scholarly journals Entacapone – Based Floating Microspheres by Ionotropic Gelation Technique-Morphology and Release Characteristics

2018 ◽  
Vol 10 (02) ◽  
Author(s):  
Suggala Ajay ◽  
Gande Suresh
Keyword(s):  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Sem Analysis ◽  
Potential Candidate ◽  
Ionotropic Gelation ◽  
Gastric Residence Time ◽  
Sustained Drug Delivery ◽  
Diffusion Studies ◽  
Gastro Retentive

The main objective of the present investigation was to develop gastro retentive floating microspheres for Entacapone. These are prepared by ionotropic gelation method with an aim of increasing the gastric residence time and for controlled release. The polymeric mixture of Sodium alginate and HPMC K4, was used as polymers. Sodium bicarbonate was used as the gas-forming gent. Prepared Microspheres were characterized for the Micromeretic properties, incorporation efficiency, buoyancy test, SEM analysis, FTIR, and in vitro diffusion studies. The diffusion studies were carried out in 0.1N HCl and the results were applied to various kinetic models. Among the total 14 formulations F14 was optimized. The % yield of F14 formulation was found to be 98.03%. Based on optical microscopy, the particle size was 65.23 ± 0.05μm. The % buoyancy, % entrapment efficiency and swelling index of F14 formulation was 98.16%, 97.54% and 97.67%, respectively. The cumulative % drug release of F14 formulation was 97.99 ± 5.05% in 12 h when compared with marketed product 95.12 ± 5.01 in 1 h. SEM studies showed the particles were in spherical shape. Hence the formulated and prepared floating Entacapone microspheres may establish to be potential candidate for safe and effective sustained drug delivery and improve the bioavailability in the management of Parkinson’s disease.

scholarly journals Development and Evaluation of Sustained Release Floating Microspheres Containing Ropinirole HCl

2018 ◽  
Vol 10 (03) ◽  
Author(s):  
Koppula Subbarao ◽  
Gande Suresh
Keyword(s):  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Sem Analysis ◽  
In Vitro Dissolution ◽  
Potential Candidate ◽  
Gastric Residence Time ◽  
Sustained Drug Delivery ◽  
Evaluation Parameters ◽  
Gastro Retentive

Current investigation was to develop gastro retentive floating microsphere for Ropinirole. These microspheres of Ropinirole were prepared by ionic gelation method with an aim of increasing the gastric residence time and for controlled release. Sodium alginate, HPMCK15, Gaur gum was used as polymers. Sodium bicarbonate was used as the gas-forming gent. Prepared microspheres were characterized for micromeretic properties, entrapment efficiency, buoyancy study, SEM analysis, FTIR, and in vitro dissolution studies. Among 14 formulations F12 was found to be optimized and based on the evaluation parameters. The % buoyancy, % yield, % entrapment efficiency and swelling index of F12 formulation was 94.50, 97.58, 98.10% and 96.14%, respectively. The Cumulative % drug release of F12 formulation was 98.16 ± 5.15 in 12 h when compared with marketed product 90.16 ± 5.00 in 12 h. SEM studies showed the particles were in spherical shape. Hence the formulated floating Ropinirole microspheres may establish to be potential candidate for safe and effective sustained drug delivery and improve the bioavailability in the effective management of Parkinson’s disease.

scholarly journals Nizatidine Based Floating Microspheres by Ionotropic Gelation Technique - Morphology and Release Characteristics

2018 ◽  
Vol 10 (03) ◽  
Author(s):  
D.V. R. N. Bhikshapathi ◽  
U. Ashok Kumar, ◽  
A. Shylaja Rani
Keyword(s):  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Sem Analysis ◽  
In Vitro Dissolution ◽  
H2 Receptor Antagonist ◽  
Histamine H2 Receptor ◽  
Ulcer Disease ◽  
Ionotropic Gelation ◽  
Dissolution Studies

