Resistance of ultra high performance fibre reinforced concrete to projectile impact

2014 ◽  
pp. 97-108 ◽  
Author(s):  
P. Máca ◽  
R. Sovják ◽  
T. Vavřiník
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
Fibre Reinforced Concrete ◽  
Projectile Impact ◽  
High Performance Fibre

scholarly journals Optimizing the Mechanical Properties of Ultra-High-Performance Fibre-Reinforced Concrete to Increase Its Resistance to Projectile Impact

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5098
Author(s):  
Anna L. Mina ◽  
Konstantinos G. Trezos ◽  
Michael F. Petrou
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Fibre Reinforced Concrete ◽  
Direct Tension ◽  
Steel Fibres ◽  
Projectile Impact ◽  
Binder Ratio ◽  
High Performance Fibre

This study describes an extensive experimental investigation of various mechanical properties of Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC). The scope is to achieve high strength and ductile behaviour, hence providing optimal resistance to projectile impact. Eight different mixtures were produced and tested, three mixtures of Ultra-High-Performance Concrete (UHPC) and five mixtures of UHPFRC, by changing the amount and length of the steel fibres, the quantity of the superplasticizer, and the water to binder (w/b) ratio. Full stress–strain curves from compression, direct tension, and flexural tests were obtained from one batch of each mixture to examine the influence of the above parameters on the mechanical properties. The Poisson’s ratio and modulus of elasticity in compression and direct tension were measured. Additionally, a factor was determined to convert the cubic strength to cylindrical. Based on the test results, the mixture with high volume (6%) and a combination of two lengths of steel fibres (3% each), water to binder ratio of 0.16% and 6.1% of superplasticizer to binder ratio exhibited the highest strength and presented great deformability in the plastic region. A numerical simulation developed using ABAQUS was capable of capturing very well the experimental three-point bending response of the UHPFRC best-performed mixture.

scholarly journals ULTRA-HIGH-PERFORMANCE FIBRE-REINFORCED CONCRETE UNDER HIGH-VELOCITY PROJECTILE IMPACT - PART 2. APPLICABILITY OF PREDICTION MODELS

2018 ◽  
Vol 58 (6) ◽  
pp. 355-364 ◽  
Author(s):  
Sebastjan Kravanja ◽  
Radoslav Sovják
Keyword(s):  
Reinforced Concrete ◽  
High Velocity ◽  
High Performance ◽  
Prediction Models ◽  
Analytical Models ◽  
Fibre Reinforced Concrete ◽  
Depth Of Penetration ◽  
Projectile Impact ◽  
Mass Ejection ◽  
High Performance Fibre

Semi-infinite targets of Ultra-High-Performance Fibre-Reinforced Concrete with various fibre volume fractions were subjected to the high-velocity projectile impact using in-service bullets. In this study, a variety of empirical and semi-analytical models for prediction of the depth of penetration and mass ejection were evaluated with respect to the experimental results. Models for the depth of penetration and spalling mass ejection were revisited and applied both with deformable and nondeformable projectiles parameters. The applicability of the prediction models was assessed through a statistical comparison of values from models with experimental results. The evaluation of the applicability was made through the newly proposed measure of a relative prediction accuracy for model selection and model estimation, which was verified with established statistical accuracy evaluations, such as accuracy ratio, logarithmic standard deviation and correlation coefficient. The best fit to the experimental readings was provided by newer semi-analytical models, which are incorporating additional concrete parameters beside compressive strength while the majority of older models failed to provide sufficient accuracy.

scholarly journals The comparison of projectile impact resistance of ultra-high-performance fibre-reinforced concrete with various aggregates

2021 ◽  
Vol 250 ◽  
pp. 06007
Author(s):  
Martina Drdlová ◽  
Martin Šperl
Keyword(s):  
Reinforced Concrete ◽  
High Speed ◽  
High Performance ◽  
Structural Integrity ◽  
Impact Load ◽  
Impact Resistance ◽  
Fibre Reinforced Concrete ◽  
Projectile Impact ◽  
The Impact ◽  
High Performance Fibre

In order to apply the ultra-high-performance fibre-reinforced concrete (UHPFRC) in the constructions of ballistic protective structures, the impact resistance of UHPFRC has been investigated experimentally by conducting the high-speed projectile penetration tests. 5 mixtures with basalt and corundum aggregates with various grain size have been prepared and subjected to the quasi-static and 7.62 x 54R B32 API projectile impact load using the striking velocity of 850 m/s. The influence of the strength, size and material of the aggregate on the projectile impact resistance represented by differential efficiency factor (DEF), structural integrity and area and height of impact crater has been evaluated. The superior projectile resistance of UHPFRC with corundum has been observed. Regarding the size of the aggregates, the incorporation of coarser aggregates brings better projectile impact resistance.

scholarly journals Behaviour of UHPFRCs in compression under high stress-rates

2018 ◽  
Vol 183 ◽  
pp. 02005
Author(s):  
Ezio Cadoni ◽  
Matteo Dotta ◽  
Daniele Forni
Keyword(s):  
Reinforced Concrete ◽  
Mechanical Behaviour ◽  
High Performance ◽  
High Stress ◽  
Slight Reduction ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Dynamic Event ◽  
The Matrix ◽  
High Performance Fibre

The paper presents the results obtained on cylindrical Ultra High Performance Fibre Reinforced Concrete specimens with diameter of 30mm and a height of 60mm under compression at high stress rate (1.7–2.3 TPa/s). Four different percentages of fibre reinforcement are considered (1, 2, 3, and 4% fibre content) and compared with the results of the matrix (UHPC). A slight reduction of the strength and fracture time with the introduction of fibres is observed. The experimental results are analysed and discussed with the intent to better understand the mechanical behaviour of UHPFRC materials in case of dynamic event under service loading conditions.

The new Pinel Bridge in Rouen, the fifth French road bridge using ultra high performance fibre-reinforced concrete components

2008 ◽  
Vol 17 (11) ◽  
pp. 316-317
Author(s):  
Daniel de MATTEIS ◽  
Pierre MARCHAND ◽  
Aude PETEL ◽  
Thierry THIBAUX ◽  
Nicolas FABRY ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
Fibre Reinforced Concrete ◽  
High Performance Fibre

Mechanical anisotropy of ultra-high performance fibre-reinforced concrete for 3D printing

2021 ◽  
pp. 104310
Author(s):  
Yekai Yang ◽  
Chengqing Wu ◽  
Zhongxian Liu ◽  
Hailiang Wang ◽  
Quanchang Ren
Keyword(s):  
Reinforced Concrete ◽  
3D Printing ◽  
High Performance ◽  
Mechanical Anisotropy ◽  
Fibre Reinforced Concrete ◽  
High Performance Fibre
Sign in / Sign up

Export Citation Format

Share Document