Preparation and In-vitro Evaluation of Fe3O4 Encapsulated by Chitosan Loaded Capecitabine Nanoparticles for the Treatment of Breast Cancer

2016 ◽  
Vol 6 (3) ◽  
Author(s):  
Shanmuganathan S. ◽  
Nigma S. ◽  
Anbarasan B. ◽  
Harika B.
Keyword(s):  
Fe3o4 Nanoparticles ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Evaluation ◽  
Sem Image ◽  
Therapeutic Molecules ◽  
Dialysis Method ◽  
Vitro Release

Nanoparticulate Carriers which is biodegradable, biocompatible and bio adhesive have significant feasible applications for administration of therapeutic molecules. The present study was aimed to formulate and optimise Capecitabine loaded Chitosan-Fe3O4 Nanoparticles and to study the in-vitro evaluation by sigma dialysis method. Capecitabine loaded chitosan – Fe3O4 nanoparticles batches with different ratios of drug: polymer (1:1, 1:2, 1:3, 1:4, 1:5, 1:6) were prepared by ionic gelation method. Increase in polymer concentration increases the nanoparticle drug content. Entrapment efficiency was 60.12% with drug to polymer ratio F3 (1:3). In-vitro release was found to be 65.20% for 12 hrs. Capecitabine from chitosanFe3O4 nanoparticles SEM image reveals discrete spherical structure and particles with size range of 100-500nm. FTIR studies represent the functional groups present with no characteristics change in formulations. Samples stored at refrigerator conditions showed better stability compared with samples kept at other conditions during 8 weeks of storage.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

scholarly journals Development and Evaluation of Rifampicin Loaded Alginate–Gelatin Biocomposite Microfibers

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1514
Author(s):  
Ameya Sharma ◽  
Vivek Puri ◽  
Pradeep Kumar ◽  
Inderbir Singh ◽  
Kampanart Huanbutta
Keyword(s):  
Wound Healing ◽  
Xanthan Gum ◽  
In Vitro Release ◽  
Antimicrobial Properties ◽  
Entrapment Efficiency ◽  
Tissue Proliferation ◽  
Naturally Occurring ◽  
Reinforcing Material ◽  
Vitro Release

Various systematic phases such as inflammation, tissue proliferation, and phases of remodeling characterize the process of wound healing. The natural matrix system is suggested to maintain and escalate these phases, and for that, microfibers were fabricated employing naturally occurring polymers (biopolymers) such as sodium alginate, gelatin and xanthan gum, and reinforcing material such as nanoclay was selected. The fabrication of fibers was executed with the aid of extrusion-gelation method. Rifampicin, an antibiotic, has been incorporated into a biopolymeric solution. RF1, RF2, RF3, RF4 and RF5 were coded as various formulation batches of microfibers. The microfibers were further characterized by different techniques such as SEM, DSC, XRD, and FTIR. Mechanical properties and physical evaluations such as entrapment efficiency, water uptake and in vitro release were also carried out to explain the comparative understanding of the formulation developed. The antimicrobial activity and whole blood clotting of fabricated fibers were additionally executed, hence they showed significant results, having excellent antimicrobial properties; they could be prominent carriers for wound healing applications.

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

DEVELOPMENT AND INVESTIGATION OF TIMOLOL MALEATE AND TRAVOPROST COMBINATION NIOSOMAL IN SITU GELLING SYSTEM FOR THE TREATMENT OF GLAUCOMA

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (07) ◽  
pp. 33-35
Author(s):  
A Dubey ◽  
◽  
P Prabhu ◽  
N Nair ◽  
K Beladiya ◽  
...  
Keyword(s):  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Timolol Maleate ◽  
In Situ Gel ◽  
Vesicle Size ◽  
Gelling Time ◽  
In Situ Gelling ◽  
Vitro Release