Nizatidine is a histamine H2-receptor antagonist that inhibits stomach acid production and used in the treatment of peptic ulcer disease and gastroesophageal reflux disease. The main aim of the present investigation was to develop gastro retentive floating microspheres for Nizatidine. These are prepared by ionotropic gelation method with an aim of increasing the gastric residence time and for controlled release. The polymeric mixture of Sodium alginate and HPMCK4, HPMC K15M and HPMC K 100M, was used as polymers. Calcium carbonate was used as the gas forming gent. Prepared Microspheres were characterized for the Micromeretic properties, incorporation efficiency, buoyancy test, SEM analysis, FTIR, and in vitro dissolution studies. The dissolution studies were carried out in 0.1N HCl and the results were applied to various kinetic models. Among the total 18 formulations F17 was optimized. The % yield of F17 formulation was found to be 95.47 ± 0.36%. Based on optical microscopy, the particle size was 50.67 ± 0.13μm. The % buoyancy, % entrapment efficiency and swelling index of F17 formulation was 94.23%, 93.62 ± 0.29% and 92.13 ± 0.17%, respectively. The Cumulative % drug release of F17 formulation was 98.23 ± 5.49% in 12 h when compared with marketed product 95.87 ± 0.31 in 12 h. SEM studies showed the particles were in spherical shape. Based on obtained results, Floating alginate Nizatidine microspheres were of good candidate for targeting to GIT.

Formulation and Evaluation of Luliconazole Microsponges Loaded Gel for Topical Delivery

2021 ◽  
pp. 5775-5780
Author(s):  
Farhana Sultan ◽  
Himansu Chopra ◽  
Gyanendra Kumar Sharma
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Production Yield ◽  
In Vitro Drug Release ◽  
Eudragit Rs ◽  
Diffusion Studies

Microsponge containing Luliconazole (LCZ) with different proportion of drug:polymer (Ethyl cellulose and Eudragit RS 100) were obtained efficiently using Quasi-emulsion solvent diffusion method. Luliconazole is an anti-fungal drug used for the topical delivery. The purpose of the microsponge formulation is to control the release of LCZ drug to the skin through Microsponge Delivery System (MDS) known to be the novel technique which overcome the maximum concentration of active ingredient, frequency doses, and skin irritation. The prepared microsponges were examined using drug content, % production yield, % entrapment efficiency and in-vitro drug release. The formulation were subjected to in-vitro drug release studies for 6 hr in which it was concluded that Ethyl cellulose microsponges formulated by drug:polymer (1:1) and Eudragit RS 100 microsponges formulated by drug:polymer (1:3) showed maximum controlled release i.e., Increase in drug:polymer ratio (1:1 to 1:9) increased the production yield and entrapment efficiency of microsponges using Ethyl cellulose with no significant effect for Eudragit RS 100.Therefore, both formulation F1 and F2 was dispersed in carbopol gel preparation for controlled delivery of LCZ to the skin. Various physical parameters like pH, spreadability, viscosity and in-vitro drug diffusion studies were evaluated for the prepared gel formulations. Microsponge gel formulation i.e., FG1 showed better results for controlled release of 89.40% as compared to FG2 i.e., 92.18% over the period of 12 hrs which is performed in Franz Diffusion Cell. On basis of in-vitro diffusion studies for LCZ gel formulation, microsponges using Ethyl cellulose (FG1) was found to be best for its controlled release of LCZ for 12 hrs and followed zero order kinetics. Hence, formulated LCZ loaded gel have potential to treat fungal infections i.e., tinea pedis, tinea cruris and tinea corporis.

scholarly journals Formulation and evaluation of in-situ gels enriched with Tropicamide loaded solid lipid nanoparticles

2018 ◽  
Vol 9 (1) ◽  
pp. 216
Author(s):  
Jayachandra Reddy Peddappi Reddigari ◽  
Yerikala Ramesh ◽  
Chandrasekhar B. Kothapalli
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Research Work ◽  
Particle Morphology ◽  
Entrapment Efficiency ◽  
Adhesive Force ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Diffusion Studies

