analysis indicated that CHX was loaded up to 7.99 wt%. In vitro studies showed a burst release of CHX within the first 3 h. CHX release kinetics was described using several models, with the Korsmeyer–Peppas equation, which adjusted better to the experimental data. The results indicated that the CP fibers are a feasible material for drug release applications.

scholarly journals Formulation and investigation of crushed puffed rice-chitosan-HPMC based polymeric blends as carrier for sustained stomach specific drug delivery of piroxicam using 3(2) Taguchi mathematical design studies

2018 ◽  
Vol 6 (11) ◽  
pp. 61-80 ◽  
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Hydroxypropyl Methylcellulose ◽  
Research Work ◽  
Pharmaceutical Journal ◽  
Weight Variation ◽  
Zero Order Release ◽  
Puffed Rice

In the present experimental investigation an attempt has been made to assess the utility of Crushed Puffed Rice (CPR)-High Molecular Weight Chitosan (HMWCH)-Hydroxypropyl Methylcellulose K15M (HPMC K15M) as a polymeric carrier for the sustained stomach delivery of Piroxicam (PRX). A total of nine formulations were prepared by using 3 (2) Taguchi factorial design, physically blending drug and polymer(s) followed by encapsulation into hard gelatin capsules size 1. The prepared capsules were evaluated for various performance such as weight variation, drug contents, in vitro buoyancy and drug release in 0.1 M HCl. The effect of drug loading on in vitro performance of the formulations was also determined. Crushed puffed rice (CPR) remained buoyant for up to average time span of 06 hr as an unwetted irregular mass in 0.1 M HCl. However, when combined with HMWCH or HPMC K15M or HPMC K15M + HMWCH a low -density cylindrical raft type hydrogel was formed which remained buoyant for up to 12 hr and released up to 99% drug in a sustained manner from 8 to 12 hr following zero order release kinetics. It was also observed that drug release from drug + CPR matrices followed Fickian mechanism. Combination of CPR + HMWCH or HMWCH + HPMC K15M also follows Fickian mechanism. Obtained data from the research work suggests that CPR in combination with HMWCH or HPMC K15M or HPMC has sufficient potential to be used as a carrier for stomach specific delivery of gastric irritant drug like PRX.Soni et al., International Current Pharmaceutical Journal, April 2018, 6(11): 61-80http://www.icpjonline.com/documents/Vol6Issue11/01.pdf

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals BIODEGRADABLE POLYMER: A NOVEL PHARMACEUTICAL CARRIER FOR SUSTAINED RELEASE OF METRONIDAZOLE

2017 ◽  
Vol 10 (10) ◽  
pp. 136
Author(s):  
Gayathri Hariharan ◽  
Priyanka Sinha
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Biodegradable Polymer ◽  
Drug Loading ◽  
Cross Linking ◽  
Loading Capacity ◽  
Flow Properties ◽  
Chitosan Microspheres

Objective: To optimize and evaluate the formulation of metronidazole (MT)-loaded chitosan microspheres and to investigate the efficiency of biodegradable polymer in developing sustained release formulation of MT to prolong the action of drug.Methods: MT microspheres were prepared using emulsion cross-linking method. Polymer-drug compatibility study was done using Fourier transform infrared. Physical characteristics were evaluated by particle size,SEM, flow properties etc. In vitro studies for evaluating drug release for MT-loaded chitosan microspheres were done by dissolution study.Results: Particle size of the formulated microspheres was found to be within the range of 110-130 μm. Flow properties of F1-F7 such as angle of repose, bulk density, and tapped density were found to be within limits. Drug entrapment efficiency was found to be better for all the formulations within the range of 74.82-84.32% w/w. Drug loading capacity was found to be in the range of 56-83.2% w/v. In vitro drug release was found to be in the range of 81.32-96.23% w/v.Conclusion: In spite of all the above results, we conclude that F5 formulation was optimized depending on the data obtained from the drug loading capacity and percentage drug release studies. F5 formulation is formulated with drug-polymer ratio 1:2 with 1% of di octyl sodium sulfo succinate and 8 ml of glutaraldehyde as a cross-linking agent.