The aim of the present investigation was to develop a combination of timolol maleate and travoprost niosomal in situ gelling system for the treatment of glaucoma. Niosomes were prepared by thin film hydration technique using rotary flash evaporator. A 32 factorial design was utilized to study the effect of the molar ratio of Span 60 (X1) and cholesterol (X2) on vesicle size, drug entrapment efficiency and in vitro release study. On the basis of vesicle size, maximum entrapment efficiency and in vitro release of drug, best formulations were selected for the preparation of niosomal in situ gel (Drop). On the basis of gelling time and viscosity, optimized ratio of the polymers was selected for the desired preparation. Selected niosomal batches were dispersed in carbopol 940 and HPMC K4M polymer solution (combination IF6) to form in situ gel niosomal formulations (Drop). The gelling time of the niosomal in situ gel (NIF1) was found to be the best (+++) and the viscosity was found to be 1190 cP. Zeta potential, average size analysis, polydispersibility index value was found to be -45.1 mV, 256.5 nm, 0.228 respectively. In vitro drug release was found to be within the range of 50.23 ± 0.54 to 60.23 ± 0.33% over the period of 6 h. IOP lowering activity of best formulation (NIF1) showed more significant and sustained effect than the marketed eye drops. Best formulation (NIF1) was found to be stable, sterile, non irritant and isotonic. Hence niosomal in situ gelling combination system may have the potential of bringing better application than the conventional ocular therapy with improved ocular bioavailability and increased patient compliance.

LINAGLIPTIN AND GLICLAZIDE DI-LOADED EXTENDED-RELEASE NANOPARTICLES: FORMULATION AND EVALUATION

2021 ◽  
Vol 74 (9) ◽  
pp. 2315-2322
Author(s):  
Firas Aziz Rahi ◽  
Muath Sheet Mohammed Ameen ◽  
Mohammed Shamil Fayyadh
Keyword(s):  
Particle Size ◽  
Xanthan Gum ◽  
Extended Release ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Hplc Method ◽  
Electronic Microscopy ◽  
Vitro Release

The aim: This work aimed to formulate gliclazide and linagliptin extended-release nanoparticles. Materials and methods: A HPLC method was developed and validated to determine gliclazide and linagliptin at the same time without interference. The nanoparticles were prepared by emulsion solvent evaporation using two polymers, namely hydroxypropyl methylcellulose (HPMC) 4000 cps and xanthan gum. Results: Nanoparticles prepared were characterized for drug contents, production yield and entrapment efficiency, zeta potential, particle size, morphology by transmission electronic microscopy (TEM) and in-vitro release rate. The formulae GLH1, GLX1 and GHX1 showed release of linagliptin more than 75% after 8 hrs. While the only formula among the three (GHX1) showed release of gliclazide more than 80% after 8 h. So, the formula GHX1 showed acceptable release of more than 80% of both gliclazide and linagliptin after 8 h. Conclusions: The formula GHX1 which containing (0.5:1 xanthan gum: drugs) was the best nanoparticles formula which released more than 80% of both drugs after 8 h and could achieve good extended release over 24 h.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

Effect of Surfactants on Characteristic and In Vitro Release of Meloxicam Loaded in Deformable Liposomes

2012 ◽  
Vol 506 ◽  
pp. 457-460
Author(s):  
Sureewan Duangjit ◽  
Praneet Opanasopit ◽  
Theerasak Rojanarata ◽  
Tanasait Ngawhirunpat
Keyword(s):  
Drug Delivery ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sodium Cholate ◽  
Drug Delivery Carrier ◽  
Release Study ◽  
Water Insoluble Drug ◽  
Vitro Release ◽  
Potential Use

The aim of this study was to investigate the effect of surfactants on characteristic and in vitro release of liposomes containing meloxicam (MX), model of water insoluble drug. The potential use of deformable liposomes for drug delivery system was developed and investigated. The formulation composed of constant amount of phosphatidylcholine (PC) and MX and various amounts of cholesterol (Chol), sodium cholate (NaChol), sodium oleate (NaO) and stearylamine (SA) was formulated by reverse phase evaporation method. The vesicle size, zeta potential, morphology, entrapment efficiency, loading efficiency, stability andin vitrorelease study were evaluated. The result indicated that the entrapment efficiency andin vitrorelease study of vesicle formulations containing surfactants were significantly higher than the conventional liposome and MX suspension. The formulation of 10:2:2:5 PC/MX/Chol/NaO provided the maximum entrapment efficiency and drug release. Our research suggested that MX loaded in deformable liposomes containing surfactants can be potentially used as a drug delivery carrier for water insoluble drug.

Sign in / Sign up

Export Citation Format

Share Document