The present research work “Formulation and Evaluation of In-situ gels enriched with Tropicamide loaded solid lipid nanoparticles”. To overcome the problems of side effects and to increase the bioavailability of tropicamide loaded solid lipid nanoparticles are containing with suitable lipids (glycerin trimyristate, Tristearin, Phosphatidylcholine & soyabean lecithin) with stabilizers (poloxamer 188) and surfactant like polysorbate 80. The interaction between drug, lipids & polymer by performing with FTIR no incompatibility with each other. The particle morphology was carried out by SEM & AFM in solid lipid nanoparticle formulation. The particle size was ranges from 213.6 ± 2.16nm to 538.0 ± 6.53 nm. The zeta potential ranges form -18.3mV to 25.6mV. The entrapment efficiency of free tropicamide was ranges from 74.13 % to 90.17%. The drug content was ranges from 0.212mg/ml to 0.912mg/ml. The SLN formulations must be transparent white colour and semi solid consistency. The pH 7.0 to 8.0 in all formulation. The gelling strength of gels TSLNGF1 to TSLNGF12 was ranges from 72 ± 1 sec to 117 ± 2 sec. The bio adhesive force was ranges from 10.12 ±1.01 dynes/cm2 to 23.12 ± 1.91 dynes/cm2. The viscosity of prepared formulation ranges from 415 ± 1.94 cps to 652 ± 1.41 cps. The spread ability studies of all formulation were ranges from 09 gms/sec to 18 gms/sec. The Accelerated stability the formulations does not undergo any chemical Changes. In vitro Franz’s diffusion studies of SLN enriched in gels TSLNGF1 to TSLNGF12 among the various formulation best formulations was TSLNGF6; its follows first order kinetics. Keywords: Solid Lipid Nanoparticles; Tropicamide; In- situ gels; In vitro diffusion studies

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

Floating Microsphere of Curcumin as Targeted Gastro-retentive Drug Delivery System

2021 ◽  
pp. 5202-5206
Author(s):  
Anupam K Sachan ◽  
Saurabh Singh ◽  
Kiran Kumari ◽  
Pratibha Devi
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Entrapment Efficiency ◽  
Synthetic Polymers ◽  
Drug Bioavailability ◽  
Gastric Residence Time

Microspheres carrier system made from natural or synthetic polymers used in sustained release drug delivery system. The present study involves formulation and evaluation of floating microspheres of Curcumin for improving the drug bioavailability by prolongation gastric residence time. Curcumin, natural hypoglycemic agent is a lipophilic drug, absorbed poorly from the stomach, quickly eliminated and having short half-life so suitable to formulate floating drug delivery system for sustained release. Floating microspheres of curcumin were formulated by solvent evaporation technique using ethanol and dichloromethane (1:1) as organic solvent and incorporating various synthetic polymers as coating polymer, sustain release polymers and floating agent. The final formulation were evaluated various parameters such as compatibility studies, micrometric properties, In-vitro drug release and % buoyancy. FTIR studies showed that there were no interaction between drug and excipients. The surface morphology studies by SEM confirmed their spherical and smooth surface. The mean particles size were found to be 416-618µm, practical yield of microspheres was in the range of 60.21±0.052% - 80.87±0.043%, drug entrapment efficiency 47.4±0.065% - 77.9±0.036% and % buoyancy 62,24±0.161% - 88.63±0.413%. Result show that entraptmency increased as polymer (Eudragit RS100) conc. Increased. The drug release after 12 hrs. was 72.13% - 87.13% and it decrease as a polymer (HPMC, EC) concentration was decrease.

scholarly journals Transcutol® P Containing SLNs for Improving 8-Methoxypsoralen Skin Delivery