scholarly journals PREPARATION, CHARACTERISATION AND EVALUATION OF ROPINIROLE HYDROCHLORIDE LOADED CONTROLLED RELEASE MICROSPHERES USING SOLVENT EVAPORATION TECHNIQUE

2018 ◽  
Vol 10 (6) ◽  
pp. 57
Author(s):  
Koyel Kar ◽  
R. N. Pal ◽  
N. N. Bala
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Solvent Evaporation ◽  
In Vitro Drug Release ◽  
Aqueous Solvent ◽  
Evaporation Technique ◽  
Ropinirole Hydrochloride

Objective: The major objective of the research work was to design, characterise and evaluate controlled release microspheres of ropinirole hydrochloride by using non-aqueous solvent evaporation technique to facilitate the delivery of the drug at a predetermined rate for a specific period of time.Methods: Ropinirole hydrochloride microspheres were prepared by using different low-density polymers such as eudragit RL 100, eudragit RS 100 and ethylcellulose either alone or in combination with the help of non-aqueous solvent evaporation technique. All the formulated microparticles were subjected to various evaluation parameters such as particle size analysis, micrometric properties, drug entrapment efficiency, percentage drug loading, percentage yield and in vitro drug release study. The compatibility of the drug and polymers was confirmed by physical compatibility study, fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and x-ray diffraction study (XRD). The formation of the most optimized batch of the microsphere (F12) was confirmed by scanning electron microscopy (SEM), DSC, FTIR, and XRD. In vitro drug release study and in vitro drug release kinetics study of the formulated microspheres were also carried out.Results: Drug-polymer compatibility studies performed with the help of FTIR and DSC indicated that there were no interactions. Results revealed that non-aqueous solvent evaporation technique was a suitable technique for the preparation of microspheres as most of the formulations were discrete, free-flowing and spherical in shape with a good yield of 55.67% to 80.09%, percentage drug loading of 35.52% to 94.50% and percentage drug entrapment efficiency of 36.24% to 95.07%. Different drug-polymer ratios, as well as the combination of polymers, played a significant role in the variation of over-all characteristics of formulations. Based on the data of various evaluation parameters such as particle size analysis, percentage drug loading, percentage drug entrapment, percentage yield, rheological studies and in vitro drug release characteristics, formulation F12 was found to fulfil the criteria of ideal controlled release drug delivery system. F12 showed controlled release till the 14th hour (97.99%) and its in vitro release kinetics was best explained by zero-order kinetics and followed Korsemeyer-Pappas model (Non-Fickian mechanism). SEM of F12 revealed the formation of spherical structures. The FTIR study of F12 confirmed the stable nature of ropinirole in the drug-loaded microspheres. DSC and XRD patterns showed that ropinirole hydrochloride was dispersed at the molecular level in the polymer matrix.Conclusion: The controlled release microparticles were successfully prepared and from this study, it was concluded that the developed microspheres of ropinirole hydrochloride can be used for controlled drug release to improve the bioavailability and patient compliance and to maintain a constant drug level in the blood target tissue by releasing the drug in zero order pattern.

scholarly journals Formulation and evaluation of chitosan films containing sparfloxacin for the treatment of periodontitis

2019 ◽  
Vol 9 (1) ◽  
pp. 38-45 ◽  
Author(s):  
Santoshi Naik ◽  
Prasiddhi Raikar ◽  
Mohammed Gulzar Ahmed
Keyword(s):  
Antibacterial Activity ◽  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Periodontal Pocket ◽  
Content Uniformity ◽  
Burst Release ◽  
In Vitro Antibacterial Activity ◽  
Chitosan Films

