scholarly journals SYSTEM ELECTROMAGNETIC LOSS ANALYSIS AND TEMPERATURE FIELD ESTIMATE OF A MAGNETICALLY SUSPENDED MOTOR

2017 ◽  
Vol 55 ◽  
pp. 51-61 ◽  
Author(s):  
Xiaojun Ren ◽  
Yun Le ◽  
Bangcheng Han
Author(s):  
P.E. Batson

Use of the STEM to obtain precise electronic information has been hampered by the lack of energy loss analysis capable of a resolution and accuracy comparable to the 0.3eV energy width of the Field Emission Source. Recent work by Park, et. al. and earlier by Crewe, et. al. have promised magnetic sector devices that are capable of about 0.75eV resolution at collection angles (about 15mR) which are great enough to allow efficient use of the STEM probe current. These devices are also capable of 0.3eV resolution at smaller collection angles (4-5mR). The problem that arises, however, lies in the fact that, even with the collection efficiency approaching 1.0, several minutes of collection time are necessary for a good definition of a typical core loss or electronic transition. This is a result of the relatively small total beam current (1-10nA) that is available in the dedicated STEM. During this acquisition time, the STEM acceleration voltage may fluctuate by as much as 0.5-1.0V.


Author(s):  
N. Tamura ◽  
T. Goto ◽  
Y. Harada

On account of its high brightness, the field emission electron source has the advantage that it provides the conventional electron microscope with highly coherent illuminating system and that it directly improves the, resolving power of the scanning electron microscope. The present authors have reported some results obtained with a 100 kV field emission electron microscope.It has been proven, furthermore, that the tungsten emitter as a temperature field emission source can be utilized with a sufficient stability under a modest vacuum of 10-8 ~ 10-9 Torr. The present paper is concerned with an extension of our study on the characteristics of the temperature field emitters.


Author(s):  
M.V. Parthasarathy ◽  
C. Daugherty

The versatility of Low Temperature Field Emission SEM (LTFESEM) for viewing frozen-hydrated biological specimens, and the high resolutions that can be obtained with such instruments have been well documented. Studies done with LTFESEM have been usually limited to the viewing of small organisms, organs, cells, and organelles, or viewing such specimens after fracturing them.We use a Hitachi 4500 FESEM equipped with a recently developed BAL-TEC SCE 020 cryopreparation/transfer device for our LTFESEM studies. The SCE 020 is similar in design to the older SCU 020 except that instead of having a dedicated stage, the SCE 020 has a detachable cold stage that mounts on to the FESEM stage when needed. Since the SCE 020 has a precisely controlled lock manipulator for transferring the specimen table from the cryopreparation chamber to the cold stage in the FESEM, and also has a motor driven microtome for precise control of specimen fracture, we have explored the feasibility of using the LTFESEM for multiple-fracture studies of the same sample.


CICTP 2020 ◽  
2020 ◽  
Author(s):  
Zhizhong Zhao ◽  
Mengchen Li ◽  
Yu Wang ◽  
Wenwen Chen ◽  
Yulong Zhao ◽  
...  

2019 ◽  
pp. 90-111 ◽  
Author(s):  
Natalia S. Pavlova ◽  
Andrey Е. Shastitko

The article deals with the problem of determining market boundaries for antitrust law enforcement in the field of telecommunications. An empirical approach has been proposed for determining the product boundaries of the market in the area of mass distribution of messages, taking into account the comparative characteristics of the types and methods of notification (informing) of end users; the possibilities of switching from one way of informing to another, including the evolution of such opportunities under the influence of technological changes; switching between different notification methods. Based on the use of surveys of customers of sending SMS messages, it is shown that the product boundaries should include not only sending messages via SMS, but also e-mail, instant messengers, Push notifications and voice information. The paper illustrates the possibilities of applying the method of critical loss analysis to determining the boundaries of markets based on a mixture of surveys and economic modeling.


Sign in / Sign up

Export Citation Format

Share Document