Pharmaceutics ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 973
Author(s):  
Giulia Pitzanti ◽  
Antonella Rosa ◽  
Mariella Nieddu ◽  
Donatella Valenti ◽  
Rosa Pireddu ◽  
...  
Keyword(s):  
Skin Permeation ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Skin Layer ◽  
Skin Permeability ◽  
Puva Therapy ◽  
Ultraviolet A ◽  
3T3 Fibroblasts ◽  
Skin Delivery

Topical psoralens plus ultraviolet A radiation (PUVA) therapy consists in the topical application of 8-methoxypsoralen (8-MOP) followed by the skin irradiation with ultraviolet A radiation. The employment of classical 8-MOP vehicles in topical PUVA therapy is associated with poor skin deposition and weak skin permeability of psoralens, thus requiring frequent drug administration. The aim of the present work was to formulate solid lipid nanoparticles (SLNs) able to increase the skin permeation of 8-MOP. For this purpose, the penetration enhancer Transcutol® P (TRC) was added to the SLN formulation. SLNs were characterized with respect to size, polydispersity index, zeta potential, entrapment efficiency, morphology, stability, and biocompatibility. Finally, 8-MOP skin diffusion and distribution within the skin layers was investigated using Franz cells and newborn pig skin. Freshly prepared nanoparticles showed spherical shape, mean diameters ranging between 120 and 133 nm, a fairly narrow size distribution, highly negative ζ potential values, and high entrapment efficiency. Empty and loaded formulations were almost stable over 30 days. In vitro penetration and permeation studies demonstrated a greater 8-MOP accumulation in each skin layer after SLN TRC 2% and TRC 4% application than that after SLN TRC 0% application. Finally, the results of experiments on 3T3 fibroblasts showed that the incorporation of TRC into SLNs could enhance the cellular uptake of nanoparticles, but it did not increase their cytotoxicity.

A COMPARATIVE ASSESSMENT OF VESICULAR FORMULATIONS: TRANSFERSOMES AND CONVENTIONAL LIPOSOMES LOADED IVABRADINE HYDROCHLORIDE

2020 ◽  
pp. 51-55
Author(s):  
GITA CHAURASIA ◽  
NARENDRA LARIYA
Keyword(s):  
Drug Release ◽  
Physical Stability ◽  
Physical Appearance ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Molar Ratio ◽  
Drug Release Study ◽  
Release Study

Objective: Ivabradine hydrochloride (IH), a benzazepine derivative used to treat cardiovascular disease angina pectoris. In this study IH-loaded novel carrier systems transfersomes (TFs) and conventional liposomes (CLs) were developed and compared for their efficacy to enhance the stability of drugs from degradation. Methods: TFs formulations (TF-1, TF-2 and TF-3) were prepared by using different biocompatible surfactants; tween-80 (TW), span-80(S) and sodium deoxycholate (SC) in the concentration ratio of 15 parts with 85 parts of soy phosphatidylcholine as phospholipid by thin-film hydration method. These vesicles were compared with CLs formulation (L-1) prepared in 7:3 molar ratio of soy phosphatidylcholine: cholesterol by following the same method. These vesicles were compared for physical appearance, vesicle shape, and size, percentage drug entrapment efficiency (%DEE), deformability index (DI), in vitro percentage cumulative drug release study, and physical stability studies. The chosen optimized novel carriers were observed under scanning electron microscopy. Results: The compared data demonstrated that the physical appearance for all vesicles was turbid and had a spherical shape. The size distribution was in the range of 129.0 nm to 273.5 nm in vesicles. The %DEE (79.0±0.94) and DI (35.0±1.9) was found maximum in TF-1 formulation that was 2.3 times higher than L-1 formulation. The in vitro percentage cumulative drug release study followed second-order polynomial kinetics that was 2.0 times higher than L-1and 2.9 times higher than the plain drug in 30 min (90.4±0.06%) from TF-1. The vesicles were found to be stable at refrigeration conditions. Conclusion: Thus, amongst of all vesicles TW loaded TFs (TF-1) was chosen as an excellent novel vesicular carrier for hydrophilic drugs due to its higher deformability behavior than CLs that protects the certain drugs from biodegradation and provides stability.

