scholarly journals EFFECT OF TORREFACTION PROCESS ON PROPERTIES OF PALM KERNEL SHELL BY USING TORREFACTION ROTARY KILN

2021 ◽  
Author(s):  
NATTARAT CHUTWIBOONKUN ◽  
NAT THUCHAYAPONG ◽  
NATTAWUT THARAWADEE
2021 ◽  
Vol 407 ◽  
pp. 121-127
Author(s):  
Nattarat Chutwiboonkun ◽  
Sukum Kositchaimongkol ◽  
Nattawut Tharawadee

Torrefaction process is the innovation to improve the properties of biomass. Residence time is one of the parameters that affects the properties of torrefied biomass. The residence time of a rotary kiln is the time of biomass drop into the cylinder until getting out of the cylinder. So, the propose of this study is the effect of lifters, inclination angle and rotational speed on the residence time of a rotary kiln for the torrefaction process. Palm kernel shell was used in this research. Palm kernel was chopped and minced to reduce size. The rotary kiln (0.3 meters diameter 6 meters in length) was used in this research. The number of lifters in this research were 0, 1 and 2. The rotational speed were 1, 2 and 3 rpm. The inclination angle was 1, 3 and 5 degrees. The hopper was used for the feeding system. The time was collected from biomass drop into the cylinder until getting out of the cylinder. The results reveal that the number of lifters, rotational speed and inclination angle affects the residence time of the rotary kiln. The residence time of rotary kiln was an increase when the number of lifters increase. The residence time of the rotary kiln was decreased when the rotational speed and inclination angle increase. It can be concluded that the least residence time of rotary kiln was 86.94 minute at 0 lifters, 3 rpm and 5 degrees. The most residence time was 9.22 minute at 2 lifters, 1 rpm and 1 degree.


1982 ◽  
Vol 61 (3) ◽  
pp. 197-202
Author(s):  
Masami HIROSE ◽  
Kunio KAWAWADA ◽  
Hiroyuki AOKI ◽  
Hiroshi YANAI

2017 ◽  
Vol 16 (12) ◽  
pp. 2657-2663
Author(s):  
Jamaliah Idris ◽  
Siti Fadira Osman ◽  
Eyu Gaius ◽  
Chukwuekezie Christian

2021 ◽  
Vol 11 (4) ◽  
pp. 1630
Author(s):  
Yakubu Newman Monday ◽  
Jaafar Abdullah ◽  
Nor Azah Yusof ◽  
Suraya Abdul Rashid ◽  
Rafidah Hanim Shueb

Carbon dots (CDs), a nanomaterial synthesized from organic precursors rich in carbon content with excellent fluorescent property, are in high demand for many purposes, including sensing and biosensing applications. This research focused on preparing CDs from natural and abundant waste, palm kernel shells (PKS) obtained from palm oil biomass, aiming for sensing and biosensing applications. Ethylenediamine and L-phenylalanine doped CDs were produced via the hydrothermal and solvothermal methods using one-pot synthesis techniques in an autoclave batch reactor. The as-prepared N-CDs shows excellent photoluminescence (PL) property and a quantum yield (QY) of 13.7% for ethylenediamine (EDA) doped N-CDs (CDs-EDA) and 8.6% for L-phenylalanine (L-Ph) doped N-CDs (CDs-LPh) with an excitation/emission wavelength of 360 nm/450 nm. The transmission electron microscopy (TEM) images show the N-CDs have an average particle size of 2 nm for both CDs. UV-Visible spectrophotometric results showed C=C and C=O transition. FTIR results show and confirm the presence of functional groups, such as -OH, -C=O, -NH2 on the N-CDs, and the X-ray diffraction pattern showed that the N-CDs were crystalline, depicted with sharp peaks. This research work demonstrated that palm kernel shell biomass often thrown away as waste can produce CDs with excellent physicochemical properties.


2021 ◽  
Vol 1051 (1) ◽  
pp. 012054
Author(s):  
N A Najwa Annuar ◽  
N Kamarulzaman ◽  
Z F M Shadzalli ◽  
I H I Abdullah ◽  
P Y Liew ◽  
...  

2013 ◽  
Vol 701 ◽  
pp. 28-31 ◽  
Author(s):  
Rusila Zamani Abd Rashid ◽  
Hadi Purwanto ◽  
Hamzah Mohd Salleh ◽  
Mohd Hanafi Ani ◽  
Nurul Azhani Yunus ◽  
...  

This paper pertains to the reduction process of local low grade iron ore using palm kernel shell (PKS). It is well known that low grade iron ores contain high amount of gangue minerals and combined water. Biomass waste (aka agro-residues) from the palm oil industry is an attractive alternative fuel to replace coal as the source of energy in mineral processing, including for the treatment and processing of low grade iron ores. Both iron ore and PKS were mixed with minute addition of distilled water and then fabricated with average spherical diameter of 10-12mm. The green composite pellets were subjected to reduction test using an electric tube furnace. The rate of reduction increased as temperature increases up to 900 °C. The Fe content in the original ore increased almost 12% when 40 mass% of PKS was used. The reduction of 60:40 mass ratios of iron ore to PKS composite pellet produced almost 11.97 mass% of solid carbon which was dispersed uniformly on the surface of iron oxide. The aim of this work is to study carbon deposition of PKS in iron ore through reduction process. Utilization of carbon deposited in low grade iron ore is an interesting method for iron making process as this solid carbon can act as energy source in the reduction process.


RSC Advances ◽  
2020 ◽  
Vol 10 (45) ◽  
pp. 27183-27193
Author(s):  
Rose Fadzilah Abdullah ◽  
Umer Rashid ◽  
Yun Hin Taufiq-Yap ◽  
Mohd Lokman Ibrahim ◽  
Chawalit Ngamcharussrivichai ◽  
...  

The potential of bifunctional nanocatalysts obtained from waste palm kernel shell (PKS) was investigated for one-step transesterification–esterification under mild conditions.


2020 ◽  
Vol 31 ◽  
pp. 221-227 ◽  
Author(s):  
Eva Leones Dominguez ◽  
Arasu Uttran ◽  
Soh Kheang Loh ◽  
Marie-Hélène Manero ◽  
Richard Upperton ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document