In the present study an attempt has been made to formulate and evaluate a sustained release periodontal film of Sparfloxacin with biodegradable, cost effective polymer Chitosan. The objective of the study was to formulate intra-pocket periodontal films, which could be easily placed into the periodontal pocket, and thus be capable of delivering therapeutic concentrations of drug. Sparfloxacin is an antibiotic, showing wide spectrum antibacterial activity against a number of periodontal pathogens. Hence Sparfloxacin is selected as model for site specific delivery, i.e., into periodontal pocket for the treatment of periodontitis. In the present investigation Chitosan films containing Sparfloxacin were prepared by solution casting method using acetic acid. The copolymers HPMC K4M, Sodium CMC and Eudragit RL 100 in the concentrations of 10%, 20% and 30% w/w of Chitosan were added into the polymeric solution. Propylene glycol was used as plasticizer. FT-IR and UV spectroscopic methods revealed no interaction between Sparfloxacin and polymers. The drug loaded films were evaluated for their thickness, weight variation, content uniformity, tensile strength, percent elongation, percentage moisture loss, surface pH, folding endurance, in- vitro drug release studies, in - vitro antibacterial activity and stability studies. Periodontal films showed initial burst release of drug on 1st day and then the release was sustained for a period of 8 days. In – vitro antibacterial activity was carried out on staphylococcus aureus and the antibacterial activity was retained for 96 hours. In - vitro release from periodontal films was fit to kinetic models to reveal drug release kinetics. Keywords: Periodontitis, Sparfloxacin, Bio-adhesive polymers.

Combine Drug Delivery of Thymoquinone-Doxorubicin by Cockle Shellderived pH-sensitive Aragonite CaCO3 Nanoparticles

2020 ◽  
Vol 10 (4) ◽  
pp. 518-533 ◽  
Author(s):  
Kehinde M. Ibiyeye ◽  
Abu B.Z. Zuki ◽  
Norshariza Nurdin ◽  
Mokrish Ajat
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Calcium Carbonate ◽  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Ph Sensitive ◽  
Multiple Drug ◽  
Burst Release ◽  
Cockle Shell

Background: Cockleshell-derived aragonite calcium carbonate nanoparticles were prepared by the top-down approach for combine delivery of two types of drugs. Objective: The aim of this study was to synthesize and characterize thymoquinone-doxorubicin loaded cockle shell-derived aragonite calcium carbonate nanoparticle. Aragonite calcium carbonate nanoparticles encapsulating thymoquinone and doxorubicin alone were also prepared. Methods: The blank and drug-loaded nanoparticles were characterized by field emission scanning electron microscopy, transmission electron microscopy, Zeta potential, Fourier transformed infrared and X-ray diffraction. Drug delivery properties, in vitro drug release study at pH 7.4, 6 and 4.8, and effect of blank nanoparticles on MCF10A, 3T3, MDA MB231 cells were also analyzed. Results: The blank and drug-loaded nanoparticles were pleomorphic and their sizes varying from 53.65 ± 10.29 nm to 60.49 ± 11.36 nm with an overall negative charge. The entrapment efficiency of thymoquinone and doxorubicin were 41.6 and 95.8, respectively. The FTIR showed little alteration after loading thymoquinone and doxorubicin while XRD patterns revealed no changes in the crystallizations of nanoparticles after drug loading. The drug release kinetics of doxorubicin and thymoquinone from the nanoparticles showed a continuous and gradual release after an initial burst release was observed. At pH 4.8, about 100% of drug release was noticed, 70% at pH 6 while only 50% at pH 7.4. The cell viability was 80% at a concentration of 1000 ug/ml of blank nanoparticle. Conclusion: The cockle shell-derived pH sensitive aragonite calcium carbonate nanoparticle provides an effective and simple means of multiple drug delivery and function as a platform for pH controlled release of loaded therapeutic agents.