scholarly journals Formulation and Pharmacokinetic Evaluation of Ritonavir Floating Tablets in the Management of AIDS

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
R. Shireesh Kiran ◽  
B. Chandra Shekar ◽  
B. Nagendra Babu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Controlled Drug Release ◽  
In Vitro Dissolution ◽  
Gastric Residence Time ◽  
Dissolution Studies ◽  
Floating Tablet ◽  
Gastro Retentive

In the current study, gastro-retentive tablets of Ritonavir was developed to increase its oral bioavailability using hydrophilic polymers HPMC K 4M, K 15M, and K 100M as release retarding agents. Polyox WSR 303 was chosen as resin, sodium bicarbonate was used as effervescent agents. The tablets were prepared by direct compression method and FTIR studies revealed that there is no interaction between the drug and polymers used for the formulation. Among all the formulations F21 containing HPMC K 100M, Crospovidone, Polyox WSR 303 and sodium bicarbonate, as gas generating agent was choosen as optimized formulation based on the evaluation parameters, floating lag time (33 sec) and total floating time (>24 h) and in vitro dissolution studies. From in vitro dissolution studies, the optimized formulation F21 and marketed product was shown 98.67% and 95.09 ± 5.01% of drug release respectively. From in vivo bioavailability studies, after oral administration of floating tablet containing 100 mg Ritonavir, the Cmax, Tmax, and AUC0–∞ of optimized gastroretentive formulation were found to be 30.11 ± 1.16μg/mL, 8.00±1.23 h and 173 ± 26.34μg*h/ml, respectively. Cmax and AUC values of optimized formulation were found to be significantly higher than of marketed product, where longer gastric residence time is an important condition for prolonged or controlled drug release and also for improved bioavailability.

scholarly journals Formulation and Optimization of Zaltoprofen Loaded Ethosomal Gel by using 23 Full Factorial Designs

2021 ◽  
pp. 30-44
Author(s):  
K. Anju ◽  
Sneh Priya ◽  
D. S. Sandeep ◽  
Prashant Nayak ◽  
Pankaj Kumar ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Drug Candidate ◽  
Vesicle Size ◽  
Sustained Drug Delivery ◽  
Permeation Studies ◽  
Permeability Studies ◽  
Full Factorial

Aim:The objective of the present study is to design and characterize the ethosomal gel containing Zaltoprofen for sustained drug delivery and also to reduce the side effects. Zaltoprofen was chosen here as the drug candidate because of its short half-life and increased dosing frequency. Methods: The ethosomes containing Zaltoprofen was prepared by using cold method. A 23 full factorial design containing 10 experimental trails was used in order to obtain an optimized formulation. The prepared ethosomes were characterized by Scanning Electron Microscopy, PDI, zeta potential, vesicle size, and percentage entrapment efficiency. Optimized ethosomal formulation was incorporated in 1% carbopol gel to deliver the drug through topical route. Invitro drug permeation studies of ethosomal gel (EGL) and conventional gel (CGL) was conducted and flux and permeability coefficient were calculated. Results:The vesicle size, zeta potential, and % entrapment efficiency of optimized formulation were found to be 124.33 nm, -45.2 mV and 70.03%, respectively. The surface of the vesicles was found to be spherical and smooth. The in vitro drug release studies of the ethosomal gel formulation showed sustained drug delivery when compared with the conventional gel containing the pure drug. In vitro permeability studies show that the flux of ethosomal gel was 2.5 fold higher than conventional gel, which may be the attribution of ethanol and flexible nature of ethosomes. Conclusion: It was concluded that the ethosomal gel could be a better choice for the topical delivery of Zaltoprofenwith improved bioavailability for its anti-inflammatory activity.

Sign in / Sign up

Export Citation Format

Share Document