5-Fluorouracil-Impregnated PLGA Coated Gold Nanoparticles for Augmented Delivery to Lung Cancer: in vitro Investigations

2021 ◽  
Vol 22 ◽  
Author(s):  
Rashmi Gupta ◽  
Leena Vishwakarma ◽  
Sunil Kant Guleri ◽  
Gourav Kumar
Keyword(s):  
Lung Cancer ◽  
Gold Nanoparticles ◽  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
A549 Cells ◽  
Double Emulsion ◽  
Zero Order Release ◽  
Reduced Toxicity

Background and Objective: The study aimed to investigate the augmented cytotoxic effects of polymer-coated (poly-lactic-co-glycolic acid-PLGA) gold nanoparticles (GNPs) carrying 5-fluorouracil (5-FU) in the management of lung cancer. Materials and Methods: In this study, several formulations were prepared using a double emulsion (water-oil-water) method and evaluated for drug release behavior, compatibility, cell line toxicity (A549), and apoptosis assessment. Results: Characterization results showed spherical polydispersed particles with size 29.11-178.21 nm, polydispersity index (PDI) 0.191-292, and zeta potential (ZP) 11.19-29.21 (-mV), respectively. The optimized polymer-coated 5-FU loaded gold nanoparticles (PFGNPs) illustrated a maximum drug loading (93.09 ± 10.75%) compared to others. The percent cumulative drug release of polymer-coated 5-FU loaded nanoparticles (PFNPs), 5-FU loaded gold nanoparticles (FGNPs), (PFGNPs) and 5-FU solution were 47.87± 1.5, 41.09±1.8, 56.31±1.05, and 98.8±4.2%, respectively, over 10 h. following zero-order release kinetics (except 5-FU solution). From the MTT results, the cytotoxic effect of PFGNPs on the A549 cells was 82.89 % compared to the 5-FU solution (74.91 %). EGFR and KRAS gene expression analysis under the influence of PFNPs, FGNPs, PFGNPs, and 5-FU was studied and observed maximum potency for PFNPs. Conclusion: PLGA coated biogenic gold nanoparticles have a combined effect to achieve high drug loading, sustained delivery, improved efficacy, and enhanced permeation. Conclusively, the approach may be promising to control lung cancer with reduced toxicity and improved efficacy.

scholarly journals PREPARATION AND CHARACTERIZATION OF CEFTRIAXONE SODIUM ENCAPSULATED CHITOSAN NANOPARTICLES

2017 ◽  
Vol 9 (6) ◽  
pp. 10 ◽  
Author(s):  
P. Manimekalai ◽  
R. Dhanalakshmi ◽  
R. Manavalan
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Chitosan Nanoparticles ◽  
Cross Linking ◽  
Burst Release ◽  
In Vitro Drug Release ◽  
Cumulative Percentage ◽  
Ceftriaxone Sodium

Objective: The objective of this study was to prepare ceftriaxone sodium chitosan nanoparticles (CS-NP) from different drug and polymer ratios and analyze their physicochemical characteristics.Methods: Ceftriaxone sodium loaded chitosan nanoparticles were prepared using chitosan as a polymer and tri sodium polyphosphate (TPP) as cross linking agent by ionic cross linking and coacervation with the aid of sonication. Various trials have been carried out for the confirmation of nanoformulation. Parameters such as the zeta potential, polydispersity, particle size, entrapment efficiency, in vitro drug release Thermo gravimetric analysis and scanning electron microscope of the nanoparticles were assessed for confirmation of nanoformulation.Results: The formulated nanoparticles showed mean particle size, polydispersity index and zeta potential to be 183.1±8.42 nm, 0.212±0.05, +38.5±1.6 mV respectively and the drug loading was found to be 46.42±10 %. In vitro drug release was showed a biphasic release pattern with initial burst release followed by sustained release of formulated nanoparticles. The cumulative percentage of drug release was about 83.08 %.Conclusion: Formulation F2 was found to be the best formulation with a higher cumulative percentage of drug release. Modified ionic gelation method can be utilized for the development of chitosan nanoparticles of ceftriaxone sodium. Polymer and crosslinking agent concentrations and sonication time are rate-limiting factors for the development of the optimized formulation. The chitosan nanoparticles developed would be capable of sustained delivery of ceftriaxone sodium.

Sign in / Sign up

Export Citation Format

Share Document